On 09/10/13 13:49, Lee Jones wrote: > The LSM303DLH's WAI (WhoAmI) is 0x33, meaning it should be enabled by > Accel Sensor group one. For the device to probe without error, we'll > need to ensure it's registered with the correct WAI. > > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> You clearly have a better datasheet than I have as for that part it doesn't even claim to have the relevant register to read a who am I from. Now that datasheet does list odr values as 50, 100, 400 1000 which would put it where it originally was in these tables. http://www.st.com/web/en/resource/technical/document/datasheet/CD00260288.pdf I haven't checked other elements... I'm confused but suspect we may need another type entry to deal with this one. > --- > drivers/iio/accel/st_accel_core.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c > index ea62291..03a2b6b 100644 > --- a/drivers/iio/accel/st_accel_core.c > +++ b/drivers/iio/accel/st_accel_core.c > @@ -170,6 +170,7 @@ static const struct st_sensors st_accel_sensors[] = { > [2] = LSM330D_ACCEL_DEV_NAME, > [3] = LSM330DL_ACCEL_DEV_NAME, > [4] = LSM330DLC_ACCEL_DEV_NAME, > + [5] = LSM303DLH_ACCEL_DEV_NAME, > }, > .ch = (struct iio_chan_spec *)st_accel_12bit_channels, > .odr = { > @@ -238,8 +239,7 @@ static const struct st_sensors st_accel_sensors[] = { > .sensors_supported = { > [0] = LIS331DLH_ACCEL_DEV_NAME, > [1] = LSM303DL_ACCEL_DEV_NAME, > - [2] = LSM303DLH_ACCEL_DEV_NAME, > - [3] = LSM303DLM_ACCEL_DEV_NAME, > + [2] = LSM303DLM_ACCEL_DEV_NAME, > }, > .ch = (struct iio_chan_spec *)st_accel_12bit_channels, > .odr = { > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
