On Thu, 2025-02-06 at 10:34 +0900, Damien Le Moal wrote: > > Can you try this to see if it restores the probe for the second port: > > diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c > index 53b2c7719dc5..91d44302eac9 100644 > --- a/drivers/ata/libahci_platform.c > +++ b/drivers/ata/libahci_platform.c > @@ -651,8 +651,6 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, > * If no sub-node was found, keep this for device tree > * compatibility > */ > - hpriv->mask_port_map |= BIT(0); > - > rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node); > if (rc) > goto err_out; > > Yes, it does. 6.14.0-rc1 (plus patch above) bootlog ===================================== Feb 06 19:31:51 spare kernel: ahci-mvebu f10a8000.sata: AHCI vers 0001.0000, 32 command slots, 6 Gbps, platform mode Feb 06 19:31:51 spare kernel: ahci-mvebu f10a8000.sata: 2/2 ports implemented (port mask 0x3) Feb 06 19:31:51 spare kernel: ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs Feb 06 19:31:51 spare kernel: scsi host0: ahci-mvebu Feb 06 19:31:51 spare kernel: scsi host1: ahci-mvebu Feb 06 19:31:51 spare kernel: ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 40 lpm-pol 0 Feb 06 19:31:51 spare kernel: ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 40 lpm-pol 0 Tested-by: Klaus Kudielka <klaus.kudielka@xxxxxxxxx>
