Linux IIO (Industrial I/O) Development

• Date Index

• [PATCH v5] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
• [PATCH] iio: adc: palmas: Fix typo in threshold calculation comment, Kuldeep Pisda
• [PATCH] iio: adc: ad_sigma_delta: add tab to align irq_line, David Lechner
• [PATCH 0/2] iio: adc: ad7313: fix non-const info struct, David Lechner
  • [PATCH 1/2] iio: adc: ad7313: fix irq number stored in static info struct, David Lechner
  • [PATCH 2/2] iio: adc: ad7173: make struct ad_sigma_delta_info ad7173_sigma_delta_info const, David Lechner
• [PATCH v2] iio: hid-sensor-prox: Fix invalid read_raw for attention, Ricardo Ribalda
  • Re: [PATCH v2] iio: hid-sensor-prox: Fix invalid read_raw for attention, srinivas pandruvada
• [PATCH] iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep(), Fabio Estevam
• [no subject], Unknown
• [PATCH 0/2] Support for TI ADS7128 and ADS7138 ADCs, Tobias Sperling via B4 Relay
  • [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138, Tobias Sperling via B4 Relay
    • Re: [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138, Jonathan Cameron
  • [PATCH 2/2] iio: adc: Add driver for ADS7128 / ADS7138, Tobias Sperling via B4 Relay
  • Re: [PATCH 0/2] Support for TI ADS7128 and ADS7138 ADCs, Krzysztof Kozlowski
• [PATCH v3 00/10] iio: adc: ad7124: Various fixes, Uwe Kleine-König
  • [PATCH v3 03/10] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line, Uwe Kleine-König
  • [PATCH v3 02/10] iio: adc: ad7124: Refuse invalid input specifiers, Uwe Kleine-König
  • [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle, Uwe Kleine-König
    • Re: [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle, David Lechner
      • Re: [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle, Uwe Kleine-König
        • Re: [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle, David Lechner
  • [PATCH v3 04/10] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO, Uwe Kleine-König
    • Re: [PATCH v3 04/10] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO, Andy Shevchenko
  • [PATCH v3 05/10] iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw(), Uwe Kleine-König
    • Re: [PATCH v3 05/10] iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw(), Trevor Gamblin
      • Re: [PATCH v3 05/10] iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw(), Uwe Kleine-König
  • [PATCH v3 07/10] iio: adc: ad_sigma_delta: Store information about reset sequence length, Uwe Kleine-König
    • Re: [PATCH v3 07/10] iio: adc: ad_sigma_delta: Store information about reset sequence length, Andy Shevchenko
  • [PATCH v3 06/10] iio: adc: ad_sigma_delta: Fix a race condition, Uwe Kleine-König
    • Re: [PATCH v3 06/10] iio: adc: ad_sigma_delta: Fix a race condition, Andy Shevchenko
  • [PATCH v3 09/10] iio: adc: ad7124: Add error reporting during probe, Uwe Kleine-König
    • Re: [PATCH v3 09/10] iio: adc: ad7124: Add error reporting during probe, Trevor Gamblin
    • Re: [PATCH v3 09/10] iio: adc: ad7124: Add error reporting during probe, Andy Shevchenko
  • [PATCH v3 08/10] iio: adc: ad_sigma_delta: Check for previous ready signals, Uwe Kleine-König
    • Re: [PATCH v3 08/10] iio: adc: ad_sigma_delta: Check for previous ready signals, Andy Shevchenko
  • [PATCH v3 10/10] iio: adc: ad7124: Implement temperature measurement, Uwe Kleine-König
    • Re: [PATCH v3 10/10] iio: adc: ad7124: Implement temperature measurement, David Lechner
    • Re: [PATCH v3 10/10] iio: adc: ad7124: Implement temperature measurement, Andy Shevchenko
• [PATCH 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler, Antoniu Miclaus
  • [PATCH 2/2] iio: frequency: adf4371: add ref doubler and div2, Antoniu Miclaus
    • Re: [PATCH 2/2] iio: frequency: adf4371: add ref doubler and div2, Jonathan Cameron
  • Re: [PATCH 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler, Jonathan Cameron
• [PATCH 0/2] iio: Use __cleanup for a few ROHM sensors, Matti Vaittinen
  • [PATCH 1/2] iio: bu27034: simplify using guard(mutex), Matti Vaittinen
    • Re: [PATCH 1/2] iio: bu27034: simplify using guard(mutex), Javier Carrasco
  • [PATCH 2/2] iio: bm1390: simplify using guard(mutex), Matti Vaittinen
    • Re: [PATCH 2/2] iio: bm1390: simplify using guard(mutex), Javier Carrasco
  • Re: [PATCH 0/2] iio: Use __cleanup for a few ROHM sensors, Javier Carrasco
    • Re: [PATCH 0/2] iio: Use __cleanup for a few ROHM sensors, Matti Vaittinen
      • Re: [PATCH 0/2] iio: Use __cleanup for a few ROHM sensors, Javier Carrasco
  • Re: [PATCH 0/2] iio: Use __cleanup for a few ROHM sensors, Jonathan Cameron
• [PATCH 0/9] Add support for Software mode on AD7606's iio backend driver, Guillaume Stols
  • [PATCH 1/9] iio: adc: ad7606: Fix hardcoded offset in the ADC channels, Guillaume Stols
  • [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant, Guillaume Stols
    • Re: [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant, David Lechner
      • Re: [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant, Conor Dooley
  • [PATCH 3/9] iio:adc: ad7606: Move the software mode configuration, Guillaume Stols
  • [PATCH 4/9] iio: adc: ad7606: Move software functions into common file, Guillaume Stols
  • [PATCH 6/9] iio: adc: adi-axi-adc: Add support for AD7606 register writing, Guillaume Stols
  • [PATCH 5/9] iio: adc: adi-axi-adc: Add platform children support, Guillaume Stols
  • [PATCH 7/9] iio: adc: ad7606: change r/w_register signature, Guillaume Stols
  • [PATCH 8/9] iio: adc: ad7606: Simplify channel macros, Guillaume Stols
  • [PATCH 9/9] iio: adc: ad7606: Add support for writing registers when using backend, Guillaume Stols
• [PATCH] iio: hid-sensor-prox: Fix invalid read_raw for attention, Ricardo Ribalda
  • Re: [PATCH] iio: hid-sensor-prox: Fix invalid read_raw for attention, srinivas pandruvada
    • Re: [PATCH] iio: hid-sensor-prox: Fix invalid read_raw for attention, Ricardo Ribalda
      • Re: [PATCH] iio: hid-sensor-prox: Fix invalid read_raw for attention, srinivas pandruvada
• [PATCH v2 0/8] Support ROHM KX134ACR-LBZ, Matti Vaittinen
  • [PATCH v2 1/8] iio: accel: kx022a: Improve reset delay, Matti Vaittinen
    • Re: [PATCH v2 1/8] iio: accel: kx022a: Improve reset delay, Jonathan Cameron
  • [PATCH v2 2/8] iio: gts: Simplify using __free, Matti Vaittinen
    • Re: [PATCH v2 2/8] iio: gts: Simplify using __free, Jonathan Cameron
  • [PATCH v2 3/8] iio: accel: kx022a: Use cleanup.h helpers, Matti Vaittinen
    • Re: [PATCH v2 3/8] iio: accel: kx022a: Use cleanup.h helpers, Jonathan Cameron
  • [PATCH v2 4/8] iio: accel: kx022a: Support ICs with different G-ranges, Matti Vaittinen
  • [PATCH v2 5/8] dt-bindings: ROHM KX134ACR-LBZ, Matti Vaittinen
  • [PATCH v2 6/8] iio: kx022a: Support ROHM KX134ACR-LBZ, Matti Vaittinen
  • [PATCH v2 7/8] dt-bindings: iio: kx022a: Support KX134-1211, Matti Vaittinen
    • Re: [PATCH v2 7/8] dt-bindings: iio: kx022a: Support KX134-1211, Conor Dooley
  • [PATCH v2 8/8] iio: accel: kx022a: Support KX134-1211, Matti Vaittinen
    • Re: [PATCH v2 8/8] iio: accel: kx022a: Support KX134-1211, Jonathan Cameron
• [PATCH 00/11] iio: use devm_regulator_get_enable_read_voltage round 6, David Lechner
