Thank you for review.
I revised on your advice.
I will send v3 patch in the course of today.
reply about your question inline
> On Mon, Sep 09, 2013 at 07:10:41AM +0100, Beomho Seo wrote:
>> This patch add device tree binding documentation for CM36651
>> proximity/light sensor.
>>
>> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/iio/light/cm36651.txt | 24
>> ++++++++++++++++++++
>> .../devicetree/bindings/vendor-prefixes.txt | 1 +
>> 2 files changed, 25 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/cm36651.txt
>> b/Documentation/devicetree/bindings/iio/light/cm36651.txt
>> new file mode 100644
>> index 0000000..3a6ba38
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/cm36651.txt
>> @@ -0,0 +1,24 @@
>> +* Capella CM36651 I2C Proximity and Color Light sensor
>> +
>> +Required properties:
>> +- compatible: must be "capella,cm36651"
>> +- reg: the I2C address of the device
>> +- interrupts: interrupt to which the chip is connected
>
> Nit: I'd prefer something like the below:
>
> - interrupts: interrupt-specifier for the sole interrupt generated by
> the device.
>
>> +- vled-supply: regulator for the sensor device, as covered
>> + in ../../regulator/regulator.txt
>
> I assume by the name that this is the regulator for the LED that's used
> alongside the sensor, rather than for the sensor itself?
>
> Is the LED part of the CM36651 unit, or is it external? I couldn't find
> any documentation for the unit.
>
vled_suppy is the regulator for the IR LED. In order to cm36651 manual, IR_LED part of the cm36651 unit.
>> +
>> +Example:
>> +
>> + i2c_cm36651: i2c-gpio {
>> + /* ... */
>> +
>> + cm36651@18 {
>> + compatible = "capella,cm36651";
>> + reg = <0x18>;
>> + interrupt-parent = <&gpx0>;
>> + interrupts = <2 0>;
>> + vled-supply = <&ps_als_reg>;
>> + };
>> +
>> + /* ... */
>> + };
>> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> index ec4d713..044796d 100644
>> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> @@ -17,6 +17,7 @@ brcm Broadcom Corporation
>> cavium Cavium, Inc.
>> chrp Common Hardware Reference Platform
>> cirrus Cirrus Logic, Inc.
>> +capella Capella Microsystems, Inc
>
> The vendor prefix looks OK to me. However, it should apper before cavium
> to maintain the ordering of the file.
>
> Thanks,
> Mark.
>
>> cortina Cortina Systems, Inc.
>> dallas Maxim Integrated Products (formerly Dallas Semiconductor)
>> davicom DAVICOM Semiconductor, Inc.
>> --
>> 1.7.9.5
>>
>> --
>> Beomho Seo, Assistant Engineer
>> System S/W Lab., S/W Platform Team, Software Center
>> Samsung Electronics
>>
>
--
Best Regards,
Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
