Am 9. November 2024 18:29:44 MEZ schrieb Andrew Lunn <andrew@xxxxxxx>:
>On Sat, Nov 09, 2024 at 10:46:19AM +0100, Frank Wunderlich wrote:
>> From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
>>
>> after converting the ahci-platform binding to yaml the following files
>> reporting "'anyOf' conditional failed" on
>>
>> sata@540000: sata-port@0
>> diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
>> index 1e0ab35cc686..2b5e45d2c5a6 100644
>> --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
>> +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
>> @@ -214,6 +214,7 @@ &cp0_sata0 {
>>
>> sata-port@1 {
>> phys = <&cp0_comphy3 1>;
>> + status = "okay";
>> };
>> };
>
>>
>> diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
>> index 7af949092b91..6bdc4f1e6939 100644
>> --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
>> +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
>> @@ -433,11 +433,13 @@ &cp0_sata0 {
>> /* 7 + 12 SATA connector (J24) */
>> sata-port@0 {
>> phys = <&cp0_comphy2 0>;
>> + status = "okay";
>> };
>>
>> /* M.2-2250 B-key (J39) */
>> sata-port@1 {
>> phys = <&cp0_comphy3 1>;
>> + status = "okay";
>> };
>> };
>> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
>> index 7e595ac80043..161beec0b6b0 100644
>> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
>> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
>> @@ -347,10 +347,12 @@ CP11X_LABEL(sata0): sata@540000 {
>>
>> sata-port@0 {
>> reg = <0>;
>> + status = "disabled";
>> };
>
>I don't know the yaml too well, but it is not obvious how adding a few
>status = "disabled"; status = "okay"; fixes a "'anyOf' conditional failed".
>
>Maybe you can expand the explanation a bit?
>
> Andrew
Hi angelo,
I guess the dtbs_check only checks required properties from yaml if the node is enabled.
As you know, phys that can supply different types (sata,usb,pcie,*gmii,...),but only one mode can be used per phy. So only one controller can be used with it,the other(s) can not. I do not know marvell,but there are similar in mediatek (xsphy) and rockchip (combphy).
