Re: [PATCH 3/9] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/23/13 15:36, Juergen Beisert wrote:
> In order to support i.MX23 and i.MX28 within one driver we need to separate the
> register definitions which differ in both SoC variants.
> 
> Signed-off-by: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
> CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> CC: linux-input@xxxxxxxxxxxxxxx
> CC: devel@xxxxxxxxxxxxxxxxxxxx
> CC: Marek Vasut <marex@xxxxxxx>
> CC: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
> CC: Jonathan Cameron <jic23@xxxxxxxxx>
Applied to the togreg branch of iio.git

Thanks
> ---
>  drivers/staging/iio/adc/mxs-lradc.c | 61 ++++++++++++++++++++-----------------
>  1 file changed, 33 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
> index 3abc91f..f2fb10a 100644
> --- a/drivers/staging/iio/adc/mxs-lradc.c
> +++ b/drivers/staging/iio/adc/mxs-lradc.c
> @@ -182,24 +182,29 @@ struct mxs_lradc {
>  };
>  
>  #define	LRADC_CTRL0				0x00
> -#define	LRADC_CTRL0_TOUCH_DETECT_ENABLE		(1 << 23)
> -#define	LRADC_CTRL0_TOUCH_SCREEN_TYPE		(1 << 22)
> -#define	LRADC_CTRL0_YNNSW	/* YM */	(1 << 21)
> -#define	LRADC_CTRL0_YPNSW	/* YP */	(1 << 20)
> -#define	LRADC_CTRL0_YPPSW	/* YP */	(1 << 19)
> -#define	LRADC_CTRL0_XNNSW	/* XM */	(1 << 18)
> -#define	LRADC_CTRL0_XNPSW	/* XM */	(1 << 17)
> -#define	LRADC_CTRL0_XPPSW	/* XP */	(1 << 16)
> -#define	LRADC_CTRL0_PLATE_MASK			(0x3f << 16)
> +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE	(1 << 23)
> +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE	(1 << 22)
> +# define LRADC_CTRL0_MX28_YNNSW	/* YM */	(1 << 21)
> +# define LRADC_CTRL0_MX28_YPNSW	/* YP */	(1 << 20)
> +# define LRADC_CTRL0_MX28_YPPSW	/* YP */	(1 << 19)
> +# define LRADC_CTRL0_MX28_XNNSW	/* XM */	(1 << 18)
> +# define LRADC_CTRL0_MX28_XNPSW	/* XM */	(1 << 17)
> +# define LRADC_CTRL0_MX28_XPPSW	/* XP */	(1 << 16)
> +
> +# define LRADC_CTRL0_MX28_PLATE_MASK \
> +		(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
> +		LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
> +		LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
> +		LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
>  
>  #define	LRADC_CTRL1				0x10
>  #define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN		(1 << 24)
>  #define	LRADC_CTRL1_LRADC_IRQ_EN(n)		(1 << ((n) + 16))
> -#define	LRADC_CTRL1_LRADC_IRQ_EN_MASK		(0x1fff << 16)
> +#define	LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK	(0x1fff << 16)
>  #define	LRADC_CTRL1_LRADC_IRQ_EN_OFFSET		16
>  #define	LRADC_CTRL1_TOUCH_DETECT_IRQ		(1 << 8)
>  #define	LRADC_CTRL1_LRADC_IRQ(n)		(1 << (n))
> -#define	LRADC_CTRL1_LRADC_IRQ_MASK		0x1fff
> +#define	LRADC_CTRL1_MX28_LRADC_IRQ_MASK		0x1fff
>  #define	LRADC_CTRL1_LRADC_IRQ_OFFSET		0
>  
>  #define	LRADC_CTRL2				0x20
> @@ -267,7 +272,7 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
>  	 * Virtual channel 0 is always used here as the others are always not
>  	 * used if doing raw sampling.
