Currently, both ata_dev_config_ncq_send_recv() - which checks for NCQ
Send/Recv Log (Log Address 13h) and ata_dev_config_ncq_non_data() -
which checks for NCQ Non-Data Log (Log Address 12h), uses the same
print when the log is not supported:
"NCQ Send/Recv Log not supported"
This seems like a copy paste error, since NCQ Non-Data Log is actually
a separate log.
Fix the print the reference the correct log.
Fixes: 284b3b77ea88 ("libata: NCQ encapsulation for ZAC MANAGEMENT OUT")
Signed-off-by: Niklas Cassel <cassel@xxxxxxxxxx>
---
drivers/ata/libata-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 193fc3942fd3a..e17e16706db70 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2274,7 +2274,7 @@ static void ata_dev_config_ncq_non_data(struct ata_device *dev)
if (!ata_log_supported(dev, ATA_LOG_NCQ_NON_DATA)) {
ata_dev_warn(dev,
- "NCQ Send/Recv Log not supported\n");
+ "NCQ Non-Data Log not supported\n");
return;
}
err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_NON_DATA,
--
2.48.1
