On Tue, Mar 05, 2024 at 08:37:53AM +0900, Damien Le Moal wrote:
> On 3/5/24 07:08, Igor Pylypiv wrote:
> > Libata sysfs attributes cannot be used for libsas managed SATA devices
> > because the ata_port location is different for libsas.
> >
> > Defined sysfs attributes (visible for SATA devices only):
> > - /sys/block/sda/device/ncq_prio_enable
> > - /sys/block/sda/device/ncq_prio_supported
> >
> > The newly defined attributes will pass the correct ata_port to libata
> > helper functions.
> >
> > Reviewed-by: John Garry <john.g.garry@xxxxxxxxxx>
> > Signed-off-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx>
> > ---
> > drivers/scsi/libsas/sas_ata.c | 94 +++++++++++++++++++++++++++++++++++
> > include/scsi/sas_ata.h | 6 +++
> > 2 files changed, 100 insertions(+)
> >
> > diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
> > index 12e2653846e3..4ecdfa2a12c3 100644
> > --- a/drivers/scsi/libsas/sas_ata.c
> > +++ b/drivers/scsi/libsas/sas_ata.c
> > @@ -964,3 +964,97 @@ int sas_execute_ata_cmd(struct domain_device *device, u8 *fis, int force_phy_id)
> > force_phy_id, &tmf_task);
> > }
> > EXPORT_SYMBOL_GPL(sas_execute_ata_cmd);
> > +
> > +static ssize_t sas_ncq_prio_supported_show(struct device *device,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct scsi_device *sdev = to_scsi_device(device);
> > + struct domain_device *ddev = sdev_to_domain_dev(sdev);
> > + bool supported;
> > + int rc;
> > +
> > + /* This attribute shall be visible for SATA devices only */
> > + if (WARN_ON(!dev_is_sata(ddev)))
>
> WARN_ON_ONCE() please. Same comment for all the occurences of this check.
Updated in v5. Thank you, Damien!
>
> With that, looks good to me.
>
> Reviewed-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
>
> --
> Damien Le Moal
> Western Digital Research
>