  • [PATCH 01/11] iio: dac: ad5624r: fix struct name in doc comment, David Lechner
  • [PATCH 02/11] iio: dac: ad5686: fix struct name in doc comment, David Lechner
  • [PATCH 03/11] iio: dac: ad5686: use devm_regulator_get_enable_read_voltage(), David Lechner
  • [PATCH 04/11] iio: dac: ad5686: drop driver remove function, David Lechner
    • Re: [PATCH 04/11] iio: dac: ad5686: drop driver remove function, Jonathan Cameron
  • [PATCH 05/11] iio: dac: ad7293: use devm_regulator_get_enable_read_voltage(), David Lechner
    • Re: [PATCH 05/11] iio: dac: ad7293: use devm_regulator_get_enable_read_voltage(), Jonathan Cameron
  • [PATCH 06/11] iio: dac: ad8801: use devm_regulator_get_enable_read_voltage(), David Lechner
    • Re: [PATCH 06/11] iio: dac: ad8801: use devm_regulator_get_enable_read_voltage(), Jonathan Cameron
  • [PATCH 07/11] iio: dac ad8801: drop driver remove function, David Lechner
    • Re: [PATCH 07/11] iio: dac ad8801: drop driver remove function, Jonathan Cameron
  • [PATCH 08/11] iio: dac: ltc2632: use devm_regulator_get_enable_read_voltage(), David Lechner
    • Re: [PATCH 08/11] iio: dac: ltc2632: use devm_regulator_get_enable_read_voltage(), Jonathan Cameron
  • [PATCH 09/11] iio: dac ltc2632: drop driver remove function, David Lechner
    • Re: [PATCH 09/11] iio: dac ltc2632: drop driver remove function, Jonathan Cameron
  • [PATCH 10/11] iio: dac: ltc2688: use devm_regulator_get_enable_read_voltage(), David Lechner
    • Re: [PATCH 10/11] iio: dac: ltc2688: use devm_regulator_get_enable_read_voltage(), Jonathan Cameron
  • [PATCH 11/11] iio: dac: max5821: use devm_regulator_get_enable_read_voltage(), David Lechner
• [PATCH v6 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor., Per-Daniel Olsson
  • [PATCH v6 2/2] iio: light: Add support for TI OPT4060 color sensor, Per-Daniel Olsson
    • Re: [PATCH v6 2/2] iio: light: Add support for TI OPT4060 color sensor, Javier Carrasco
  • [PATCH v6 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor, Per-Daniel Olsson
    • Re: [PATCH v6 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor, Javier Carrasco
• [PATCH 0/2] Add support for Avago/Broadcom APDS9160, Mikael Gonella-Bolduc via B4 Relay
  • [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding, Mikael Gonella-Bolduc via B4 Relay
    • Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding, Conor Dooley
      • Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding, Krzysztof Kozlowski
        • Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding, Mikael Gonella-Bolduc
          • Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding, Krzysztof Kozlowski
    • Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding, Krzysztof Kozlowski
  • [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver, Mikael Gonella-Bolduc via B4 Relay
    • Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver, Krzysztof Kozlowski
    • Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver, Javier Carrasco
    • Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver, kernel test robot
• [PATCH] iio: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw(), Uwe Kleine-König
• [PATCH v3 0/4] Timestamp and PulSAR support for ad4000, Marcelo Schmitt
  • [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Marcelo Schmitt
    • Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Krzysztof Kozlowski
      • Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Marcelo Schmitt
        • Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Krzysztof Kozlowski
          • Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Marcelo Schmitt
            • Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Krzysztof Kozlowski
  • [PATCH v3 2/4] iio: adc: ad4000: Add timestamp channel, Marcelo Schmitt
  • [PATCH v3 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers, Marcelo Schmitt
  • [PATCH v3 4/4] iio: adc: ad4000: Add support for PulSAR devices, Marcelo Schmitt
• [PATCH v2 0/4] Timestamp and PulSAR support for ad4000, Marcelo Schmitt
  • [PATCH v2 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Marcelo Schmitt
  • [PATCH v2 2/4] iio: adc: ad4000: Add timestamp channel, Marcelo Schmitt
  • [PATCH v2 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers, Marcelo Schmitt
    • Re: [PATCH v2 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers, David Lechner
      • Re: [PATCH v2 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers, Marcelo Schmitt
  • [PATCH v2 4/4] iio: adc: ad4000: Add support for PulSAR devices, Marcelo Schmitt
• [PATCH v2 0/2] iio: adc: ad7124: Implement input validation, Uwe Kleine-König
  • [PATCH v2 2/2] iio: adc: ad7124: Refuse invalid input specifiers, Uwe Kleine-König
  • [PATCH v2 1/2] iio: adc: ad7124: Don't create more channels than the driver can handle, Uwe Kleine-König
• [GIT PULL] pwm: Changes for 6.13-rc1, Uwe Kleine-König
  • Re: [GIT PULL] pwm: Changes for 6.13-rc1, pr-tracker-bot
• [PATCH] iio: adc: ti-ads1298: Add NULL check in ads1298_init, Charles Han
  • Re: [PATCH] iio: adc: ti-ads1298: Add NULL check in ads1298_init(), Markus Elfring
• [PATCH v2 00/22] iio: accel: adxl345: add FIFO operating with IRQ triggered watermark events, Lothar Rubusch
  • [PATCH v2 01/22] iio: accel: adxl345: fix comment on probe, Lothar Rubusch
  • [PATCH v2 02/22] iio: accel: adxl345: rename variable data to st, Lothar Rubusch
  • [PATCH v2 03/22] iio: accel: adxl345: rename struct adxl34x_state, Lothar Rubusch
  • [PATCH v2 04/22] iio: accel: adxl345: rename to adxl34x_channels, Lothar Rubusch
  • [PATCH v2 05/22] iio: accel: adxl345: measure right-justified, Lothar Rubusch
  • [PATCH v2 06/22] iio: accel: adxl345: add function to switch measuring, Lothar Rubusch
  • [PATCH v2 07/22] iio: accel: adxl345: initialize IRQ number, Lothar Rubusch
  • [PATCH v2 08/22] iio: accel: adxl345: initialize FIFO delay value for SPI, Lothar Rubusch
  • [PATCH v2 09/22] iio: accel: adxl345: unexpose private defines, Lothar Rubusch
  • [PATCH v2 10/22] iio: accel: adxl345: set interrupt line to INT1, Lothar Rubusch
  • [PATCH v2 11/22] iio: accel: adxl345: import adxl345 general data, Lothar Rubusch
  • [PATCH v2 12/22] iio: accel: adxl345: elaborate iio channel definition, Lothar Rubusch
  • [PATCH v2 13/22] iio: accel: adxl345: add trigger handler, Lothar Rubusch
  • [PATCH v2 14/22] iio: accel: adxl345: read FIFO entries, Lothar Rubusch
  • [PATCH v2 15/22] iio: accel: adxl345: reset the FIFO on error, Lothar Rubusch
  • [PATCH v2 16/22] iio: accel: adxl345: register trigger ops, Lothar Rubusch
  • [PATCH v2 17/22] iio: accel: adxl345: push FIFO data to iio, Lothar Rubusch
  • [PATCH v2 18/22] iio: accel: adxl345: start measure at buffer en/disable, Lothar Rubusch
  • [PATCH v2 19/22] iio: accel: adxl345: prepare FIFO watermark handling, Lothar Rubusch
  • [PATCH v2 20/22] iio: accel: adxl345: use FIFO with watermark IRQ, Lothar Rubusch
  • [PATCH v2 21/22] iio: accel: adxl345: sync FIFO reading with sensor, Lothar Rubusch
  • [PATCH v2 22/22] iio: accel: adxl345: add debug printout, Lothar Rubusch
• [PATCH 1/1] iio: gyro: fxas21002c: Fix missing data update in trigger handler, Frank Li
