On Fri, Apr 29, 2011 at 06:21:52PM -0400, Vivien Didelot wrote: > From: Jonas Fonseca <jonas.fonseca@xxxxxxxxxxxxxxxxxxxx> > > > Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx> Hi Vivien, The headline and file name are a bit misleading, since the driver is really for MAX197 on a TS-5500 board. You should split the driver into two parts, a generic driver for the MAX197 and a platform driver (residing somewhere in arch/ or possibly drivers/platform/) to instantiate it. There should be a platform data include file, probably in include/linux/platform_data/. .ioaddr in platform data should not be necessary. The driver's probe function should get the values using platform_get_resource(). Having said that, from reading the code it looks like the chip is not really used for hardware monitoring, but for generic ADC functionality. A quick look into the TS-5500 user manual confirms this. So this should not be a hwmon driver in the first place, but a generic ADC driver. Given the ADC conversion rate of the MAX197, the hwmon ABI is not optimal anyway. You should move this driver into the iio subsystem, probably to drivers/staging/iio/adc. Copying the iio mailing list for input. Thanks, Guenter > --- > MAINTAINERS | 1 + > drivers/hwmon/Kconfig | 10 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/ts5500-adc.c | 481 ++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 493 insertions(+), 0 deletions(-) > create mode 100644 drivers/hwmon/ts5500-adc.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index c0a646d..aace74a 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6062,6 +6062,7 @@ F: drivers/gpio/ts5500-gpio.c > F: include/linux/ts5500-gpio.h > F: drivers/tty/serial/ts5500-auto485.c > F: drivers/leds/leds-ts5500.c > +F: drivers/hwmon/ts5500-adc.c > > TEGRA SUPPORT > M: Colin Cross <ccross@xxxxxxxxxxx> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 060ef63..5070530 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1286,6 +1286,16 @@ config SENSORS_MC13783_ADC > help > Support for the A/D converter on MC13783 PMIC. > > +config SENSORS_TS5500_ADC > + tristate "Technologic Systems TS-5500 ADC" > + depends on TS5500_SBC > + help > + Support for the A/D converter on Technologic Systems TS-5500 > + SBCs. > + > + This driver can also be built as a module. If so, the module > + will be called ts5500-adc. > + > if ACPI > > comment "ACPI drivers" > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 967d0ea..9c8563d 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -114,6 +114,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o > obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o > obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o > obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o > +obj-$(CONFIG_SENSORS_TS5500_ADC)+= ts5500-adc.o > > # PMBus drivers > obj-$(CONFIG_PMBUS) += pmbus_core.o > diff --git a/drivers/hwmon/ts5500-adc.c b/drivers/hwmon/ts5500-adc.c > new file mode 100644 > index 0000000..6568e9e > --- /dev/null > +++ b/drivers/hwmon/ts5500-adc.c > @@ -0,0 +1,481 @@ > +/* > + * Technologic Systems TS-5500 boards - MAX197 ADC driver > + * > + * Copyright (c) 2010 Savoir-faire Linux Inc. > + * Jonas Fonseca <jonas.fonseca@xxxxxxxxxxxxxxxxxxxx> > + * > + * Portions Copyright (C) 2008 Marc Pignat <marc.pignat@xxxxxxx> > + * > + * The driver uses direct access for communication with the ADC. > + * Should work unchanged with the MAX199 chip. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + */ > + > +#include <linux/init.