Correctly spelled comments make it easier for the reader to understand the code. Fix typos: 'multipe' ==> 'multiple', 'Paremeters' ==> 'Parameters', 'recieved' ==> 'received', 'realted' ==> 'related', 'evaulated' ==> 'evaluated', 'programing' ==> 'programming', 'coninue' ==> 'continue'. Signed-off-by: Yan Zhen <yanzhen@xxxxxxxx> --- v3: * Although v1 has been reviewed, some of the fixes in the description were not reflected in the source file, so part of the description was deleted. v2: https://lore.kernel.org/all/b4a9e472-e2db-4115-99f2-4d1b702cfc46@xxxxxxxx/ v1: https://lore.kernel.org/all/a5e93c28-bb7b-fdca-fd6b-a44eb3454980@xxxxxx/ drivers/ata/ahci.c | 2 +- drivers/ata/ahci_imx.c | 2 +- drivers/ata/ahci_xgene.c | 2 +- drivers/ata/libata-acpi.c | 4 ++-- drivers/ata/pata_it8213.c | 2 +- drivers/ata/pata_octeon_cf.c | 2 +- drivers/ata/pata_oldpiix.c | 2 +- drivers/ata/pata_radisys.c | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 45f63b09828a..2d3d3d67b4d9 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1676,7 +1676,7 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports, /* * If number of MSIs is less than number of ports then Sharing Last * Message mode could be enforced. In this case assume that advantage - * of multipe MSIs is negated and use single MSI mode instead. + * of multiple MSIs is negated and use single MSI mode instead. */ if (n_ports > 1) { nvec = pci_alloc_irq_vectors(pdev, n_ports, INT_MAX, diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 6f955e9105e8..357aba1d5929 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -511,7 +511,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv) if (imxpriv->type == AHCI_IMX6Q || imxpriv->type == AHCI_IMX6QP) { /* - * set PHY Paremeters, two steps to configure the GPR13, + * set PHY Parameters, two steps to configure the GPR13, * one write for rest of parameters, mask of first write * is 0x07ffffff, and the other one write for setting * the mpll_clk_en. diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c index 81a1d838c0fc..7e6b4db8a1c2 100644 --- a/drivers/ata/ahci_xgene.c +++ b/drivers/ata/ahci_xgene.c @@ -534,7 +534,7 @@ static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class, /** * xgene_ahci_handle_broken_edge_irq - Handle the broken irq. - * @host: Host that recieved the irq + * @host: Host that received the irq * @irq_masked: HOST_IRQ_STAT value * * For hardware with broken edge trigger latch diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index d36e71f475ab..b7f0bf795521 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -86,7 +86,7 @@ static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev) * @dev: ATA device ACPI event occurred (can be NULL) * @event: ACPI event which occurred * - * All ACPI bay / device realted events end up in this function. If + * All ACPI bay / device related events end up in this function. If * the event is port-wide @dev is NULL. If the event is specific to a * device, @dev points to it. * @@ -832,7 +832,7 @@ void ata_acpi_on_resume(struct ata_port *ap) dev->flags |= ATA_DFLAG_ACPI_PENDING; } } else { - /* SATA _GTF needs to be evaulated after _SDD and + /* SATA _GTF needs to be evaluated after _SDD and * there's no reason to evaluate IDE _GTF early * without _STM. Clear cache and schedule _GTF. */ diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index b7ac56103c8a..9cbe2132ce59 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -81,7 +81,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) int control = 0; /* - * See Intel Document 298600-004 for the timing programing rules + * See Intel Document 298600-004 for the timing programming rules * for PIIX/ICH. The 8213 is a clone so very similar */ diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index 0bb9607e7348..dce24806a052 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -183,7 +183,7 @@ static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev) reg_tim.s.ale = 0; /* Not used */ reg_tim.s.page = 0; - /* Time after IORDY to coninue to assert the data */ + /* Time after IORDY to continue to assert the data */ reg_tim.s.wait = 0; /* Time to wait to complete the cycle. */ reg_tim.s.pause = pause; diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index dca82d92b004..3d01b7000e41 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -70,7 +70,7 @@ static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev) int control = 0; /* - * See Intel Document 298600-004 for the timing programing rules + * See Intel Document 298600-004 for the timing programming rules * for PIIX/ICH. Note that the early PIIX does not have the slave * timing port at 0x44. */ diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 84b001097093..40ef8072c159 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -45,7 +45,7 @@ static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev) int control = 0; /* - * See Intel Document 298600-004 for the timing programing rules + * See Intel Document 298600-004 for the timing programming rules * for PIIX/ICH. Note that the early PIIX does not have the slave * timing port at 0x44. The Radisys is a relative of the PIIX * but not the same so be careful. -- 2.34.1