  • Re: [PATCH 1/1] iio: gyro: fxas21002c: Fix missing data update in trigger handler, Jonathan Cameron
• [PATCH v2 0/2] iio: gyro: Add support for iam20380 sensor, Frank Li
  • [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Add invensense,iam20380 compatible string, Frank Li
  • [PATCH v2 2/2] iio: gyro: Add support for iam20380 sensor, Frank Li
    • Re: [PATCH v2 2/2] iio: gyro: Add support for iam20380 sensor, Jean-Baptiste Maneyrol
      • Re: [PATCH v2 2/2] iio: gyro: Add support for iam20380 sensor, Jonathan Cameron
• [PATCH v2 0/4] iio: accel: fxls8962af: add fxls8967af and fxls8974cf, Frank Li
  • [PATCH v2 1/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8967af', Frank Li
    • Re: [PATCH v2 1/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8967af', Rob Herring (Arm)
  • [PATCH v2 3/4] iio: accel: fxls8962af: add fxls8974cf support, Frank Li
  • [PATCH v2 4/4] iio: accel: fxls8962af: add fxls8967af support, Frank Li
  • [PATCH v2 2/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8974cf', Frank Li
    • Re: [PATCH v2 2/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8974cf', Rob Herring (Arm)
  • Re: [PATCH v2 0/4] iio: accel: fxls8962af: add fxls8967af and fxls8974cf, Jonathan Cameron
• [PATCH v5 00/16] spi: axi-spi-engine: add offload support, David Lechner
  • [PATCH v5 01/16] spi: add basic support for SPI offloading, David Lechner
  • [PATCH v5 02/16] spi: offload: add support for hardware triggers, David Lechner
  • [PATCH v5 03/16] spi: dt-bindings: add trigger-source.yaml, David Lechner
    • Re: [PATCH v5 03/16] spi: dt-bindings: add trigger-source.yaml, Rob Herring
  • [PATCH v5 05/16] spi: offload-trigger: add PWM trigger driver, David Lechner
  • [PATCH v5 06/16] spi: add offload TX/RX streaming APIs, David Lechner
  • [PATCH v5 07/16] spi: dt-bindings: axi-spi-engine: add SPI offload properties, David Lechner
    • Re: [PATCH v5 07/16] spi: dt-bindings: axi-spi-engine: add SPI offload properties, Rob Herring
      • Re: [PATCH v5 07/16] spi: dt-bindings: axi-spi-engine: add SPI offload properties, David Lechner
  • [PATCH v5 04/16] spi: dt-bindings: add PWM SPI offload trigger, David Lechner
    • Re: [PATCH v5 04/16] spi: dt-bindings: add PWM SPI offload trigger, Rob Herring
  • [PATCH v5 08/16] spi: axi-spi-engine: implement offload support, David Lechner
  • [PATCH v5 09/16] iio: buffer-dmaengine: document iio_dmaengine_buffer_setup_ext, David Lechner
  • [PATCH v5 10/16] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2(), David Lechner
  • [PATCH v5 15/16] iio: adc: ad4695: Add support for SPI offload, David Lechner
  • [PATCH v5 11/16] iio: adc: ad7944: don't use storagebits for sizing, David Lechner
  • [PATCH v5 16/16] doc: iio: ad4695: add SPI offload support, David Lechner
  • [PATCH v5 12/16] iio: adc: ad7944: add support for SPI offload, David Lechner
  • [PATCH v5 14/16] dt-bindings: iio: adc: adi,ad4695: add SPI offload properties, David Lechner
    • Re: [PATCH v5 14/16] dt-bindings: iio: adc: adi,ad4695: add SPI offload properties, Rob Herring
  • [PATCH v5 13/16] doc: iio: ad7944: describe offload support, David Lechner
• [PATCH v13] iio: adc: pac1921: Add ACPI support to Microchip pac1921, victor.duicu
  • Re: [PATCH v13] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Jonathan Cameron
• [PATCH RFC] iio: adc: ad7173: add openwire detection support for single conversions, Guillaume Ranquet
  • Re: [PATCH RFC] iio: adc: ad7173: add openwire detection support for single conversions, David Lechner
• [PATCH] iio: adc: ad7173: add calibration support, Guillaume Ranquet
• [PATCH v12] iio: adc: pac1921: Add ACPI support to Microchip pac1921, victor.duicu
  • Re: [PATCH v12] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Matteo Martelli
• [PATCH 0/4] Timestamp and PulSAR support for ad4000, Marcelo Schmitt
  • [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Marcelo Schmitt
    • Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, David Lechner
      • Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Marcelo Schmitt
        • Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, David Lechner
        • Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, Marcelo Schmitt
          • Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR, David Lechner
  • [PATCH 2/4] iio: adc: ad4000: Add timestamp channel, Marcelo Schmitt
    • Re: [PATCH 2/4] iio: adc: ad4000: Add timestamp channel, David Lechner
  • [PATCH 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers, Marcelo Schmitt
    • Re: [PATCH 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers, David Lechner
      • Re: [PATCH 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers, Marcelo Schmitt
  • [PATCH 4/4] iio: adc: ad4000: Add support for PulSAR devices, Marcelo Schmitt
    • Re: [PATCH 4/4] iio: adc: ad4000: Add support for PulSAR devices, David Lechner
      • Re: [PATCH 4/4] iio: adc: ad4000: Add support for PulSAR devices, Marcelo Schmitt
• [PATCH 00/22] iio: accel: adxl345: add FIFO operating with IRQ triggered watermark events, Lothar Rubusch
  • [PATCH 01/22] iio: accel: adxl345: fix comment on probe, Lothar Rubusch
  • [PATCH 02/22] iio: accel: adxl345: rename variable data to st, Lothar Rubusch
  • [PATCH 04/22] iio: accel: adxl345: rename to adxl34x_channels, Lothar Rubusch
  • [PATCH 03/22] iio: accel: adxl345: rename struct adxl34x_state, Lothar Rubusch
  • [PATCH 05/22] iio: accel: adxl345: measure right-justified, Lothar Rubusch
  • [PATCH 06/22] iio: accel: adxl345: add function to switch measuring, Lothar Rubusch
    • Re: [PATCH 06/22] iio: accel: adxl345: add function to switch measuring, kernel test robot
  • [PATCH 07/22] iio: accel: adxl345: initialize IRQ number, Lothar Rubusch
  • [PATCH 08/22] iio: accel: adxl345: initialize FIFO delay value for SPI, Lothar Rubusch
  • [PATCH 09/22] iio: accel: adxl345: unexpose private defines, Lothar Rubusch
  • [PATCH 10/22] iio: accel: adxl345: set interrupt line to INT1, Lothar Rubusch
  • [PATCH 11/22] iio: accel: adxl345: import adxl345 general data, Lothar Rubusch
  • [PATCH 12/22] iio: accel: adxl345: elaborate iio channel definition, Lothar Rubusch
  • [PATCH 13/22] iio: accel: adxl345: add trigger handler, Lothar Rubusch
  • [PATCH 14/22] iio: accel: adxl345: read FIFO entries, Lothar Rubusch
  • [PATCH 15/22] iio: accel: adxl345: reset the FIFO on error, Lothar Rubusch
    • Re: [PATCH 15/22] iio: accel: adxl345: reset the FIFO on error, kernel test robot
    • Re: [PATCH 15/22] iio: accel: adxl345: reset the FIFO on error, kernel test robot
    • Re: [PATCH 15/22] iio: accel: adxl345: reset the FIFO on error, kernel test robot
  • [PATCH 16/22] iio: accel: adxl345: register trigger ops, Lothar Rubusch
  • [PATCH 17/22] iio: accel: adxl345: push FIFO data to iio, Lothar Rubusch
  • [PATCH 18/22] iio: accel: adxl345: start measure at buffer en/disable, Lothar Rubusch
  • [PATCH 19/22] iio: accel: adxl345: prepare FIFO watermark handling, Lothar Rubusch
  • [PATCH 20/22] iio: accel: adxl345: use FIFO with watermark IRQ, Lothar Rubusch
  • [PATCH 21/22] iio: accel: adxl345: sync FIFO reading with sensor, Lothar Rubusch
