Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
---
drivers/staging/iio/dac/ad5791.c | 122 +++++++++++++++++---------------------
1 file changed, 53 insertions(+), 69 deletions(-)
diff --git a/drivers/staging/iio/dac/ad5791.c b/drivers/staging/iio/dac/ad5791.c
index 13d8b5b..ad33725 100644
--- a/drivers/staging/iio/dac/ad5791.c
+++ b/drivers/staging/iio/dac/ad5791.c
@@ -72,71 +72,50 @@ static int ad5791_spi_read(struct spi_device *spi, u8 addr, u32 *val)
return ret;
}
-#define AD5791_CHAN(bits, shift) { \
- .type = IIO_VOLTAGE, \
- .output = 1, \
- .indexed = 1, \
- .address = AD5791_ADDR_DAC0, \
- .channel = 0, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
- IIO_CHAN_INFO_SCALE_SHARED_BIT | \
- IIO_CHAN_INFO_OFFSET_SHARED_BIT, \
- .scan_type = IIO_ST('u', bits, 24, shift) \
-}
-
-static const struct iio_chan_spec ad5791_channels[] = {
- [ID_AD5760] = AD5791_CHAN(16, 4),
- [ID_AD5780] = AD5791_CHAN(18, 2),
- [ID_AD5781] = AD5791_CHAN(18, 2),
- [ID_AD5791] = AD5791_CHAN(20, 0)
+static const char * const ad5791_powerdown_modes[] = {
+ "6kohm_to_gnd",
+ "three_state",
};
-static ssize_t ad5791_read_powerdown_mode(struct device *dev,
- struct device_attribute *attr, char *buf)
+static int ad5791_get_powerdown_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad5791_state *st = iio_priv(indio_dev);
- const char mode[][14] = {"6kohm_to_gnd", "three_state"};
-
- return sprintf(buf, "%s\n", mode[st->pwr_down_mode]);
+ return st->pwr_down_mode;
}
-static ssize_t ad5791_write_powerdown_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
+static int ad5791_set_powerdown_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, unsigned int mode)
{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad5791_state *st = iio_priv(indio_dev);
- int ret;
- if (sysfs_streq(buf, "6kohm_to_gnd"))
- st->pwr_down_mode = AD5791_DAC_PWRDN_6K;
- else if (sysfs_streq(buf, "three_state"))
- st->pwr_down_mode = AD5791_DAC_PWRDN_3STATE;
- else
- ret = -EINVAL;
+ st->pwr_down_mode = mode;
- return ret ? ret : len;
+ return 0;
}
-static ssize_t ad5791_read_dac_powerdown(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static const struct iio_enum ad5791_powerdown_mode_enum = {
+ .items = ad5791_powerdown_modes,
+ .num_items = ARRAY_SIZE(ad5791_powerdown_modes),
+ .get = ad5791_get_powerdown_mode,
+ .set = ad5791_set_powerdown_mode,
+};
+
+static ssize_t ad5791_read_dac_powerdown(struct iio_dev *indio_dev,
+ uintptr_t private, const struct iio_chan_spec *chan, char *buf)
{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad5791_state *st = iio_priv(indio_dev);
return sprintf(buf, "%d\n", st->pwr_down);
}
-static ssize_t ad5791_write_dac_powerdown(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
+static ssize_t ad5791_write_dac_powerdown(struct iio_dev *indio_dev,
+ uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
+ size_t len)
{
long readin;
int ret;
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad5791_state *st = iio_priv(indio_dev);
ret = strict_strtol(buf, 10, &readin);
@@ -160,31 +139,6 @@ static ssize_t ad5791_write_dac_powerdown(struct device *dev,
return ret ? ret : len;
}
-static IIO_DEVICE_ATTR(out_voltage_powerdown_mode, S_IRUGO |
- S_IWUSR, ad5791_read_powerdown_mode,
- ad5791_write_powerdown_mode, 0);
-
-static IIO_CONST_ATTR(out_voltage_powerdown_mode_available,
- "6kohm_to_gnd three_state");
-
-#define IIO_DEV_ATTR_DAC_POWERDOWN(_num, _show, _store, _addr) \
- IIO_DEVICE_ATTR(out_voltage##_num##_powerdown, \
- S_IRUGO | S_IWUSR, _show, _store, _addr)
-
-static IIO_DEV_ATTR_DAC_POWERDOWN(0, ad5791_read_dac_powerdown,
- ad5791_write_dac_powerdown, 0);
-
-static struct attribute *ad5791_attributes[] = {
- &iio_dev_attr_out_voltage0_powerdown.dev_attr.attr,
- &iio_dev_attr_out_voltage_powerdown_mode.dev_attr.attr,
- &iio_const_attr_out_voltage_powerdown_mode_available.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group ad5791_attribute_group = {
- .attrs = ad5791_attributes,
-};
-
static int ad5791_get_lin_comp(unsigned int span)
{
if (span <= 10000)
@@ -254,6 +208,37 @@ static int ad5791_read_raw(struct iio_dev *indio_dev,
};
+static const struct iio_chan_spec_ext_info ad5791_ext_info[] = {
+ {
+ .name = "powerdown",
+ .shared = true,
+ .read = ad5791_read_dac_powerdown,
+ .write = ad5791_write_dac_powerdown,
+ },
+ IIO_ENUM("powerdown_mode", true, &ad5791_powerdown_mode_enum),
+ IIO_ENUM_AVAILABLE("powerdown_mode", &ad5791_powerdown_mode_enum),
+ { },
+};
+
+#define AD5791_CHAN(bits, shift) { \
+ .type = IIO_VOLTAGE, \
+ .output = 1, \
+ .indexed = 1, \
+ .address = AD5791_ADDR_DAC0, \
+ .channel = 0, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT | \
+ IIO_CHAN_INFO_OFFSET_SHARED_BIT, \
+ .scan_type = IIO_ST('u', bits, 24, shift), \
+ .ext_info = ad5791_ext_info, \
+}
+
+static const struct iio_chan_spec ad5791_channels[] = {
+ [ID_AD5760] = AD5791_CHAN(16, 4),
+ [ID_AD5780] = AD5791_CHAN(18, 2),
+ [ID_AD5781] = AD5791_CHAN(18, 2),
+ [ID_AD5791] = AD5791_CHAN(20, 0)
+};
static int ad5791_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
@@ -278,7 +263,6 @@ static int ad5791_write_raw(struct iio_dev *indio_dev,
static const struct iio_info ad5791_info = {
.read_raw = &ad5791_read_raw,
.write_raw = &ad5791_write_raw,
- .attrs = &ad5791_attribute_group,
.driver_module = THIS_MODULE,
};
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
