Just a couple of things I came across whilst reviewing this file for moving out of staging. I doubt anyone cares, but seemed sensible to fix them now! Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxxx> --- drivers/staging/iio/Documentation/sysfs-bus-iio | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio index acf8698..ab7dfeb 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio @@ -108,7 +108,7 @@ Description: physically equivalent inputs when non differential readings are separately available. In differential only parts, then all that is required is a consistent labeling. Units after application - of scale and offset are nanofarads.. + of scale and offset are nanofarads. What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw @@ -119,7 +119,7 @@ KernelVersion: 2.6.35 Contact: linux-iio@xxxxxxxxxxxxxxx Description: Raw (unscaled no bias removal etc) temperature measurement. - It an axis is specified it generally means that the temperature + If an axis is specified it generally means that the temperature sensor is associated with one part of a compound device (e.g. a gyroscope axis). Units after application of scale and offset are milli degrees Celsuis. @@ -232,7 +232,7 @@ Description: If known for a device, scale to be applied to <type>Y[_name]_raw post addition of <type>[Y][_name]_offset in order to obtain the measured value in <type> units as specified in - <type>[Y][_name]_raw documentation.. If shared across all in + <type>[Y][_name]_raw documentation. If shared across all in channels then Y and <x|y|z> are not present and the value is called <type>[Y][_name]_scale. The peak modifier means this value is applied to <type>Y[_name]_peak_raw values. -- 1.7.9.4 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