  • [PATCH 22/22] iio: accel: adxl345: add debug printout, Lothar Rubusch
    • Re: [PATCH 22/22] iio: accel: adxl345: add debug printout, kernel test robot
• [PATCH 0/2] Add support for ADF4382, Ciprian Hegbeli
  • [PATCH 2/2] iio: frequency: Add ADF4382, Ciprian Hegbeli
    • Re: [PATCH 2/2] iio: frequency: Add ADF4382, Javier Carrasco
  • [PATCH 1/2] dt-bindings: iio: frequency: Add ADF4382, Ciprian Hegbeli
    • Re: [PATCH 1/2] dt-bindings: iio: frequency: Add ADF4382, Javier Carrasco
    • Re: [PATCH 1/2] dt-bindings: iio: frequency: Add ADF4382, Javier Carrasco
    • Re: [PATCH 1/2] dt-bindings: iio: frequency: Add ADF4382, Rob Herring (Arm)
    • Re: [PATCH 1/2] dt-bindings: iio: frequency: Add ADF4382, Conor Dooley
• [PATCH] iio: adc: stm32-dfsdm: handle label as an optional property, Olivier Moysan
• [PATCH] iio: light: cm3232: Reset before reading HW ID, Cibil Pankiras
  • <Possible follow-ups>
  • [PATCH] iio: light: cm3232: Reset before reading HW ID, Cibil
• [PATCH v11] iio: adc: pac1921: Add ACPI support to Microchip pac1921, victor.duicu
  • Re: [PATCH v11] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Matteo Martelli
    • Re: [PATCH v11] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Victor.Duicu
      • Re: [PATCH v11] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Matteo Martelli
        • Re: [PATCH v11] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Jonathan Cameron
• [PATCH] iio: accel: kx022a: Improve reset delay, Matti Vaittinen
  • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Nuno Sá
    • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Matti Vaittinen
      • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Nuno Sá
        • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Matti Vaittinen
          • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Nuno Sá
            • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Matti Vaittinen
              • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Nuno Sá
                • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Matti Vaittinen
                  • Re: [PATCH] iio: accel: kx022a: Improve reset delay, Nuno Sá
• [PATCH v2 0/3] iio: adc: ad4695: add new regmap callbacks, timing improvements, Trevor Gamblin
  • [PATCH v2 1/3] iio: adc: ad4695: fix buffered read, single sample timings, Trevor Gamblin
  • [PATCH v2 3/3] iio: adc: ad4695: add custom regmap bus callbacks, Trevor Gamblin
  • [PATCH v2 2/3] iio: adc: ad4695: make ad4695_exit_conversion_mode() more robust, Trevor Gamblin
  • Re: [PATCH v2 0/3] iio: adc: ad4695: add new regmap callbacks, timing improvements, David Lechner
• [PATCH] iio: imu: inv_icm42600: fix timestamps after suspend if sensor is on, Jean-Baptiste Maneyrol via B4 Relay
• [PATCH 0/4] iio: accel: fxls8962af: add fxls8967af and fxls8974cf, Frank Li
  • [PATCH 2/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8974cf', Frank Li
    • Re: [PATCH 2/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8974cf', Sean Nyekjaer
    • Re: [PATCH 2/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8974cf', Conor Dooley
  • [PATCH 4/4] iio: accel: fxls8962af: add fxls8967af support, Frank Li
    • Re: [PATCH 4/4] iio: accel: fxls8962af: add fxls8967af support, Sean Nyekjaer
  • [PATCH 1/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8967af', Frank Li
    • Re: [PATCH 1/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8967af', Sean Nyekjaer
    • Re: [PATCH 1/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8967af', Conor Dooley
  • [PATCH 3/4] iio: accel: fxls8962af: add fxls8974cf support, Frank Li
    • Re: [PATCH 3/4] iio: accel: fxls8962af: add fxls8974cf support, Sean Nyekjaer
• [PATCH 0/2] iio: adc: ad4695: move dt-bindings header, David Lechner
  • [PATCH 2/2] dt-bindings: iio: adc: adi,ad4695: change include path, David Lechner
    • Re: [PATCH 2/2] dt-bindings: iio: adc: adi,ad4695: change include path, Rob Herring (Arm)
      • Re: [PATCH 2/2] dt-bindings: iio: adc: adi,ad4695: change include path, David Lechner
    • Re: [PATCH 2/2] dt-bindings: iio: adc: adi,ad4695: change include path, Rob Herring (Arm)
  • [PATCH 1/2] iio: adc: ad4695: move dt-bindings header, David Lechner
• [PATCH 0/2] iio: gyro: Add support for iam20380 sensor, Frank Li
  • [PATCH 2/2] iio: gyro: Add support for iam20380 sensor, Frank Li
    • Re: [PATCH 2/2] iio: gyro: Add support for iam20380 sensor, Jean-Baptiste Maneyrol
  • [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add invensense,iam20380 compatible string, Frank Li
    • Re: [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add invensense,iam20380 compatible string, Conor Dooley
• [no subject], Unknown
• [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138, Tobias Sperling
  • <Possible follow-ups>
  • [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138, Sperling, Tobias
    • Re: [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138, Rob Herring
      • Re: [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138, Sperling, Tobias
        • Re: [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138, Rob Herring
• [PATCH v10] iio: adc: pac1921: Add ACPI support to Microchip pac1921, victor.duicu
  • Re: [PATCH v10] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Andy Shevchenko
    • Re: [PATCH v10] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Victor.Duicu
• [PATCH 0/5] Support ROHM KX134ACR-LBZ, Matti Vaittinen
  • [PATCH 1/5] iio: gts: Simplify using __free, Matti Vaittinen
  • [PATCH 2/5] iio: accel: kx022a: Use cleanup.h helpers, Matti Vaittinen
  • [PATCH 3/5] iio: accel: kx022a: Support ICs with different G-ranges, Matti Vaittinen
  • [PATCH 5/5] iio: kx022a: Support ROHM KX134ACR-LBZ, Matti Vaittinen
  • [PATCH 4/5] dt-bindings: ROHM KX134ACR-LBZ, Matti Vaittinen
    • Re: [PATCH 4/5] dt-bindings: ROHM KX134ACR-LBZ, Conor Dooley
      • Re: [PATCH 4/5] dt-bindings: ROHM KX134ACR-LBZ, Matti Vaittinen
• [PATCH v9] iio: adc: pac1921: Add ACPI support to Microchip pac1921, victor.duicu
  • Re: [PATCH v9] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Andy Shevchenko
• [PATCH v4 0/3] hwmon: tmp108: Add support for P3T1085, Frank Li
  • [PATCH v4 2/3] hwmon: tmp108: Add support for I3C device, Frank Li
    • Re: [PATCH v4 2/3] hwmon: tmp108: Add support for I3C device, Guenter Roeck
  • [PATCH v4 3/3] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085, Frank Li
    • Re: [PATCH v4 3/3] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085, Guenter Roeck
  • [PATCH v4 1/3] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support, Frank Li
    • Re: [PATCH v4 1/3] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support, Guenter Roeck
• [PATCH 2/2] iio: adc: Add driver for ADS7128 / ADS7138, Tobias Sperling
  • <Possible follow-ups>
  • [PATCH 2/2] iio: adc: Add driver for ADS7128 / ADS7138, Sperling, Tobias
• [PATCH v2] iio: imu: inv_icm42600: fix spi burst write not supported, Jean-Baptiste Maneyrol via B4 Relay
  • Re: [PATCH v2] iio: imu: inv_icm42600: fix spi burst write not supported, Jonathan Cameron
• [PATCH v4] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
  • Re: [PATCH v4] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), David Lechner
  • Re: [PATCH v4] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jonathan Cameron
    • Re: [PATCH v4] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
• [PATCH v4 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Frank Li
  • [PATCH v4 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4, Frank Li
  • Re: [PATCH v4 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Jonathan Cameron
• [PATCH v3] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
  • Re: [PATCH v3] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), David Lechner
    • Re: [PATCH v3] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
      • Re: [PATCH v3] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), David Lechner
        • Re: [PATCH v3] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
• [PATCH v3 0/5] hwmon: tmp108: Add support for P3T1085, Frank Li
  • [PATCH v3 1/5] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string, Frank Li
    • Re: [PATCH v3 1/5] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string, Guenter Roeck
  • [PATCH v3 2/5] hwmon: tmp108: Add NXP p3t1085 support, Frank Li
    • Re: [PATCH v3 2/5] hwmon: tmp108: Add NXP p3t1085 support, Guenter Roeck
  • [PATCH v3 3/5] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support, Frank Li
    • Re: [PATCH v3 3/5] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support, Guenter Roeck
      • Re: [PATCH v3 3/5] hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support, Frank Li
  • [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device, Frank Li
    • Re: [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device, Guenter Roeck
      • Re: [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device, Guenter Roeck
        • Re: [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device, Guenter Roeck
          • Re: [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device, Frank Li
            • Re: [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device, Guenter Roeck
    • Re: [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device, Guenter Roeck
    • Re: [PATCH v3 4/5] hwmon: tmp108: Add support for I3C device, kernel test robot
  • [PATCH v3 5/5] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085, Frank Li
    • Re: [PATCH v3 5/5] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085, Marco Felsch
      • Re: [PATCH v3 5/5] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085, Frank Li
• [PATCH 0/3] iio: adc: ad4695: add new regmap callbacks, timing improvements, Trevor Gamblin
  • [PATCH 2/3] iio: adc: ad4695: make ad4695_exit_conversion_mode() more robust, Trevor Gamblin
  • [PATCH 1/3] iio: adc: ad4695: fix buffered read timing in ad4695_buffer_preenable(), Trevor Gamblin
  • [PATCH 3/3] iio: adc: ad4695: add custom regmap bus callbacks, Trevor Gamblin
    • Re: [PATCH 3/3] iio: adc: ad4695: add custom regmap bus callbacks, Trevor Gamblin
    • Re: [PATCH 3/3] iio: adc: ad4695: add custom regmap bus callbacks, Trevor Gamblin
  • Re: [PATCH 0/3] iio: adc: ad4695: add new regmap callbacks, timing improvements, Trevor Gamblin
• [PATCH] iio: dac: Fix converters spelling typo., Karan Sanghavi
  • Re: [PATCH] iio: dac: Fix converters spelling typo., Jonathan Cameron
• [PATCH v6 0/8] *** Add support for AD485x DAS Family ***, Antoniu Miclaus
  • [PATCH v6 1/8] iio: backend: add API for interface get, Antoniu Miclaus
  • [PATCH v6 2/8] iio: backend: add support for data size set, Antoniu Miclaus
  • [PATCH v6 3/8] iio: backend: add API for oversampling, Antoniu Miclaus
    • Re: [PATCH v6 3/8] iio: backend: add API for oversampling, Nuno Sá
      • Re: [PATCH v6 3/8] iio: backend: add API for oversampling, Jonathan Cameron
        • Re: [PATCH v6 3/8] iio: backend: add API for oversampling, Jonathan Cameron
  • [PATCH v6 4/8] iio: adc: adi-axi-adc: add interface type, Antoniu Miclaus
  • [PATCH v6 6/8] iio: adc: adi-axi-adc: add oversampling, Antoniu Miclaus
    • Re: [PATCH v6 6/8] iio: adc: adi-axi-adc: add oversampling, David Lechner
    • Re: [PATCH v6 6/8] iio: adc: adi-axi-adc: add oversampling, Jonathan Cameron
  • [PATCH v6 5/8] iio: adc: adi-axi-adc: set data format, Antoniu Miclaus
    • Re: [PATCH v6 5/8] iio: adc: adi-axi-adc: set data format, David Lechner
  • [PATCH v6 7/8] dt-bindings: iio: adc: add ad4851, Antoniu Miclaus
  • [PATCH v6 8/8] iio: adc: ad4851: add ad485x driver, Antoniu Miclaus
    • Re: [PATCH v6 8/8] iio: adc: ad4851: add ad485x driver, David Lechner
      • RE: [PATCH v6 8/8] iio: adc: ad4851: add ad485x driver, Miclaus, Antoniu
        • Re: [PATCH v6 8/8] iio: adc: ad4851: add ad485x driver, David Lechner
          • RE: [PATCH v6 8/8] iio: adc: ad4851: add ad485x driver, Miclaus, Antoniu
• [PATCH v2] iio: light: veml6030: add support for triggered buffer, Javier Carrasco
  • Re: [PATCH v2] iio: light: veml6030: add support for triggered buffer, Jonathan Cameron
    • Re: [PATCH v2] iio: light: veml6030: add support for triggered buffer, Javier Carrasco
• [PATCH] iio: imu: lsm6dsx: Use i3cdev_to_dev to get device pointer, Guenter Roeck
  • Re: [PATCH] iio: imu: lsm6dsx: Use i3cdev_to_dev to get device pointer, Jonathan Cameron
• [PULL] IIO: 2nd set of new device support, features and cleanup for 6.13, Jonathan Cameron
  • Re: [PULL] IIO: 2nd set of new device support, features and cleanup for 6.13, Greg KH
• [PATCH v2 0/4] iio: temperature: Add support for P3T1085, Frank Li
  • [PATCH v2 1/4] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string, Frank Li
    • Re: [PATCH v2 1/4] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string, Krzysztof Kozlowski
  • [PATCH v2 2/4] hwmon: tmp108: Add help function tmp108_common_probe(), Frank Li
    • Re: [PATCH v2 2/4] hwmon: tmp108: Add help function tmp108_common_probe(), Guenter Roeck
      • Re: [PATCH v2 2/4] hwmon: tmp108: Add help function tmp108_common_probe(), Guenter Roeck
  • [PATCH v2 3/4] hwmon: tmp108: Add support for I3C device, Frank Li
    • Re: [PATCH v2 3/4] hwmon: tmp108: Add support for I3C device, Guenter Roeck
    • Re: [PATCH v2 3/4] hwmon: tmp108: Add support for I3C device, Jonathan Cameron
      • Re: [PATCH v2 3/4] hwmon: tmp108: Add support for I3C device, Guenter Roeck
        • Re: [PATCH v2 3/4] hwmon: tmp108: Add support for I3C device, Jonathan Cameron
          • Re: [PATCH v2 3/4] hwmon: tmp108: Add support for I3C device, Guenter Roeck
            • Re: [PATCH v2 3/4] hwmon: tmp108: Add support for I3C device, Frank Li
  • [PATCH v2 4/4] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085, Frank Li
  • Re: [PATCH v2 0/4] iio: temperature: Add support for P3T1085, Guenter Roeck
• [PATCH v2] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
  • Re: [PATCH v2] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jonathan Cameron
    • Re: [PATCH v2] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
      • Re: [PATCH v2] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jonathan Cameron
• [PATCH 0/2] iio: adc: ad7124: Implement input validation, Uwe Kleine-König
  • [PATCH 1/2] iio: adc: ad7124: Don't create more channels than the hardware is capable of, Uwe Kleine-König
