Export libata NCQ Priority configuration helpers to be reused
for libsas managed SATA devices.
Switched locking from spin_lock_irq() to spin_lock_irqsave().
In the future someone might call these helper functions when interrupts
are disabled. spin_unlock_irq() could lead to a premature re-enabling
of interrupts, whereas spin_unlock_irqrestore() restores the interrupt
state to its condition prior to the spin_lock_irqsave() call.
Acked-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
Reviewed-by: Jason Yan <yanaijie@xxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx>
---
drivers/ata/libata-sata.c | 160 +++++++++++++++++++++++++++++---------
include/linux/libata.h | 6 ++
2 files changed, 128 insertions(+), 38 deletions(-)
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 0fb1934875f2..a8d773003d74 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -848,80 +848,143 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
ata_scsi_lpm_show, ata_scsi_lpm_store);
EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
-static ssize_t ata_ncq_prio_supported_show(struct device *device,
- struct device_attribute *attr,
- char *buf)
+/**
+ * ata_ncq_prio_supported - Check if device supports NCQ Priority
+ * @ap: ATA port of the target device
+ * @sdev: SCSI device
+ * @supported: Address of a boolean to store the result
+ *
+ * Helper to check if device supports NCQ Priority feature.
+ *
+ * Context: Any context. Takes and releases @ap->lock.
+ *
+ * Return:
+ * * %0 - OK. Status is stored into @supported
+ * * %-ENODEV - Failed to find the ATA device
+ */
+int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev,
+ bool *supported)
{
- struct scsi_device *sdev = to_scsi_device(device);
- struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
- bool ncq_prio_supported;
+ unsigned long flags;
int rc = 0;
- spin_lock_irq(ap->lock);
+ spin_lock_irqsave(ap->lock, flags);
dev = ata_scsi_find_dev(ap, sdev);
if (!dev)
rc = -ENODEV;
else
- ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
- spin_unlock_irq(ap->lock);
+ *supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_supported);
+
+static ssize_t ata_ncq_prio_supported_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(device);
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ bool supported;
+ int rc;
+
+ rc = ata_ncq_prio_supported(ap, sdev, &supported);
+ if (rc)
+ return rc;
- return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
+ return sysfs_emit(buf, "%d\n", supported);
}
DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
-static ssize_t ata_ncq_prio_enable_show(struct device *device,
- struct device_attribute *attr,
- char *buf)
+/**
+ * ata_ncq_prio_enabled - Check if NCQ Priority is enabled
+ * @ap: ATA port of the target device
+ * @sdev: SCSI device
+ * @enabled: Address of a boolean to store the result
+ *
+ * Helper to check if NCQ Priority feature is enabled.
+ *
+ * Context: Any context. Takes and releases @ap->lock.
+ *
+ * Return:
+ * * %0 - OK. Status is stored into @enabled
+ * * %-ENODEV - Failed to find the ATA device
+ */
+int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev,
+ bool *enabled)
{
- struct scsi_device *sdev = to_scsi_device(device);
- struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
- bool ncq_prio_enable;
+ unsigned long flags;
int rc = 0;
- spin_lock_irq(ap->lock);
+ spin_lock_irqsave(ap->lock, flags);
dev = ata_scsi_find_dev(ap, sdev);
if (!dev)
rc = -ENODEV;
else
- ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
- spin_unlock_irq(ap->lock);
+ *enabled = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
+ spin_unlock_irqrestore(ap->lock, flags);
- return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable);
+ return rc;
}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled);
-static ssize_t ata_ncq_prio_enable_store(struct device *device,
- struct device_attribute *attr,
- const char *buf, size_t len)
+static ssize_t ata_ncq_prio_enable_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
{
struct scsi_device *sdev = to_scsi_device(device);
- struct ata_port *ap;
- struct ata_device *dev;
- long int input;
- int rc = 0;
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ bool enabled;
+ int rc;
- rc = kstrtol(buf, 10, &input);
+ rc = ata_ncq_prio_enabled(ap, sdev, &enabled);
if (rc)
return rc;
- if ((input < 0) || (input > 1))
- return -EINVAL;
- ap = ata_shost_to_port(sdev->host);
- dev = ata_scsi_find_dev(ap, sdev);
- if (unlikely(!dev))
- return -ENODEV;
+ return sysfs_emit(buf, "%d\n", enabled);
+}
+
+/**
+ * ata_ncq_prio_enable - Enable/disable NCQ Priority
+ * @ap: ATA port of the target device
+ * @sdev: SCSI device
+ * @enable: true - enable NCQ Priority, false - disable NCQ Priority
+ *
+ * Helper to enable/disable NCQ Priority feature.
+ *
+ * Context: Any context. Takes and releases @ap->lock.
+ *
+ * Return:
+ * * %0 - OK. Status is stored into @enabled
+ * * %-ENODEV - Failed to find the ATA device
+ * * %-EINVAL - NCQ Priority is not supported or CDL is enabled
+ */
+int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev,
+ bool enable)
+{
+ struct ata_device *dev;
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(ap->lock, flags);
- spin_lock_irq(ap->lock);
+ dev = ata_scsi_find_dev(ap, sdev);
+ if (!dev) {
+ rc = -ENODEV;
+ goto unlock;
+ }
if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
rc = -EINVAL;
goto unlock;
}
- if (input) {
+ if (enable) {
if (dev->flags & ATA_DFLAG_CDL_ENABLED) {
ata_dev_err(dev,
"CDL must be disabled to enable NCQ priority\n");
@@ -934,9 +997,30 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,
}
unlock:
- spin_unlock_irq(ap->lock);
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enable);
+
+static ssize_t ata_ncq_prio_enable_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct scsi_device *sdev = to_scsi_device(device);
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ bool enable;
+ int rc;
+
+ rc = kstrtobool(buf, &enable);
+ if (rc)
+ return rc;
+
+ rc = ata_ncq_prio_enable(ap, sdev, enable);
+ if (rc)
+ return rc;
- return rc ? rc : len;
+ return len;
}
DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 26d68115afb8..6dd9a4f9ca7c 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1157,6 +1157,12 @@ extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
int queue_depth);
+extern int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev,
+ bool *supported);
+extern int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev,
+ bool *enabled);
+extern int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev,
+ bool enable);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
--
2.44.0.278.ge034bb2e1d-goog
