Hello Marek, On Tue, Feb 25, 2025 at 10:34:27AM +0100, Marek Szyprowski wrote: > with the $subject patch reverted: > > [ 0.938268] libata version 3.00 loaded. > [ 2.283918] ahci-dwc 122f0000.sata: supply ahci not found, using > dummy regulator > [ 2.290714] ahci-dwc 122f0000.sata: supply phy not found, using dummy > regulator > [ 2.298064] ahci-dwc 122f0000.sata: supply target not found, using > dummy regulator > [ 2.312275] ahci-dwc 122f0000.sata: forcing port_map 0x0 -> 0x1 > [ 2.316847] ahci-dwc 122f0000.sata: masking port_map 0x1 -> 0x1 > [ 2.322791] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command > slots, 6 Gbps, platform mode > [ 2.331464] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask > 0x1) > [ 2.338258] ahci-dwc 122f0000.sata: flags: ncq sntf pm led clo only > pmp pio slum part ccc apst > [ 2.359896] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] > port 0x100 irq 101 lpm-pol 0 > [ 2.687374] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.744673] ata1.00: HPA detected: current 117229295, native 117231408 > [ 2.757119] ata1.00: ATA-8: Corsair CSSD-F60GB2, 1.1, max UDMA/133 > [ 2.772062] ata1.00: 117229295 sectors, multi 1: LBA48 NCQ (depth 32) > [ 2.834520] ata1.00: configured for UDMA/133 Could you please test this patch: https://lore.kernel.org/linux-ide/20250225141612.942170-2-cassel@xxxxxxxxxx/T/#u and see if it helps. Kind regards, Niklas
