Re: [PATCH 05/12] iio: ad7291: don't swab results twice and introduce more register defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/31/11 11:57, michael.hennerich@xxxxxxxxxx wrote:
> From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> 
oops. my bad on the double swab I think.
Anyhow all looks sane an good.  That fixme with the reverse register order
is odd.  Guessing you are chasing that down with the hardware guys?
> 
> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
merged
> ---
>  drivers/staging/iio/adc/ad7291.c |   90 ++++++++++++++++++++++++-------------
>  1 files changed, 58 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c
> index 382ca3e..2fafca7 100644
> --- a/drivers/staging/iio/adc/ad7291.c
> +++ b/drivers/staging/iio/adc/ad7291.c
> @@ -33,18 +33,43 @@
>  /*
>   * AD7291 registers definition
>   */
> -#define AD7291_COMMAND			0
> -#define AD7291_VOLTAGE			1
> -#define AD7291_T_SENSE			2
> -#define AD7291_T_AVERAGE		3
> -#define AD7291_VOLTAGE_LIMIT_BASE	4
> -#define AD7291_VOLTAGE_LIMIT_COUNT	8
> +#define AD7291_COMMAND			0x00
> +#define AD7291_VOLTAGE			0x01
> +#define AD7291_T_SENSE			0x02
> +#define AD7291_T_AVERAGE		0x03
> +#define AD7291_CH0_DATA_HIGH		0x04
> +#define AD7291_CH0_DATA_LOW		0x05
> +#define AD7291_CH0_HYST			0x06
> +#define AD7291_CH1_DATA_HIGH		0x07
> +#define AD7291_CH1_DATA_LOW		0x08
> +#define AD7291_CH1_HYST			0x09
> +#define AD7291_CH2_DATA_HIGH		0x0A
> +#define AD7291_CH2_DATA_LOW		0x0B
> +#define AD7291_CH2_HYST			0x0C
> +#define AD7291_CH3_DATA_HIGH		0x0D
> +#define AD7291_CH3_DATA_LOW		0x0E
> +#define AD7291_CH3_HYST			0x0F
> +#define AD7291_CH4_DATA_HIGH		0x10
> +#define AD7291_CH4_DATA_LOW		0x11
> +#define AD7291_CH4_HYST			0x12
> +#define AD7291_CH5_DATA_HIGH		0x13
> +#define AD7291_CH5_DATA_LOW		0x14
> +#define AD7291_CH5_HYST			0x15
> +#define AD7291_CH6_DATA_HIGH		0x16
> +#define AD7291_CH6_DATA_LOW		0x17
> +#define AD7291_CH6_HYST			0x18
> +#define AD7291_CH7_DATA_HIGH		0x19
> +#define AD7291_CH7_DATA_LOW		0x1A
> +#define AD7291_CH7_HYST			0x2B
>  #define AD7291_T_SENSE_HIGH		0x1C
>  #define AD7291_T_SENSE_LOW		0x1D
>  #define AD7291_T_SENSE_HYST		0x1E
>  #define AD7291_VOLTAGE_ALERT_STATUS	0x1F
>  #define AD7291_T_ALERT_STATUS		0x20
>  
> +#define AD7291_VOLTAGE_LIMIT_COUNT	8
> +
> +
>  /*
>   * AD7291 command
>   */
> @@ -197,7 +222,7 @@ static inline ssize_t ad7291_show_hyst(struct device *dev,
>  	if (ret < 0)
>  		return ret;
>  
> -	return sprintf(buf, "%d\n", data & 0x0FFF);
> +	return sprintf(buf, "%d\n", data & AD7291_VALUE_MASK);
>  }
>  
>  static inline ssize_t ad7291_set_hyst(struct device *dev,
> @@ -227,28 +252,28 @@ static IIO_DEVICE_ATTR(in_temp0_thresh_both_hyst_raw,
>  		       AD7291_T_SENSE_HYST);
