When ISR handle interface fatal error with error recovery after clear PxIS
and PxIE. Another FIS(SDB FIS with err) that set PxIS.IFS to 1 is recevied
during error recovery, which causing the HBA not issue any new commands
after cmd.ST set 1.
Signed-off-by: Szuying Chen <Chloe_Chen@xxxxxxxxxxxxxx>
---
drivers/ata/libahci.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 06aec35f88f2..0ae51fd95d46 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -679,9 +679,21 @@ static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
void ahci_start_engine(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
+ /* clear SError */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ /* clear port IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+ writel(1 << ap->port_no, hpriv->mmio + PORT_IRQ_STAT);
+
/* start DMA */
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_START;
--
2.39.2
