cc'd linux-iio On 06/10/11 21:26, Bryan Freed wrote: > This is the same tuning file used in tsl2583.c. > Add documentation for it to sysfs-bus-iio-light. > Normalize it at 1024 instead of 1000 so we can avoid 64bit division (div_u64). > Use u64 so we can do all multiplication before division to avoid loss of > granularity on amplified values. Hi Brian. This attribute is a general IIO one rather than a light specific one so is already documented in sysfs-bus-iio. Now it is supposed to be an offset rather than a gain. The current docs say: "Hardware applied calibration offset. (assumed to fix production inaccuracies). If shared across all channels, <type>_calibbias is used." I do note that the illuminance variant isn't actually listed and would be happy to have a patch adding it alongside the gyro and accel ones already there. My first issue here is that it supposed to be an offset not a gain. Secondly that description could clearly do with amending to make it clear that this can be used for devices with complex non linear transformations to SI units which is what it is supposed to be doing here. In cases where there is no '_raw' output we can assume something complex may be happening, so changing this value won't result in a additive change the output. If we are playing with a gain, then calibscale is the parameter name that should be used (also a core attribute definition, not a light specific one). "Hardware applied calibration scale factor. (assumed to fix production inaccuracies). If shared across all channels, <type>_calibscale is used." Note all these attributes are defined to be pseudo floating point. The chan_spec approach to registration handles this cleanly (particularly with Michael Hennerich's additional callbacks added last week). It's a gain, so 1 is the no change value. Sorry, but anything that assumes 1024 is the no effect value is never going to generalize well so is a non starter. Sorry, I'll be happy to see a patch adding the support you want to the isl29018 driver but it must conform to the existing abi. It looks like you may have found a discrepancy between a driver and the spec, but I'll leave Jon to comment on that. Jonathan > > Signed-off-by: Bryan Freed <bfreed@xxxxxxxxxxxx> > --- > .../staging/iio/Documentation/sysfs-bus-iio-light | 10 +++++ > drivers/staging/iio/light/isl29018.c | 36 +++++++++++++++++++- > 2 files changed, 45 insertions(+), 1 deletions(-) > > diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light > index 21d2774..704b6c9 100644 > --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light > +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light > @@ -75,3 +75,13 @@ KernelVersion: 2.6.37 > Contact: linux-iio@xxxxxxxxxxxxxxx > Description: > This property gets/sets the sensors ADC analog integration time. > + > +What: /sys/bus/iio/devices/device[n]/illuminance0_calibbias > +KernelVersion: 2.6.38 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + This property gets/sets the illuminance0_input amplification > + value. The calculated lux reading is multiplied by this value > + and divided by 1024. Default of 1024 gives no amplification. > + This provides compensation for glass or bezel that can > + attenuate the ambient light. > diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c > index 4794ffd..a106f16 100644 > --- a/drivers/staging/iio/light/isl29018.c > +++ b/drivers/staging/iio/light/isl29018.c > @@ -57,6 +57,7 @@ struct isl29018_chip { > struct iio_dev *indio_dev; > struct i2c_client *client; > struct mutex lock; > + unsigned int calibbias; > unsigned int range; > unsigned int adc_bit; > int prox_scheme; > @@ -157,6 +158,7 @@ static int isl29018_read_sensor_input(struct i2c_client *client, int mode) > > static int isl29018_read_lux(struct i2c_client *client, int *lux) > { > + u64 lux64; > int lux_data; > struct isl29018_chip *chip = i2c_get_clientdata(client); > > @@ -166,7 +168,8 @@ static int isl29018_read_lux(struct i2c_client *client, int *lux) > if (lux_data < 0) > return lux_data; > > - *lux = (lux_data * chip->range) >> chip->adc_bit; > + lux64 = lux_data * chip->range; > + *lux = (lux64 * chip->calibbias) >> (10 + chip->adc_bit); > > return 0; > } > @@ -264,6 +267,33 @@ static ssize_t get_sensor_data(struct device *dev, char *buf, int mode) > } > > /* Sysfs interface */ > +/* calibbias */ > +static ssize_t show_calibbias(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct iio_dev *indio_dev = dev_get_drvdata(dev); > + struct isl29018_chip *chip = indio_dev->dev_data; > + > + return sprintf(buf, "%u\n", chip->calibbias); > +} > + > +static ssize_t store_calibbias(struct device *dev, > + struct device_attribute *attr, const char *buf, size_t count) > +{ > + struct iio_dev *indio_dev = dev_get_drvdata(dev); > + struct isl29018_chip *chip = indio_dev->dev_data; > + unsigned long lval; > + > + if (strict_strtoul(buf, 10, &lval)) > + return -EINVAL; > + > + mutex_lock(&chip->lock); > + chip->calibbias = lval; > + mutex_unlock(&chip->lock); > + > + return count; > +} > + > /* range */ > static ssize_t show_range(struct device *dev, > struct device_attribute *attr, char *buf) > @@ -412,6 +442,8 @@ static IIO_DEVICE_ATTR(proximity_on_chip_ambient_infrared_supression, > show_prox_infrared_supression, > store_prox_infrared_supression, 0); > static IIO_DEVICE_ATTR(illuminance0_input, S_IRUGO, show_lux, NULL, 0); > +static IIO_DEVICE_ATTR(illuminance0_calibbias, S_IRUGO | S_IWUSR, > + show_calibbias, store_calibbias, 0); > static IIO_DEVICE_ATTR(intensity_infrared_raw, S_IRUGO, show_ir, NULL, 0); > static IIO_DEVICE_ATTR(proximity_raw, S_IRUGO, show_proxim_ir, NULL, 0); > > @@ -424,6 +456,7 @@ static struct attribute *isl29018_attributes[] = { > ISL29018_CONST_ATTR(adc_resolution_available), > ISL29018_DEV_ATTR(proximity_on_chip_ambient_infrared_supression), > ISL29018_DEV_ATTR(illuminance0_input), > + ISL29018_DEV_ATTR(illuminance0_calibbias), > ISL29018_DEV_ATTR(intensity_infrared_raw), > ISL29018_DEV_ATTR(proximity_raw), > NULL > @@ -478,6 +511,7 @@ static int __devinit isl29018_probe(struct i2c_client *client, > > mutex_init(&chip->lock); > > + chip->calibbias = 1024; > chip->range = 1000; > chip->adc_bit = 16; > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html