>  static IIO_DEVICE_ATTR(in_voltage0_thresh_both_hyst_raw,
>  		       S_IRUGO | S_IWUSR,
> -		       ad7291_show_hyst, ad7291_set_hyst, 0x06);
> +		       ad7291_show_hyst, ad7291_set_hyst, AD7291_CH0_HYST);
>  static IIO_DEVICE_ATTR(in_voltage1_thresh_both_hyst_raw,
>  		       S_IRUGO | S_IWUSR,
> -		       ad7291_show_hyst, ad7291_set_hyst, 0x09);
> +		       ad7291_show_hyst, ad7291_set_hyst, AD7291_CH1_HYST);
>  static IIO_DEVICE_ATTR(in_voltage2_thresh_both_hyst_raw,
>  		       S_IRUGO | S_IWUSR,
> -		       ad7291_show_hyst, ad7291_set_hyst, 0x0C);
> +		       ad7291_show_hyst, ad7291_set_hyst, AD7291_CH2_HYST);
>  static IIO_DEVICE_ATTR(in_voltage3_thresh_both_hyst_raw,
>  		       S_IRUGO | S_IWUSR,
> -		       ad7291_show_hyst, ad7291_set_hyst, 0x0F);
> +		       ad7291_show_hyst, ad7291_set_hyst, AD7291_CH3_HYST);
>  static IIO_DEVICE_ATTR(in_voltage4_thresh_both_hyst_raw,
>  		       S_IRUGO | S_IWUSR,
> -		       ad7291_show_hyst, ad7291_set_hyst, 0x12);
> +		       ad7291_show_hyst, ad7291_set_hyst, AD7291_CH4_HYST);
>  static IIO_DEVICE_ATTR(in_voltage5_thresh_both_hyst_raw,
>  		       S_IRUGO | S_IWUSR,
> -		       ad7291_show_hyst, ad7291_set_hyst, 0x15);
> +		       ad7291_show_hyst, ad7291_set_hyst, AD7291_CH5_HYST);
>  static IIO_DEVICE_ATTR(in_voltage6_thresh_both_hyst_raw,
>  		       S_IRUGO | S_IWUSR,
> -		       ad7291_show_hyst, ad7291_set_hyst, 0x18);
> +		       ad7291_show_hyst, ad7291_set_hyst, AD7291_CH6_HYST);
>  static IIO_DEVICE_ATTR(in_voltage7_thresh_both_hyst_raw,
>  		       S_IRUGO | S_IWUSR,
> -		       ad7291_show_hyst, ad7291_set_hyst, 0x1B);
> +		       ad7291_show_hyst, ad7291_set_hyst, AD7291_CH7_HYST);
>  
>  static struct attribute *ad7291_event_attributes[] = {
>  	&iio_dev_attr_in_temp0_thresh_both_hyst_raw.dev_attr.attr,
> @@ -265,16 +290,16 @@ static struct attribute *ad7291_event_attributes[] = {
>  
>  /* high / low */
>  static u8 ad7291_limit_regs[9][2] = {
> -	{ 0x04, 0x05 },
> -	{ 0x07, 0x08 },
> -	{ 0x0A, 0x0B },
> -	{ 0x0E, 0x0D }, /* note reversed order */
> -	{ 0x10, 0x11 },
> -	{ 0x13, 0x14 },
> -	{ 0x16, 0x17 },
> -	{ 0x19, 0x1A },
> +	{ AD7291_CH0_DATA_HIGH, AD7291_CH0_DATA_LOW },
> +	{ AD7291_CH1_DATA_HIGH, AD7291_CH1_DATA_LOW },
> +	{ AD7291_CH2_DATA_HIGH, AD7291_CH2_DATA_LOW },
> +	{ AD7291_CH3_DATA_HIGH, AD7291_CH3_DATA_LOW }, /* FIXME: ? */
> +	{ AD7291_CH4_DATA_HIGH, AD7291_CH4_DATA_LOW },
> +	{ AD7291_CH5_DATA_HIGH, AD7291_CH5_DATA_LOW },
> +	{ AD7291_CH6_DATA_HIGH, AD7291_CH6_DATA_LOW },
> +	{ AD7291_CH7_DATA_HIGH, AD7291_CH7_DATA_LOW },
>  	/* temp */
> -	{ 0x1C, 0x1D },
> +	{ AD7291_T_SENSE_HIGH, AD7291_T_SENSE_LOW },
>  };
>  
>  static int ad7291_read_event_value(struct iio_dev *indio_dev,
> @@ -297,7 +322,7 @@ static int ad7291_read_event_value(struct iio_dev *indio_dev,
>  		ret = ad7291_i2c_read(chip, reg, &uval);
>  		if (ret < 0)
>  			return ret;
> -		*val = swab16(uval) & 0x0FFF;
> +		*val = uval & AD7291_VALUE_MASK;
>  		return 0;
>  
>  	case IIO_TEMP:
> @@ -308,7 +333,7 @@ static int ad7291_read_event_value(struct iio_dev *indio_dev,
>  		ret = ad7291_i2c_read(chip, reg, &signval);
>  		if (ret < 0)
>  			return ret;
> -		signval = (s16)((swab16(signval) & 0x0FFF) << 4) >> 4;
> +		signval = (s16)((signval & AD7291_VALUE_MASK) << 4) >> 4;
>  		*val = signval;
>  		return 0;
>  	default:
> @@ -331,9 +356,7 @@ static int ad7291_write_event_value(struct iio_dev *indio_dev,
>  		reg = ad7291_limit_regs[IIO_EVENT_CODE_EXTRACT_NUM(event_code)]
>  			[!(IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
>  			   IIO_EV_DIR_RISING)];
> -
>  		return ad7291_i2c_write(chip, reg, val);
> -
>  	case IIO_TEMP:
>  		if (val > 2047 || val < -2048)
>  			return -EINVAL;
> @@ -385,6 +408,7 @@ static int ad7291_write_event_config(struct iio_dev *indio_dev,
>  	 * use continuous sampling mode.
>  	 * Possible to disable temp as well but that makes single read tricky.
>  	 */
> +
>  	switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
>  	case IIO_VOLTAGE:
>  		if ((!state) && (chip->c_mask &
> @@ -398,7 +422,7 @@ static int ad7291_write_event_config(struct iio_dev *indio_dev,
>  		else
>  			break;
>  
> -		regval &= 0xFFFE;
> +		regval &= ~AD7291_AUTOCYCLE;
>  		regval |= ((u16)chip->c_mask << 8);
>  		if (chip->c_mask) /* Enable autocycle? */
>  			regval |= AD7291_AUTOCYCLE;
> @@ -455,7 +479,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
>  				mutex_unlock(&chip->state_lock);
>  				return ret;
>  			}
> -			*val = swab16((u16)ret) & 0x0FFF;
> +			*val = swab16((u16)ret) & AD7291_VALUE_MASK;
>  			mutex_unlock(&chip->state_lock);
>  			return IIO_VAL_INT;
>  		case IIO_TEMP:
> @@ -464,7 +488,8 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
>  						       AD7291_T_SENSE);
>  			if (ret < 0)
>  				return ret;
> -			signval = (s16)((swab16((u16)ret) & 0x0FFF) << 4) >> 4;
> +			signval = (s16)((swab16((u16)ret) &
> +				AD7291_VALUE_MASK) << 4) >> 4;
>  			*val = signval;
>  			return IIO_VAL_INT;
>  		default:
> @@ -475,7 +500,8 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
>  					       AD7291_T_AVERAGE);
>  			if (ret < 0)
>  				return ret;
> -			signval = (s16)((swab16((u16)ret) & 0x0FFF) << 4) >> 4;
> +			signval = (s16)((swab16((u16)ret) &
> +				AD7291_VALUE_MASK) << 4) >> 4;
>  			*val = signval;
>  			return IIO_VAL_INT;
>  	case (1 << IIO_CHAN_INFO_SCALE_SHARED):

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux