This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9M10G45-EK board.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
---
arch/arm/mach-at91/at91sam9g45.c | 9 +++
arch/arm/mach-at91/at91sam9g45_devices.c | 101 ++++++++++++++++++++++++++++++
arch/arm/mach-at91/board-sam9m10g45ek.c | 12 ++++
3 files changed, 122 insertions(+)
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index d222f83..30865c6 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -176,6 +176,12 @@ static struct clk vdec_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk adc_op_clk = {
+ .name = "adc_op_clk",
+ .type = CLK_TYPE_PERIPHERAL,
+ .rate_hz = 13200000,
+};
+
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
@@ -204,6 +210,7 @@ static struct clk *periph_clocks[] __initdata = {
&isi_clk,
&udphs_clk,
&mmc1_clk,
+ &adc_op_clk,
// irq0
};
@@ -242,6 +249,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioDE_clk),
CLKDEV_CON_ID("pioE", &pioDE_clk),
+ /* Fake adc clock */
+ CLKDEV_CON_ID("adc_clk", &tsc_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 6b008ae..0c6d9fe 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -19,9 +19,12 @@
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
+#include <linux/platform_data/at91_adc.h>
+
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
+#include <mach/at91_adc.h>
#include <mach/board.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
@@ -1207,6 +1210,104 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
/* --------------------------------------------------------------------
+ * ADC
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TSC,
+ .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TSC,
+ .end = AT91SAM9G45_ID_TSC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device at91_adc_device = {
+ .name = "at91_adc",
+ .id = -1,
+ .dev = {
+ .platform_data = &adc_data,
+ },
+ .resource = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+ [0] = {
+ .name = "external-rising",
+ .value = 1,
+ .is_external = true,
+ },
+ [1] = {
+ .name = "external-falling",
+ .value = 2,
+ .is_external = true,
+ },
+ [2] = {
+ .name = "external-any",
+ .value = 3,
+ .is_external = true,
+ },
+ [3] = {
+ .name = "continuous",
+ .value = 6,
+ .is_external = false,
+ },
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g45 = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = 0x08,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+ if (!data)
+ return;
+
+ if (test_bit(0, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD20, 0);
+ if (test_bit(1, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD21, 0);
+ if (test_bit(2, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD22, 0);
+ if (test_bit(3, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD23, 0);
+ if (test_bit(4, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD24, 0);
+ if (test_bit(5, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD25, 0);
+ if (test_bit(6, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD26, 0);
+ if (test_bit(7, &data->channels_used))
+ at91_set_gpio_input(AT91_PIN_PD27, 0);
+
+ if (data->use_external_triggers)
+ at91_set_A_periph(AT91_PIN_PD28, 0);
+
+ data->num_channels = 8;
+ data->startup_time = 40;
+ data->registers = &at91_adc_register_g45;
+ data->trigger_number = 4;
+ data->trigger_list = at91_adc_triggers;
+
+ adc_data = *data;
+ platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index c88e908..337abd2 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -27,6 +27,8 @@
#include <linux/atmel-mci.h>
#include <linux/delay.h>
+#include <linux/platform_data/at91_adc.h>
+
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
#include <media/soc_camera.h>
@@ -315,6 +317,14 @@ static struct at91_tsadcc_data ek_tsadcc_data = {
.ts_sample_hold_time = 0x0a,
};
+/*
+ * ADCs
+ */
+static struct at91_adc_data ek_adc_data = {
+ .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
+ .use_external_triggers = true,
+ .vref = 3300,
+};
/*
* GPIO Buttons
@@ -480,6 +490,8 @@ static void __init ek_board_init(void)
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
at91_add_device_tsadcc(&ek_tsadcc_data);
+ /* ADC */
+ at91_add_device_adc(&ek_adc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