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/device.h> > +#include <linux/delay.h> > +#include <linux/platform_device.h> > +#include <linux/err.h> > +#include <linux/sysfs.h> > +#include <linux/hwmon.h> > +#include <linux/hwmon-sysfs.h> > +#include <linux/mutex.h> > +#include <linux/ts5xxx-sbcinfo.h> > +#include <linux/slab.h> > +#include <linux/io.h> > + > +#define MODULE_NAME "ts5500-max197" > + > +/* > + * Control bits of A/D command > + * bits 0-2: selected channel (0 - 7) > + * bits 3: uni/bipolar (0 = unipolar (ie 0 to +5V)) > + * (1 = bipolar (ie -5 to +5V)) > + * bit 4: selected range (0 = 5v range, 1 = 10V range) > + * bit 5-7: padded zero (unused) > + */ > +#define TS5500_MAX197_BIPOLAR 0x08 > +#define TS5500_MAX197_UNIPOLAR 0x00 > +#define TS5500_MAX197_RANGE_5V 0x00 /* 0 to 5V range */ > +#define TS5500_MAX197_RANGE_10V 0x10 /* 0 to 10V range */ > + > +#define TS5500_MAX197_READ_DELAY 15 /* usec */ > +#define TS5500_MAX197_READ_BUSY_MASK 0x01 > +#define TS5500_MAX197_NAME "MAX197 (8 channels)" > + > +#define MAX197_CHANNELS_MAX 8 /* 0 to 7 channels on device */ > + > +#define max197_test_bit(bit, map) (test_bit(bit, map) != 0) > + > +/** > + * struct max197_platform_data > + * @name: Name of the device. > + * @ioaddr: I/O address containing: > + * .data: Data register for conversion reading. > + * .ctrl: A/D Control Register (bit 0 = 0 when > + * conversion completed). > + * @read: Information about conversion reading, with: > + * .delay: Delay before next conversion. > + * .busy_mask: Control register bit 0 equals 1 means > + * conversion is not completed yet. > + * @ctrl: Data tables addressable by [polarity][range]. > + * @ranges: Ranges. > + * .min: Min value. > + * .max: Max value. > + * @scale: Polarity/Range coefficients to scale raw conversion reading. > + */ > +struct max197_platform_data { > + const char *name; > + struct { > + int data; > + int ctrl; > + } ioaddr; > + struct { > + u8 delay; > + u8 busy_mask; > + } read; > + u8 ctrl[2][2]; > + struct { > + int min[2][2]; > + int max[2][2]; > + } ranges; > + int scale[2][2]; > +}; > + > +/** > + * struct max197_chip > + * @hwmon_dev: The hwmon device. > + * @lock: Read/Write mutex. > + * @spec: The MAX197 platform data. > + * @polarity: bitmap for polarity. > + * @range: bitmap for range. > + */ > +struct max197_chip { > + struct device *hwmon_dev; > + struct mutex lock; > + struct max197_platform_data spec; > + DECLARE_BITMAP(polarity, MAX197_CHANNELS_MAX); > + DECLARE_BITMAP(range, MAX197_CHANNELS_MAX); > +}; > + > +static inline s32 max197_scale(struct max197_chip *chip, s16 raw, > + int polarity, int range) > +{ > + s32 scaled = raw; > + > + scaled *= chip->spec.scale[polarity][range]; > + scaled /= 10000; > + > + return scaled; > +} > + > +static inline int max197_range(struct max197_chip *chip, int is_min, > + int polarity, int range) > +{ > + if (is_min) > + return chip->spec.ranges.min[polarity][range]; > + return chip->spec.ranges.max[polarity][range]; > +} > + > +static inline int max197_strtol(const char *buf, long *value, int range1, > + int range2) > +{ > + if (strict_strtol(buf, 10, value)) > + return -EINVAL; > + > + if (range1 < range2) > + *value = SENSORS_LIMIT(*value, range1, range2); > + else > + *value = SENSORS_LIMIT(*value, range2, range1); > + > + return 0; > +} > + > +static inline struct max197_chip *max197_get_drvdata(struct device *dev) > +{ > + return platform_get_drvdata(to_platform_device(dev)); > +} > + > +/** > + * max197_show_range() - Display range on user output > + * > + * Function called on read access on > + * /sys/devices/platform/ts5500-max197/in{0,1,2,3,4,5,6,7}_{min,max} > + */ > +static ssize_t max197_show_range(struct device *dev, > + struct device_attribute *devattr, char *buf) > +{ > + struct max197_chip *chip = max197_get_drvdata(dev); > + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); > + int is_min = attr->nr != 0; > + int polarity, range; > + > + if (mutex_lock_interruptible(&chip->lock)) > + return -ERESTARTSYS; > + > + polarity = max197_test_bit(attr->index, chip->polarity); > + range = max197_test_bit(attr->index, chip->range); > + > + mutex_unlock(&chip->lock); > + > + return sprintf(buf, "%d\n", > + max197_range(chip, is_min, polarity, range)); > +} > + > +/** > + * max197_store_range() - Write range from user input > + * > + * Function called on write access on > + * /sys/devices/platform/ts5500-max197/in{0,1,2,3,4,5,6,7}_{min,max} > + */ > +static ssize_t