Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
drivers/staging/iio/dac/ad5624r_spi.c | 209 ++++++++++++++-------------------
1 file changed, 91 insertions(+), 118 deletions(-)
diff --git a/drivers/staging/iio/dac/ad5624r_spi.c b/drivers/staging/iio/dac/ad5624r_spi.c
index 646b448..ef6a320 100644
--- a/drivers/staging/iio/dac/ad5624r_spi.c
+++ b/drivers/staging/iio/dac/ad5624r_spi.c
@@ -21,56 +21,6 @@
#include "ad5624r.h"
-#define AD5624R_CHANNEL(_chan, _bits) { \
- .type = IIO_VOLTAGE, \
- .indexed = 1, \
- .output = 1, \
- .channel = (_chan), \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
- IIO_CHAN_INFO_SCALE_SHARED_BIT, \
- .address = (_chan), \
- .scan_type = IIO_ST('u', (_bits), 16, 16 - (_bits)), \
-}
-
-#define DECLARE_AD5624R_CHANNELS(_name, _bits) \
- const struct iio_chan_spec _name##_channels[] = { \
- AD5624R_CHANNEL(0, _bits), \
- AD5624R_CHANNEL(1, _bits), \
- AD5624R_CHANNEL(2, _bits), \
- AD5624R_CHANNEL(3, _bits), \
-}
-
-static DECLARE_AD5624R_CHANNELS(ad5624r, 12);
-static DECLARE_AD5624R_CHANNELS(ad5644r, 14);
-static DECLARE_AD5624R_CHANNELS(ad5664r, 16);
-
-static const struct ad5624r_chip_info ad5624r_chip_info_tbl[] = {
- [ID_AD5624R3] = {
- .channels = ad5624r_channels,
- .int_vref_mv = 1250,
- },
- [ID_AD5624R5] = {
- .channels = ad5624r_channels,
- .int_vref_mv = 2500,
- },
- [ID_AD5644R3] = {
- .channels = ad5644r_channels,
- .int_vref_mv = 1250,
- },
- [ID_AD5644R5] = {
- .channels = ad5644r_channels,
- .int_vref_mv = 2500,
- },
- [ID_AD5664R3] = {
- .channels = ad5664r_channels,
- .int_vref_mv = 1250,
- },
- [ID_AD5664R5] = {
- .channels = ad5664r_channels,
- .int_vref_mv = 2500,
- },
-};
-
static int ad5624r_spi_write(struct spi_device *spi,
u8 cmd, u8 addr, u16 val, u8 len)
{
@@ -138,67 +88,62 @@ static int ad5624r_write_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
-static ssize_t ad5624r_read_powerdown_mode(struct device *dev,
- struct device_attribute *attr, char *buf)
+static const char * const ad5624r_powerdown_modes[] = {
+ "1kohm_to_gnd",
+ "100kohm_to_gnd",
+ "three_state"
+};
+
+static int ad5624r_get_powerdown_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ad5624r_state *st = iio_priv(indio_dev);
- char mode[][15] = {"", "1kohm_to_gnd", "100kohm_to_gnd", "three_state"};
-
- return sprintf(buf, "%s\n", mode[st->pwr_down_mode]);
+ return st->pwr_down_mode;
}
-static ssize_t ad5624r_write_powerdown_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
+static int ad5624r_set_powerdown_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, unsigned int mode)
{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ad5624r_state *st = iio_priv(indio_dev);
- int ret;
- if (sysfs_streq(buf, "1kohm_to_gnd"))
- st->pwr_down_mode = AD5624R_LDAC_PWRDN_1K;
- else if (sysfs_streq(buf, "100kohm_to_gnd"))
- st->pwr_down_mode = AD5624R_LDAC_PWRDN_100K;
- else if (sysfs_streq(buf, "three_state"))
- st->pwr_down_mode = AD5624R_LDAC_PWRDN_3STATE;
- else
- ret = -EINVAL;
+ st->pwr_down_mode = mode;
- return ret ? ret : len;
+ return 0;
}
-static ssize_t ad5624r_read_dac_powerdown(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static const struct iio_enum ad5624r_powerdown_mode_enum = {
+ .items = ad5624r_powerdown_modes,
+ .num_items = ARRAY_SIZE(ad5624r_powerdown_modes),
+ .get = ad5624r_get_powerdown_mode,
+ .set = ad5624r_set_powerdown_mode,
+};
+
+static ssize_t ad5624r_read_dac_powerdown(struct iio_dev *indio_dev,
+ uintptr_t private, const struct iio_chan_spec *chan, char *buf)
{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ad5624r_state *st = iio_priv(indio_dev);
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
return sprintf(buf, "%d\n",
- !!(st->pwr_down_mask & (1 << this_attr->address)));
+ !!(st->pwr_down_mask & (1 << chan->channel)));
}
-static ssize_t ad5624r_write_dac_powerdown(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
+static ssize_t ad5624r_write_dac_powerdown(struct iio_dev *indio_dev,
+ uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
+ size_t len)
{
long readin;
int ret;
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ad5624r_state *st = iio_priv(indio_dev);
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
ret = strict_strtol(buf, 10, &readin);
if (ret)
return ret;
if (readin == 1)
- st->pwr_down_mask |= (1 << this_attr->address);
+ st->pwr_down_mask |= (1 << chan->channel);
else if (!readin)
- st->pwr_down_mask &= ~(1 << this_attr->address);
+ st->pwr_down_mask &= ~(1 << chan->channel);
else
ret = -EINVAL;
@@ -209,47 +154,75 @@ static ssize_t ad5624r_write_dac_powerdown(struct device *dev,
return ret ? ret : len;
}
-static IIO_DEVICE_ATTR(out_voltage_powerdown_mode, S_IRUGO |
- S_IWUSR, ad5624r_read_powerdown_mode,
- ad5624r_write_powerdown_mode, 0);
-
-static IIO_CONST_ATTR(out_voltage_powerdown_mode_available,
- "1kohm_to_gnd 100kohm_to_gnd three_state");
-
-#define IIO_DEV_ATTR_DAC_POWERDOWN(_num, _show, _store, _addr) \
- IIO_DEVICE_ATTR(out_voltage##_num##_powerdown, \
- S_IRUGO | S_IWUSR, _show, _store, _addr)
-
-static IIO_DEV_ATTR_DAC_POWERDOWN(0, ad5624r_read_dac_powerdown,
- ad5624r_write_dac_powerdown, 0);
-static IIO_DEV_ATTR_DAC_POWERDOWN(1, ad5624r_read_dac_powerdown,
- ad5624r_write_dac_powerdown, 1);
-static IIO_DEV_ATTR_DAC_POWERDOWN(2, ad5624r_read_dac_powerdown,
- ad5624r_write_dac_powerdown, 2);
-static IIO_DEV_ATTR_DAC_POWERDOWN(3, ad5624r_read_dac_powerdown,
- ad5624r_write_dac_powerdown, 3);
-
-static struct attribute *ad5624r_attributes[] = {
- &iio_dev_attr_out_voltage0_powerdown.dev_attr.attr,
- &iio_dev_attr_out_voltage1_powerdown.dev_attr.attr,
- &iio_dev_attr_out_voltage2_powerdown.dev_attr.attr,
- &iio_dev_attr_out_voltage3_powerdown.dev_attr.attr,
- &iio_dev_attr_out_voltage_powerdown_mode.dev_attr.attr,
- &iio_const_attr_out_voltage_powerdown_mode_available.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group ad5624r_attribute_group = {
- .attrs = ad5624r_attributes,
-};
-
static const struct iio_info ad5624r_info = {
.write_raw = ad5624r_write_raw,
.read_raw = ad5624r_read_raw,
- .attrs = &ad5624r_attribute_group,
.driver_module = THIS_MODULE,
};
+static const struct iio_chan_spec_ext_info ad5624r_ext_info[] = {
+ {
+ .name = "powerdown",
+ .read = ad5624r_read_dac_powerdown,
+ .write = ad5624r_write_dac_powerdown,
+ },
+ IIO_ENUM("powerdown_mode", true, &ad5624r_powerdown_mode_enum),
+ IIO_ENUM_AVAILABLE("powerdown_mode", &ad5624r_powerdown_mode_enum),
+ { },
+};
+
+#define AD5624R_CHANNEL(_chan, _bits) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .output = 1, \
+ .channel = (_chan), \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT, \
+ .address = (_chan), \
+ .scan_type = IIO_ST('u', (_bits), 16, 16 - (_bits)), \
+ .ext_info = ad5624r_ext_info, \
+}
+
+#define DECLARE_AD5624R_CHANNELS(_name, _bits) \
+ const struct iio_chan_spec _name##_channels[] = { \
+ AD5624R_CHANNEL(0, _bits), \
+ AD5624R_CHANNEL(1, _bits), \
+ AD5624R_CHANNEL(2, _bits), \
+ AD5624R_CHANNEL(3, _bits), \
+}
+
+static DECLARE_AD5624R_CHANNELS(ad5624r, 12);
+static DECLARE_AD5624R_CHANNELS(ad5644r, 14);
+static DECLARE_AD5624R_CHANNELS(ad5664r, 16);
+
+static const struct ad5624r_chip_info ad5624r_chip_info_tbl[] = {
+ [ID_AD5624R3] = {
+ .channels = ad5624r_channels,
+ .int_vref_mv = 1250,
+ },
+ [ID_AD5624R5] = {
+ .channels = ad5624r_channels,
+ .int_vref_mv = 2500,
+ },
+ [ID_AD5644R3] = {
+ .channels = ad5644r_channels,
+ .int_vref_mv = 1250,
+ },
+ [ID_AD5644R5] = {
+ .channels = ad5644r_channels,
+ .int_vref_mv = 2500,
+ },
+ [ID_AD5664R3] = {
+ .channels = ad5664r_channels,
+ .int_vref_mv = 1250,
+ },
+ [ID_AD5664R5] = {
+ .channels = ad5664r_channels,
+ .int_vref_mv = 2500,
+ },
+};
+
+
static int __devinit ad5624r_probe(struct spi_device *spi)
{
struct ad5624r_state *st;
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