    • Re: [PATCH 1/2] iio: adc: ad7124: Don't create more channels than the hardware is capable of, David Lechner
      • Re: [PATCH 1/2] iio: adc: ad7124: Don't create more channels than the hardware is capable of, Uwe Kleine-König
        • Re: [PATCH 1/2] iio: adc: ad7124: Don't create more channels than the hardware is capable of, David Lechner
          • Re: [PATCH 1/2] iio: adc: ad7124: Don't create more channels than the hardware is capable of, Jonathan Cameron
    • Re: [PATCH 1/2] iio: adc: ad7124: Don't create more channels than the hardware is capable of, Nuno Sá
      • Re: [PATCH 1/2] iio: adc: ad7124: Don't create more channels than the hardware is capable of, Uwe Kleine-König
        • Re: [PATCH 1/2] iio: adc: ad7124: Don't create more channels than the hardware is capable of, Nuno Sá
  • [PATCH 2/2] iio: adc: ad7124: Refuse invalid input specifiers, Uwe Kleine-König
    • Re: [PATCH 2/2] iio: adc: ad7124: Refuse invalid input specifiers, Dan Carpenter
      • Re: [PATCH 2/2] iio: adc: ad7124: Refuse invalid input specifiers, Uwe Kleine-König
• [PATCH] iio: magnetometer: fix if () scoped_guard() formatting, Przemek Kitszel
  • Re: [PATCH] iio: magnetometer: fix if () scoped_guard() formatting, Jonathan Cameron
    • Re: [PATCH] iio: magnetometer: fix if () scoped_guard() formatting, Jonathan Cameron
      • Re: [PATCH] iio: magnetometer: fix if () scoped_guard() formatting, Peter Zijlstra
  • Re: [PATCH] iio: magnetometer: fix if () scoped_guard() formatting, Markus Elfring
• [PATCH v3 0/3] iio: imu: add devices to adis16480 driver, Darius Berghe
  • [PATCH v3 1/3] iio: imu: adis16480: add devices to adis16480 driver, Darius Berghe
  • [PATCH v3 2/3] iio: imu: adis16480: add devices to adis16480 - docs, Darius Berghe
  • [PATCH v3 3/3] dt-bindings: iio: adis16480: add devices to adis16480, Darius Berghe
    • Re: [PATCH v3 3/3] dt-bindings: iio: adis16480: add devices to adis16480, Conor Dooley
  • Re: [PATCH v3 0/3] iio: imu: add devices to adis16480 driver, Jonathan Cameron
• Re: [jic23-iio:togreg 7/7] include/linux/iio/iio.h:788:16: sparse: sparse: incorrect type in return expression (different modifiers), Jonathan Cameron
  • Re: [jic23-iio:togreg 7/7] include/linux/iio/iio.h:788:16: sparse: sparse: incorrect type in return expression (different modifiers), Jonathan Cameron
    • Re: [jic23-iio:togreg 7/7] include/linux/iio/iio.h:788:16: sparse: sparse: incorrect type in return expression (different modifiers), Jonathan Cameron
• [PATCH v8] iio: adc: pac1921: Add ACPI support to Microchip pac1921, victor.duicu
  • Re: [PATCH v8] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Andy Shevchenko
    • Re: [PATCH v8] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Matteo Martelli
      • Re: [PATCH v8] iio: adc: pac1921: Add ACPI support to Microchip pac1921, Andy Shevchenko
• [PATCH 0/3] iio: temperature: Add support for P3T1085, Frank Li
  • [PATCH 1/3] dt-bindings: trivial-devices: Add NXP P3T1085UK I3C/I2C temperature sensor, Frank Li
    • Re: [PATCH 1/3] dt-bindings: trivial-devices: Add NXP P3T1085UK I3C/I2C temperature sensor, Marco Felsch
      • Re: [PATCH 1/3] dt-bindings: trivial-devices: Add NXP P3T1085UK I3C/I2C temperature sensor, Conor Dooley
  • [PATCH 2/3] iio: temperature: Add support for P3T1085, Frank Li
    • Re: [PATCH 2/3] iio: temperature: Add support for P3T1085, Marco Felsch
  • [PATCH 3/3] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085, Frank Li
  • Re: [PATCH 0/3] iio: temperature: Add support for P3T1085, Jonathan Cameron
    • Re: [PATCH 0/3] iio: temperature: Add support for P3T1085, Guenter Roeck
      • Re: [PATCH 0/3] iio: temperature: Add support for P3T1085, Frank Li
• [PATCH] iio: imu: inv_icm42600: fix spi burst write not supported, Jean-Baptiste Maneyrol via B4 Relay
  • Re: [PATCH] iio: imu: inv_icm42600: fix spi burst write not supported, Jonathan Cameron
• IIO tree probably closed for 6.13., Jonathan Cameron
• [PATCH] iio: light: veml6030: add support for triggered buffer, Javier Carrasco
  • Re: [PATCH] iio: light: veml6030: add support for triggered buffer, kernel test robot
    • Re: [PATCH] iio: light: veml6030: add support for triggered buffer, Javier Carrasco
      • Re: [PATCH] iio: light: veml6030: add support for triggered buffer, Jonathan Cameron
  • Re: [PATCH] iio: light: veml6030: add support for triggered buffer, Jonathan Cameron
    • Re: [PATCH] iio: light: veml6030: add support for triggered buffer, Javier Carrasco
      • Re: [PATCH] iio: light: veml6030: add support for triggered buffer, Jonathan Cameron
• [PATCH v3 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Frank Li
  • [PATCH v3 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4, Frank Li
    • Re: [PATCH v3 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4, Jonathan Cameron
  • Re: [PATCH v3 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Christophe JAILLET
    • Re: [PATCH v3 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Frank Li
      • Re: [PATCH v3 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Christophe JAILLET
        • Re: [PATCH v3 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Frank Li
          • Re: [PATCH v3 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Jonathan Cameron
  • Re: [PATCH v3 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Jonathan Cameron
• [PATCH] iio: Move __private marking before struct element priv in struct iio_dev, Jonathan Cameron
  • Re: [PATCH] iio: Move __private marking before struct element priv in struct iio_dev, Andy Shevchenko
    • Re: [PATCH] iio: Move __private marking before struct element priv in struct iio_dev, Jonathan Cameron
      • Re: [PATCH] iio: Move __private marking before struct element priv in struct iio_dev, Jonathan Cameron
• [PULL] IIO: 3rd set of fixes for the 6.12 cycle., Jonathan Cameron
  • Re: [PULL] IIO: 3rd set of fixes for the 6.12 cycle., Jonathan Cameron
  • Re: [PULL] IIO: 3rd set of fixes for the 6.12 cycle., Greg KH
• [PATCH 0/4] staging: Remove contact information from TODO files, Dominik Karol Piątkowski
  • [PATCH 1/4] staging: iio: Remove TODO file, Dominik Karol Piątkowski
    • Re: [PATCH 1/4] staging: iio: Remove TODO file, Jonathan Cameron
      • Re: [PATCH 1/4] staging: iio: Remove TODO file, Greg KH
  • [PATCH 2/4] staging: sm750fb: Remove TODO contact information, Dominik Karol Piątkowski
  • [PATCH 3/4] staging: rtl8723bs: Remove TODO contact information, Dominik Karol Piątkowski
  • [PATCH 4/4] staging: most: Remove TODO contact information, Dominik Karol Piątkowski
• [PATCH v2 0/3] iio: imu: add devices to adis16480 driver, Darius Berghe
  • [PATCH v2 3/3] dt-bindings: iio: adis16480: add devices to adis16480, Darius Berghe
    • Re: [PATCH v2 3/3] dt-bindings: iio: adis16480: add devices to adis16480, Krzysztof Kozlowski
  • [PATCH v2 2/3] iio: imu: adis16480: add devices to adis16480 - docs, Darius Berghe
  • [PATCH v2 1/3] iio: imu: adis16480: add devices to adis16480 driver, Darius Berghe
• [PATCH v9 0/9] Drivers to support the MCU on QNAP NAS devices, Heiko Stuebner
  • [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove, Heiko Stuebner
    • Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove, Jiri Kosina
      • Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove, Heiko Stübner
        • Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove, Jiri Kosina
          • Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove, Lee Jones
  • [PATCH v9 7/9] hwmon: add driver for the hwmon parts of qnap-mcu devices, Heiko Stuebner
  • [PATCH v9 8/9] arm64: dts: rockchip: hook up the MCU on the QNAP TS433, Heiko Stuebner
  • [PATCH v9 6/9] Input: add driver for the input part of qnap-mcu devices, Heiko Stuebner
  • [PATCH v9 3/9] dt-bindings: mfd: add binding for qnap,ts433-mcu devices, Heiko Stuebner
  • [PATCH v9 9/9] arm64: dts: rockchip: set hdd led labels on qnap-ts433, Heiko Stuebner
  • [PATCH v9 5/9] leds: add driver for LEDs from qnap-mcu devices, Heiko Stuebner
  • [PATCH v9 4/9] mfd: add base driver for qnap-mcu devices, Heiko Stuebner
  • [PATCH v9 2/9] mfd: core: make platform_data pointer const in struct mfd_cell, Heiko Stuebner
• [GIT PULL] Counter fixes for 6.12, William Breathitt Gray
  • Re: [GIT PULL] Counter fixes for 6.12, Greg KH
    • Re: [GIT PULL] Counter fixes for 6.12, William Breathitt Gray
      • Re: [GIT PULL] Counter fixes for 6.12, Greg KH
• [GIT PULL] Counter updates for 6.13, William Breathitt Gray
  • Re: [GIT PULL] Counter updates for 6.13, Greg KH
• [PATCH v5 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor., Per-Daniel Olsson
  • [PATCH v5 2/2] iio: light: Add support for TI OPT4060 color sensor, Per-Daniel Olsson
    • Re: [PATCH v5 2/2] iio: light: Add support for TI OPT4060 color sensor, kernel test robot
      • Re: [PATCH v5 2/2] iio: light: Add support for TI OPT4060 color sensor, Jonathan Cameron
    • Re: [PATCH v5 2/2] iio: light: Add support for TI OPT4060 color sensor, Jonathan Cameron
      • Re: [PATCH v5 2/2] iio: light: Add support for TI OPT4060 color sensor, Per-Daniel Olsson
        • Re: [PATCH v5 2/2] iio: light: Add support for TI OPT4060 color sensor, Jonathan Cameron
  • [PATCH v5 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor, Per-Daniel Olsson
• [PATCH] dt-bindings: iio: dac: ad5791: ldac gpio is active low, ahaslam
  • Re: [PATCH] dt-bindings: iio: dac: ad5791: ldac gpio is active low, Conor Dooley
• [PATCH v1 0/2] iio: adc: add Nuvoton NCT720x ADC driver, Eason Yang
  • [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Eason Yang
    • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Chanh Nguyen
      • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Yu-Hsian Yang
        • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Jonathan Cameron
          • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Jonathan Cameron
            • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Yu-Hsian Yang
              • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Jonathan Cameron
      • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Conor Dooley
        • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Yu-Hsian Yang
    • Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs, Jonathan Cameron
  • [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, Eason Yang
    • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, kernel test robot
      • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, Yu-Hsian Yang
    • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, Krzysztof Kozlowski
      • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, Yu-Hsian Yang
        • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, Jonathan Cameron
    • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, anish kumar
      • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, Yu-Hsian Yang
    • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, Andy Shevchenko
    • Re: [PATCH v1 2/2] iio: adc: add Nuvoton NCT720x ADC driver, Jonathan Cameron
• FAILED: Patch "staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()" failed to apply to v4.19-stable tree, Sasha Levin
• [PATCH] iio: trigger: stm32-timer-trigger: Add check for clk_enable(), Jiasheng Jiang
• [PATCH v2 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Frank Li
  • [PATCH v2 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4, Frank Li
  • Re: [PATCH v2 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, kernel test robot
• [PATCH v2 1/2] util_macros.h: fix/rework find_closest() macros, Alexandru Ardelean
  • [PATCH v2 2/2] lib: util_macros_kunit: add kunit test for util_macros.h, Alexandru Ardelean
  • Re: [PATCH v2 1/2] util_macros.h: fix/rework find_closest() macros, Andrew Morton
    • Re: [PATCH v2 1/2] util_macros.h: fix/rework find_closest() macros, Alexandru Ardelean
      • Re: [PATCH v2 1/2] util_macros.h: fix/rework find_closest() macros, Andrew Morton
• [PATCH 0/2] Correct Phase Range Check for AD9832 and AD9834 Drivers, Zicheng Qu
  • [PATCH 1/2] staging: iio: ad9834: Correct phase range check, Zicheng Qu
    • Re: [PATCH 1/2] staging: iio: ad9834: Correct phase range check, Dan Carpenter
  • [PATCH 2/2] staging: iio: ad9832: Correct phase range check, Zicheng Qu
    • Re: [PATCH 2/2] staging: iio: ad9832: Correct phase range check, Dan Carpenter
  • [PATCH v2 0/2] Fix phase range check in AD9832 and AD9834 drivers, Zicheng Qu
    • [PATCH v2 2/2] staging: iio: ad9832: Correct phase range check, Zicheng Qu
    • [PATCH v2 1/2] staging: iio: ad9834: Correct phase range check, Zicheng Qu
      • Re: [PATCH v2 1/2] staging: iio: ad9834: Correct phase range check, Dan Carpenter
        • Re: [PATCH v2 1/2] staging: iio: ad9834: Correct phase range check, Jonathan Cameron
    • Re: [PATCH v2 0/2] Fix phase range check in AD9832 and AD9834 drivers, Jonathan Cameron
• [PATCH 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Frank Li
  • [PATCH 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4, Frank Li
    • RE: [PATCH 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4, Bough Chen
    • Re: [PATCH 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4, kernel test robot
    • Re: [PATCH 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4, kernel test robot
  • RE: [PATCH 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code, Bough Chen
• [PATCH] iio: adc: ad7173: remove unused field, David Lechner
  • Re: [PATCH] iio: adc: ad7173: remove unused field, Nuno Sá
    • Re: [PATCH] iio: adc: ad7173: remove unused field, Jonathan Cameron
• [PATCH v2] counter: ti-ecap-capture: Add check for clk_enable(), Jiasheng Jiang
  • Re: [PATCH v2] counter: ti-ecap-capture: Add check for clk_enable(), William Breathitt Gray
• [PATCH v2] counter: stm32-timer-cnt: Add check for clk_enable(), Jiasheng Jiang
  • Re: [PATCH v2] counter: stm32-timer-cnt: Add check for clk_enable(), William Breathitt Gray
• [PATCH] iio: dac: mcp4725: Use of_property_present() for non-boolean properties, Rob Herring (Arm)
  • Re: [PATCH] iio: dac: mcp4725: Use of_property_present() for non-boolean properties, Jonathan Cameron
• Re: linux-next: build failure after merge of the tip tree, Peter Zijlstra
  • Re: linux-next: build failure after merge of the tip tree, Jonathan Cameron
    • Re: linux-next: build failure after merge of the tip tree, Przemek Kitszel
• [PATCH] iio: adc: ad7124: Disable all channels at probe time, Uwe Kleine-König
  • Re: [PATCH] iio: adc: ad7124: Disable all channels at probe time, Jonathan Cameron
• [PATCH v3 1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML, Stanislav Jakubek
  • [PATCH v3 2/2] dt-bindings: mfd: sprd,sc2731: reference sprd,sc2731-efuse bindings, Stanislav Jakubek
    • Re: [PATCH v3 2/2] dt-bindings: mfd: sprd,sc2731: reference sprd,sc2731-efuse bindings, Lee Jones
      • Re: [PATCH v3 2/2] dt-bindings: mfd: sprd,sc2731: reference sprd,sc2731-efuse bindings, Rob Herring
        • Re: [PATCH v3 2/2] dt-bindings: mfd: sprd,sc2731: reference sprd,sc2731-efuse bindings, Lee Jones
  • Re: [PATCH v3 1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML, Rob Herring (Arm)
  • Re: [PATCH v3 1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML, Lee Jones
    • Re: [PATCH v3 1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML, Jonathan Cameron
    • Re: [PATCH v3 1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML, Alexandre Belloni
    • Re: [PATCH v3 1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML, Sebastian Reichel
  • Re: (subset) [PATCH v3 1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML, Lee Jones
• [PATCH] counter: ti-ecap-capture: Add check for clk_enable(), Jiasheng Jiang
  • Re: [PATCH] counter: ti-ecap-capture: Add check for clk_enable(), Julien Panis
  • Re: [PATCH] counter: ti-ecap-capture: Add check for clk_enable(), William Breathitt Gray
  • <Possible follow-ups>
  • Re: [PATCH] counter: ti-ecap-capture: Add check for clk_enable(), Jiasheng Jiang
• [PATCH] counter: stm32-timer-cnt: Add check for clk_enable(), Jiasheng Jiang
  • Re: [PATCH] counter: stm32-timer-cnt: Add check for clk_enable(), William Breathitt Gray
• [PATCH] iio: invensense: fix integer overflow while multiplication, Karan Sanghavi
  • Re: [PATCH] iio: invensense: fix integer overflow while multiplication, Jonathan Cameron
    • Re: [PATCH] iio: invensense: fix integer overflow while multiplication, Karan Sanghavi
      • Re: [PATCH] iio: invensense: fix integer overflow while multiplication, Jonathan Cameron
    • Re: [PATCH] iio: invensense: fix integer overflow while multiplication, Karan Sanghavi
• [PATCH v4 0/6] iio: light: stk3310: support powering off during suspend, Aren Moynihan
  • [PATCH v4 1/6] dt-bindings: iio: light: stk33xx: add vdd and leda regulators, Aren Moynihan
  • [PATCH v4 2/6] iio: light: stk3310: handle all remove logic with devm callbacks, Aren Moynihan
    • Re: [PATCH v4 2/6] iio: light: stk3310: handle all remove logic with devm callbacks, Jonathan Cameron
      • Re: [PATCH v4 2/6] iio: light: stk3310: handle all remove logic with devm callbacks, Aren
    • Re: [PATCH v4 2/6] iio: light: stk3310: handle all remove logic with devm callbacks, Andy Shevchenko
      • Re: [PATCH v4 2/6] iio: light: stk3310: handle all remove logic with devm callbacks, Aren
        • Re: [PATCH v4 2/6] iio: light: stk3310: handle all remove logic with devm callbacks, Andy Shevchenko
          • Re: [PATCH v4 2/6] iio: light: stk3310: handle all remove logic with devm callbacks, Aren
            • Re: [PATCH v4 2/6] iio: light: stk3310: handle all remove logic with devm callbacks, Andy Shevchenko
  • [PATCH v4 3/6] iio: light: stk3310: Implement vdd and leda supplies, Aren Moynihan
    • Re: [PATCH v4 3/6] iio: light: stk3310: Implement vdd and leda supplies, Jonathan Cameron
      • Re: [PATCH v4 3/6] iio: light: stk3310: Implement vdd and leda supplies, Aren
        • Re: [PATCH v4 3/6] iio: light: stk3310: Implement vdd and leda supplies, Andy Shevchenko
    • Re: [PATCH v4 3/6] iio: light: stk3310: Implement vdd and leda supplies, Andy Shevchenko
      • Re: [PATCH v4 3/6] iio: light: stk3310: Implement vdd and leda supplies, Aren
  • [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Aren Moynihan
    • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Andy Shevchenko
      • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Aren
        • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Andy Shevchenko
          • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Aren
            • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Andy Shevchenko
              • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Uwe Kleine-König
                • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Andy Shevchenko
                • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Nuno Sá
                • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Aren
                  • Re: [PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible, Jonathan Cameron
  • [PATCH v4 5/6] iio: light: stk3310: log error if reading the chip id fails, Aren Moynihan
    • Re: [PATCH v4 5/6] iio: light: stk3310: log error if reading the chip id fails, Andy Shevchenko
      • Re: [PATCH v4 5/6] iio: light: stk3310: log error if reading the chip id fails, Aren
  • [PATCH v4 6/6] arm64: dts: allwinner: pinephone: Add power supplies to stk3311, Aren Moynihan
• Re: [PATCH 26/44] iio: Switch to use hrtimer_setup(), Jonathan Cameron
• [PATCH v3 0/7]: iio: chemical: bme680: 2nd round of cleanup, Vasileios Amoiridis
  • [PATCH v3 1/7] iio: chemical: bme680: refactorize set_mode() mode, Vasileios Amoiridis
    • Re: [PATCH v3 1/7] iio: chemical: bme680: refactorize set_mode() mode, Jonathan Cameron
  • [PATCH v3 3/7] iio: chemical: bme680: Add triggered buffer support, Vasileios Amoiridis
    • Re: [PATCH v3 3/7] iio: chemical: bme680: Add triggered buffer support, Jonathan Cameron
  • [PATCH v3 2/7] iio: chemical: bme680: Add SCALE and RAW channels, Vasileios Amoiridis
    • Re: [PATCH v3 2/7] iio: chemical: bme680: Add SCALE and RAW channels, Jonathan Cameron
  • [PATCH v3 4/7] iio: chemical: bme680: Add support for preheat current, Vasileios Amoiridis
    • Re: [PATCH v3 4/7] iio: chemical: bme680: Add support for preheat current, Jonathan Cameron
  • [PATCH v3 6/7] iio: chemical: bme680: add regulators, Vasileios Amoiridis
  • [PATCH v3 5/7] dt-bindings: iio: bosch,bme680: Add supply properties, Vasileios Amoiridis
    • Re: [PATCH v3 5/7] dt-bindings: iio: bosch,bme680: Add supply properties, Jonathan Cameron
      • Re: [PATCH v3 5/7] dt-bindings: iio: bosch,bme680: Add supply properties, Krzysztof Kozlowski
        • Re: [PATCH v3 5/7] dt-bindings: iio: bosch,bme680: Add supply properties, Rob Herring
          • Re: [PATCH v3 5/7] dt-bindings: iio: bosch,bme680: Add supply properties, Vasileios Amoiridis
            • Re: [PATCH v3 5/7] dt-bindings: iio: bosch,bme680: Add supply properties, Rob Herring
  • [PATCH v3 7/7] iio: chemical: bme680: add power management, Vasileios Amoiridis
    • Re: [PATCH v3 7/7] iio: chemical: bme680: add power management, Jonathan Cameron
      • Re: [PATCH v3 7/7] iio: chemical: bme680: add power management, Vasileios Amoiridis
• [PATCH] iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name(), Zicheng Qu
  • Re: [PATCH] iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name(), Jonathan Cameron