max197_store_range(struct device *dev, > + struct device_attribute *devattr, > + const char *buf, size_t count) > +{ > + struct max197_chip *chip = max197_get_drvdata(dev); > + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); > + int is_min = attr->nr != 0; > + int range1 = max197_range(chip, is_min, 0, 0); > + int range2 = max197_range(chip, is_min, 1, 1); > + long value; > + > + if (max197_strtol(buf, &value, range1, range2)) > + return -EINVAL; > + > + if (mutex_lock_interruptible(&chip->lock)) > + return -ERESTARTSYS; > + > + if (abs(value) > 5000) > + set_bit(attr->index, chip->range); > + else > + clear_bit(attr->index, chip->range); > + > + if (is_min) { > + if (value < 0) > + set_bit(attr->index, chip->polarity); > + else > + clear_bit(attr->index, chip->polarity); > + } > + > + mutex_unlock(&chip->lock); > + > + return count; > +} > + > +/** > + * max197_show_input() - Show channel input > + * > + * Function called on read access on > + * /sys/devices/platform/ts5500-max197/in{0,1,2,3,4,5,6,7}_input > + */ > +static ssize_t max197_show_input(struct device *dev, > + struct device_attribute *devattr, char *buf) > +{ > + struct max197_chip *chip = max197_get_drvdata(dev); > + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > + int polarity, range; > + int ret; > + u8 command; > + > + if (mutex_lock_interruptible(&chip->lock)) > + return -ERESTARTSYS; > + > + polarity = max197_test_bit(attr->index, chip->polarity); > + range = max197_test_bit(attr->index, chip->range); > + > + command = attr->index | chip->spec.ctrl[polarity][range]; > + > + outb(command, chip->spec.ioaddr.data); > + > + udelay(chip->spec.read.delay); > + ret = inb(chip->spec.ioaddr.ctrl); > + > + if (ret & chip->spec.read.busy_mask) { > + dev_err(dev, "device not ready (ret=0x0%x, try=%d)\n", ret, > + range); > + ret = -EIO; > + } else { > + /* LSB of conversion is at 0x196 and MSB is at 0x197 */ > + u8 lsb = inb(chip->spec.ioaddr.data); > + u8 msb = inb(chip->spec.ioaddr.data + 1); > + s16 raw = (msb << 8) | lsb; > + s32 scaled = max197_scale(chip, raw, polarity, range); > + > + ret = sprintf(buf, "%d\n", scaled); > + } > + > + mutex_unlock(&chip->lock); > + return ret; > +} > + > +static ssize_t max197_show_name(struct device *dev, > + struct device_attribute *devattr, char *buf) > +{ > + return sprintf(buf, "%s\n", max197_get_drvdata(dev)->spec.name); > +} > + > +#define MAX197_HWMON_CHANNEL(chan) \ > + SENSOR_DEVICE_ATTR(in##chan##_input, S_IRUGO, \ > + max197_show_input, NULL, chan); \ > + SENSOR_DEVICE_ATTR_2(in##chan##_max, S_IRUGO | S_IWUSR, \ > + max197_show_range, \ > + max197_store_range, 0, chan); \ > + SENSOR_DEVICE_ATTR_2(in##chan##_min, S_IRUGO | S_IWUSR, \ > + max197_show_range, \ > + max197_store_range, 1, chan) \ > + > +#define MAX197_SYSFS_CHANNEL(chan) \ > + &sensor_dev_attr_in##chan##_input.dev_attr.attr, \ > + &sensor_dev_attr_in##chan##_max.dev_attr.attr, \ > + &sensor_dev_attr_in##chan##_min.dev_attr.attr > + > +static DEVICE_ATTR(name, S_IRUGO, max197_show_name, NULL); > + > +static MAX197_HWMON_CHANNEL(0); > +static MAX197_HWMON_CHANNEL(1); > +static MAX197_HWMON_CHANNEL(2); > +static MAX197_HWMON_CHANNEL(3); > +static MAX197_HWMON_CHANNEL(4); > +static MAX197_HWMON_CHANNEL(5); > +static MAX197_HWMON_CHANNEL(6); > +static MAX197_HWMON_CHANNEL(7); > + > +static const struct attribute_group max197_sysfs_group = { > + .attrs = (struct attribute *[]) { > + &dev_attr_name.attr, > + MAX197_SYSFS_CHANNEL(0), > + MAX197_SYSFS_CHANNEL(1), > + MAX197_SYSFS_CHANNEL(2), > + MAX197_SYSFS_CHANNEL(3), > + MAX197_SYSFS_CHANNEL(4), > + MAX197_SYSFS_CHANNEL(5), > + MAX197_SYSFS_CHANNEL(6), > + MAX197_SYSFS_CHANNEL(7), > + NULL > + } > +}; > + > +static int __devinit max197_probe(struct platform_device *pdev) > +{ > + struct max197_platform_data *pdata = pdev->dev.platform_data; > + struct max197_chip *chip; > + int ret; > + > + if (pdata == NULL) > + return -ENODEV; > + > + chip = kzalloc(sizeof *chip, GFP_KERNEL); > + if (!chip) > + return -ENOMEM; > + > + chip->spec = *pdata; > + > + mutex_init(&chip->lock); > + mutex_lock(&chip->lock); > + > + ret = sysfs_create_group(&pdev->dev.kobj, &max197_sysfs_group); > + if (ret) { > + dev_err(&pdev->dev, "sysfs_create_group failed.\n"); > + goto error_unlock_and_free; > + } > + > + chip->hwmon_dev = hwmon_device_register(&pdev->dev); > + if (IS_ERR(chip->hwmon_dev)) { > + dev_err(&pdev->dev, "hwmon_device_register failed.\n"); > + ret = PTR_ERR(chip->hwmon_dev); > + goto error_unregister_device; > + } > + > + platform_set_drvdata(pdev, chip); > + mutex_unlock(&chip->lock); > + return 0; > + > +error_unregister_device: > + sysfs_remove_group(&pdev->dev.kobj, &max197_sysfs_group); > + > +error_unlock_and_free: > + mutex_unlock(&chip->lock); > + kfree(chip); > + return ret; > +} > + > +static int __devexit max197_remove(struct platform_device *pdev) > +{ > + struct max197_chip *chip = platform_get_drvdata(pdev); > + > + mutex_lock(&chip->lock); > + hwmon_device_unregister(chip->hwmon_dev); > + sysfs_remove_group(&pdev->dev.kobj, &max197_sysfs_group); > + platform_set_drvdata(pdev, NULL); > + mutex_unlock(&chip->lock); > + kfree(chip); > + > + return 0; > +} > + > +static struct platform_driver max197_driver = { > + .driver = { > + .name = MODULE_NAME, > + .owner = THIS_MODULE, > + }, > + .probe = max197_probe, > + .remove = __devexit_p(max197_remove), > +}; > + > +static void ts5500_max197_release(struct device *dev) > +{ > + /* noop */ > +} > + > +static struct resource ts5500_max197_resources[] = { > + { > + .name = MODULE_NAME "-data", > + .start = 0x196, > + .end = 0x197, > + .flags = IORESOURCE_IO, > + }, > + { > + .name = MODULE_NAME "-ctrl", > + .start = 0x195, > + .end = 0x195, > + .flags = IORESOURCE_IO, > + } > +}; > + > +static struct max197_platform_data ts5500_max197_platform_data = { > + .name = TS5500_MAX197_NAME, > + .ioaddr = { > + .data = 0x196, > + .ctrl = 0x195, > + }, > + .read = { > + .delay = TS5500_MAX197_READ_DELAY, > + .busy_mask = TS5500_MAX197_READ_BUSY_MASK, > + }, > + .ctrl = { > + { TS5500_MAX197_UNIPOLAR | TS5500_MAX197_RANGE_5V, > + TS5500_MAX197_UNIPOLAR | TS5500_MAX197_RANGE_10V }, > + { TS5500_MAX197_BIPOLAR | TS5500_MAX197_RANGE_5V, > + TS5500_MAX197_BIPOLAR | TS5500_MAX197_RANGE_10V }, > + }, > + .ranges = { > + .min = { > + { 0, 0 }, > + { -5000, -10000 }, > + }, > + .max = { > + { 5000, 10000 }, > + { 5000, 10000 }, > + }, > + }, > + .scale = { > + { 12207, 24414 }, > + { 24414, 48828 }, > + }, > +}; > + > +static struct platform_device ts5500_max197_device = { > + .name = MODULE_NAME, > + .id = -1, > + .resource = ts5500_max197_resources, > + .num_resources = ARRAY_SIZE(ts5500_max197_resources), > + .dev = { > + .platform_data = &ts5500_max197_platform_data, > + .release = ts5500_max197_release, > + }, > +}; > + > +static int __init ts5500_max197_init(void) > +{ > + struct ts5xxx_sbcinfo sbcinfo; > + int ret; > + > + ts5xxx_sbcinfo_set(&sbcinfo); > + if (5500 != sbcinfo.board_id && !sbcinfo.adc) { > + printk(MODULE_NAME ": Incompatible TS Board.\n"); > + return -ENODEV; > + } > + > + ret = platform_driver_register(&max197_driver); > + if (ret) > + goto error_out; > + > + ret = platform_device_register(&ts5500_max197_device); > + if (ret) > + goto error_device_register; > + > + return 0; > + > +error_device_register: > + platform_driver_unregister(&max197_driver); > +error_out: > + return ret; > +} > +module_init(ts5500_max197_init); > + > +static void __exit ts5500_max197_exit(void) > +{ > + platform_device_unregister(&ts5500_max197_device); > + platform_driver_unregister(&max197_driver); > +} > +module_exit(ts5500_max197_exit); > + > +MODULE_DESCRIPTION("TS5500 MAX197 ADC device driver"); > +MODULE_AUTHOR("Jonas Fonseca <jonas.fonseca@xxxxxxxxxxxxxxxxxxxx>"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("platform:ts5500-max197"); > -- > 1.7.1 > > > _______________________________________________ > lm-sensors mailing list > lm-sensors@xxxxxxxxxxxxxx > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html