>  	 */
> -	writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
> +	writel(LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
>  	writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
>  
> @@ -322,9 +327,9 @@ static int mxs_lradc_ts_touched(struct mxs_lradc *lradc)
>  	uint32_t reg;
>  
>  	/* Enable touch detection. */
> -	writel(LRADC_CTRL0_PLATE_MASK,
> +	writel(LRADC_CTRL0_MX28_PLATE_MASK,
>  		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
> -	writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
> +	writel(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
>  		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
>  
>  	msleep(LRADC_TS_SAMPLE_DELAY_MS);
> @@ -370,21 +375,21 @@ static int32_t mxs_lradc_ts_sample(struct mxs_lradc *lradc,
>  	 */
>  	switch (plate) {
>  	case LRADC_SAMPLE_X:
> -		ctrl0 = LRADC_CTRL0_XPPSW | LRADC_CTRL0_XNNSW;
> +		ctrl0 = LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
>  		chan = 3;
>  		break;
>  	case LRADC_SAMPLE_Y:
> -		ctrl0 = LRADC_CTRL0_YPPSW | LRADC_CTRL0_YNNSW;
> +		ctrl0 = LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
>  		chan = 4;
>  		break;
>  	case LRADC_SAMPLE_PRESSURE:
> -		ctrl0 = LRADC_CTRL0_YPPSW | LRADC_CTRL0_XNNSW;
> +		ctrl0 = LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
>  		chan = 5;
>  		break;
>  	}
>  
>  	if (change) {
> -		writel(LRADC_CTRL0_PLATE_MASK,
> +		writel(LRADC_CTRL0_MX28_PLATE_MASK,
>  			lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
>  		writel(ctrl0, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
>  
> @@ -445,7 +450,7 @@ static void mxs_lradc_ts_work(struct work_struct *ts_work)
>  
>  	while (mxs_lradc_ts_touched(lradc)) {
>  		/* Disable touch detector so we can sample the touchscreen. */
> -		writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
> +		writel(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
>  			lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
>  
>  		if (likely(valid)) {
> @@ -494,7 +499,7 @@ static int mxs_lradc_ts_open(struct input_dev *dev)
>  	lradc->stop_touchscreen = false;
>  
>  	/* Enable the touch-detect circuitry. */
> -	writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
> +	writel(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
>  		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
>  
>  	/* Enable the touch-detect IRQ. */
> @@ -520,7 +525,7 @@ static void mxs_lradc_ts_close(struct input_dev *dev)
>  		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
>  
>  	/* Power-down touchscreen touch-detect circuitry. */
> -	writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
> +	writel(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
>  		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
>  }
>  
> @@ -584,7 +589,7 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
>  		LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
>  		LRADC_CTRL1_TOUCH_DETECT_IRQ;
>  
> -	if (!(reg & LRADC_CTRL1_LRADC_IRQ_MASK))
> +	if (!(reg & LRADC_CTRL1_MX28_LRADC_IRQ_MASK))
>  		return IRQ_NONE;
>  
>  	/*
> @@ -604,7 +609,7 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
>  	else if (reg & LRADC_CTRL1_LRADC_IRQ(0))
>  		complete(&lradc->completion);
>  
> -	writel(reg & LRADC_CTRL1_LRADC_IRQ_MASK,
> +	writel(reg & LRADC_CTRL1_MX28_LRADC_IRQ_MASK,
>  		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
>  
>  	return IRQ_HANDLED;
> @@ -725,7 +730,7 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
>  	if (ret < 0)
>  		goto err_buf;
>  
> -	writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
> +	writel(LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
>  	writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
>  
> @@ -766,7 +771,7 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
>  		lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR);
>  
>  	writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
> -	writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
> +	writel(LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
>  
>  	kfree(lradc->buffer);
> @@ -870,11 +875,11 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
>  	writel(0, lradc->base + LRADC_DELAY(3));
>  
>  	/* Configure the touchscreen type */
> -	writel(LRADC_CTRL0_TOUCH_SCREEN_TYPE,
> +	writel(LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
>  		lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
>  
>  	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) {
> -		writel(LRADC_CTRL0_TOUCH_SCREEN_TYPE,
> +		writel(LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
>  			lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
>  	}
>  
> @@ -888,7 +893,7 @@ static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
>  {
>  	int i;
>  
> -	writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
> +	writel(LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
>  		lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
>  
>  	for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++)
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux