Re: [RFC 7/8] staging:iio:dac:ad5686: Convert to extended channel attributes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/11/2012 04:53 PM, Lars-Peter Clausen wrote:
> Use extended channel attributes instead of raw sysfs files for the additional
> channel attributes. This allows us to remove some boilerplate code.
> 
> Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> ---
>  drivers/staging/iio/dac/ad5686.c |  193 +++++++++++++++-----------------------
>  1 file changed, 77 insertions(+), 116 deletions(-)
> 
> diff --git a/drivers/staging/iio/dac/ad5686.c b/drivers/staging/iio/dac/ad5686.c
> index 46239b3..cf833c9 100644
> --- a/drivers/staging/iio/dac/ad5686.c
> +++ b/drivers/staging/iio/dac/ad5686.c
> @@ -92,40 +92,6 @@ enum ad5686_supported_device_ids {
>  	ID_AD5685,
>  	ID_AD5686,
>  };
> -#define AD5868_CHANNEL(chan, bits, shift) {			\
> -		.type = IIO_VOLTAGE,				\
> -		.indexed = 1,					\
> -		.output = 1,					\
> -		.channel = chan,				\
> -		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
> -		IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
> -		.address = AD5686_ADDR_DAC(chan),			\
> -		.scan_type = IIO_ST('u', bits, 16, shift)	\
> -}
> -static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
> -	[ID_AD5684] = {
> -		.channel[0] = AD5868_CHANNEL(0, 12, 4),
> -		.channel[1] = AD5868_CHANNEL(1, 12, 4),
> -		.channel[2] = AD5868_CHANNEL(2, 12, 4),
> -		.channel[3] = AD5868_CHANNEL(3, 12, 4),
> -		.int_vref_mv = 2500,
> -	},
> -	[ID_AD5685] = {
> -		.channel[0] = AD5868_CHANNEL(0, 14, 2),
> -		.channel[1] = AD5868_CHANNEL(1, 14, 2),
> -		.channel[2] = AD5868_CHANNEL(2, 14, 2),
> -		.channel[3] = AD5868_CHANNEL(3, 14, 2),
> -		.int_vref_mv = 2500,
> -	},
> -	[ID_AD5686] = {
> -		.channel[0] = AD5868_CHANNEL(0, 16, 0),
> -		.channel[1] = AD5868_CHANNEL(1, 16, 0),
> -		.channel[2] = AD5868_CHANNEL(2, 16, 0),
> -		.channel[3] = AD5868_CHANNEL(3, 16, 0),
> -		.int_vref_mv = 2500,
> -	},
> -};
> -
>  static int ad5686_spi_write(struct ad5686_state *st,
>  			     u8 cmd, u8 addr, u16 val, u8 shift)
>  {
> @@ -169,73 +135,63 @@ static int ad5686_spi_read(struct ad5686_state *st, u8 addr)
>  	return be32_to_cpu(st->data[2].d32);
>  }
>  
> -static ssize_t ad5686_read_powerdown_mode(struct device *dev,
> -				      struct device_attribute *attr, char *buf)
> +static const char * const ad5686_powerdown_modes[] = {
> +	"1kohm_to_gnd",
> +	"100kohm_to_gnd",
> +	"three_state"
> +};
> +
> +static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev,
> +	const struct iio_chan_spec *chan)
>  {
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>  	struct ad5686_state *st = iio_priv(indio_dev);
> -	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> -
> -	char mode[][15] = {"", "1kohm_to_gnd", "100kohm_to_gnd", "three_state"};
>  
> -	return sprintf(buf, "%s\n", mode[(st->pwr_down_mode >>
> -					 (this_attr->address * 2)) & 0x3]);
> +	return ((st->pwr_down_mode >> (chan->channel * 2)) & 0x3) - 1;
>  }
>  
> -static ssize_t ad5686_write_powerdown_mode(struct device *dev,
> -				       struct device_attribute *attr,
> -				       const char *buf, size_t len)
> +static int ad5686_set_powerdown_mode(struct iio_dev *indio_dev,
> +	const struct iio_chan_spec *chan, unsigned int mode)
>  {
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>  	struct ad5686_state *st = iio_priv(indio_dev);
> -	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> -	unsigned mode;
> -
> -	if (sysfs_streq(buf, "1kohm_to_gnd"))
> -		mode = AD5686_LDAC_PWRDN_1K;
> -	else if (sysfs_streq(buf, "100kohm_to_gnd"))
> -		mode = AD5686_LDAC_PWRDN_100K;
> -	else if (sysfs_streq(buf, "three_state"))
> -		mode = AD5686_LDAC_PWRDN_3STATE;
> -	else
> -		return  -EINVAL;
>  
> -	st->pwr_down_mode &= ~(0x3 << (this_attr->address * 2));
> -	st->pwr_down_mode |= (mode << (this_attr->address * 2));
> +	st->pwr_down_mode &= ~(0x3 << (chan->channel * 2));
> +	st->pwr_down_mode |= ((mode + 1) << (chan->channel * 2));
>  
> -	return len;
> +	return 0;
>  }
>  
> -static ssize_t ad5686_read_dac_powerdown(struct device *dev,
> -					   struct device_attribute *attr,
> -					   char *buf)
> +static const struct iio_enum ad5686_powerdown_mode_enum = {
> +	.items = ad5686_powerdown_modes,
> +	.num_items = ARRAY_SIZE(ad5686_powerdown_modes),
> +	.get = ad5686_get_powerdown_mode,
> +	.set = ad5686_set_powerdown_mode,
> +};
> +
> +static ssize_t ad5686_read_dac_powerdown(struct iio_dev *indio_dev,
> +	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
>  {
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>  	struct ad5686_state *st = iio_priv(indio_dev);
> -	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
>  
>  	return sprintf(buf, "%d\n", !!(st->pwr_down_mask &
> -			(0x3 << (this_attr->address * 2))));
> +			(0x3 << (chan->channel * 2))));
>  }
>  
> -static ssize_t ad5686_write_dac_powerdown(struct device *dev,
> -					    struct device_attribute *attr,
> -					    const char *buf, size_t len)
> +static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
> +	 uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
> +	 size_t len)
>  {
>  	bool readin;
>  	int ret;
> -	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>  	struct ad5686_state *st = iio_priv(indio_dev);
> -	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
>  
>  	ret = strtobool(buf, &readin);
>  	if (ret)
>  		return ret;
>  
>  	if (readin == true)
> -		st->pwr_down_mask |= (0x3 << (this_attr->address * 2));
> +		st->pwr_down_mask |= (0x3 << (chan->channel * 2));
>  	else
> -		st->pwr_down_mask &= ~(0x3 << (this_attr->address * 2));
> +		st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
>  
>  	ret = ad5686_spi_write(st, AD5686_CMD_POWERDOWN_DAC, 0,
>  			       st->pwr_down_mask & st->pwr_down_mode, 0);
> @@ -243,48 +199,6 @@ static ssize_t ad5686_write_dac_powerdown(struct device *dev,
>  	return ret ? ret : len;
>  }
>  
> -static IIO_CONST_ATTR(out_voltage_powerdown_mode_available,
> -			"1kohm_to_gnd 100kohm_to_gnd three_state");
> -
> -#define IIO_DEV_ATTR_DAC_POWERDOWN_MODE(_num)				\
> -	IIO_DEVICE_ATTR(out_voltage##_num##_powerdown_mode,		\
> -			S_IRUGO | S_IWUSR,				\
> -			ad5686_read_powerdown_mode,			\
> -			ad5686_write_powerdown_mode, _num)
> -
> -static IIO_DEV_ATTR_DAC_POWERDOWN_MODE(0);
> -static IIO_DEV_ATTR_DAC_POWERDOWN_MODE(1);
> -static IIO_DEV_ATTR_DAC_POWERDOWN_MODE(2);
> -static IIO_DEV_ATTR_DAC_POWERDOWN_MODE(3);
> -
> -#define IIO_DEV_ATTR_DAC_POWERDOWN(_num)				\
> -	IIO_DEVICE_ATTR(out_voltage##_num##_powerdown,			\
> -			S_IRUGO | S_IWUSR,				\
> -			ad5686_read_dac_powerdown,			\
> -			ad5686_write_dac_powerdown, _num)
> -
> -static IIO_DEV_ATTR_DAC_POWERDOWN(0);
> -static IIO_DEV_ATTR_DAC_POWERDOWN(1);
> -static IIO_DEV_ATTR_DAC_POWERDOWN(2);
> -static IIO_DEV_ATTR_DAC_POWERDOWN(3);
> -
> -static struct attribute *ad5686_attributes[] = {
> -	&iio_dev_attr_out_voltage0_powerdown.dev_attr.attr,
> -	&iio_dev_attr_out_voltage1_powerdown.dev_attr.attr,
> -	&iio_dev_attr_out_voltage2_powerdown.dev_attr.attr,
> -	&iio_dev_attr_out_voltage3_powerdown.dev_attr.attr,
> -	&iio_dev_attr_out_voltage0_powerdown_mode.dev_attr.attr,
> -	&iio_dev_attr_out_voltage1_powerdown_mode.dev_attr.attr,
> -	&iio_dev_attr_out_voltage2_powerdown_mode.dev_attr.attr,
> -	&iio_dev_attr_out_voltage3_powerdown_mode.dev_attr.attr,
> -	&iio_const_attr_out_voltage_powerdown_mode_available.dev_attr.attr,
> -	NULL,
> -};
> -
> -static const struct attribute_group ad5686_attribute_group = {
> -	.attrs = ad5686_attributes,
> -};
> -
>  static int ad5686_read_raw(struct iio_dev *indio_dev,
>  			   struct iio_chan_spec const *chan,
>  			   int *val,
> @@ -348,10 +262,57 @@ static int ad5686_write_raw(struct iio_dev *indio_dev,
>  static const struct iio_info ad5686_info = {
>  	.read_raw = ad5686_read_raw,
>  	.write_raw = ad5686_write_raw,
> -	.attrs = &ad5686_attribute_group,
>  	.driver_module = THIS_MODULE,
>  };
>  
> +static const struct iio_chan_spec_ext_info ad5686_ext_info[] = {
> +	{
> +		.name = "powerdown",
> +		.read = ad5686_read_dac_powerdown,
> +		.write = ad5686_write_dac_powerdown,
> +	},
> +	IIO_ENUM("powerdown_mode", false, &ad5686_powerdown_mode_enum),
> +	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5686_powerdown_mode_enum),
> +	{ },
> +};
> +
> +#define AD5868_CHANNEL(chan, bits, shift) {			\
> +		.type = IIO_VOLTAGE,				\
> +		.indexed = 1,					\
> +		.output = 1,					\
> +		.channel = chan,				\
> +		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
> +		IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
> +		.address = AD5686_ADDR_DAC(chan),			\
> +		.scan_type = IIO_ST('u', bits, 16, shift),	\
> +		.ext_info = ad5686_ext_info,			\
> +}
> +
> +static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
> +	[ID_AD5684] = {
> +		.channel[0] = AD5868_CHANNEL(0, 12, 4),
> +		.channel[1] = AD5868_CHANNEL(1, 12, 4),
> +		.channel[2] = AD5868_CHANNEL(2, 12, 4),
> +		.channel[3] = AD5868_CHANNEL(3, 12, 4),
> +		.int_vref_mv = 2500,
> +	},
> +	[ID_AD5685] = {
> +		.channel[0] = AD5868_CHANNEL(0, 14, 2),
> +		.channel[1] = AD5868_CHANNEL(1, 14, 2),
> +		.channel[2] = AD5868_CHANNEL(2, 14, 2),
> +		.channel[3] = AD5868_CHANNEL(3, 14, 2),
> +		.int_vref_mv = 2500,
> +	},
> +	[ID_AD5686] = {
> +		.channel[0] = AD5868_CHANNEL(0, 16, 0),
> +		.channel[1] = AD5868_CHANNEL(1, 16, 0),
> +		.channel[2] = AD5868_CHANNEL(2, 16, 0),
> +		.channel[3] = AD5868_CHANNEL(3, 16, 0),
> +		.int_vref_mv = 2500,
> +	},
> +};
> +
> +
>  static int __devinit ad5686_probe(struct spi_device *spi)
>  {
>  	struct ad5686_state *st;

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux