In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxxxx>
Acked-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
---
drivers/ata/Kconfig | 28 ++++++++++++++--------------
drivers/ata/libata-sff.c | 4 ++++
2 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 42b51c9812a0..c521cdc51f8c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -557,7 +557,7 @@ comment "PATA SFF controllers with BMDMA"
config PATA_ALI
tristate "ALi PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for the ALi ATA interfaces
@@ -567,7 +567,7 @@ config PATA_ALI
config PATA_AMD
tristate "AMD/NVidia PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for the AMD and NVidia PATA
@@ -585,7 +585,7 @@ config PATA_ARASAN_CF
config PATA_ARTOP
tristate "ARTOP 6210/6260 PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for ARTOP PATA controllers.
@@ -612,7 +612,7 @@ config PATA_ATP867X
config PATA_CMD64X
tristate "CMD64x PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for the CMD64x series chips
@@ -659,7 +659,7 @@ config PATA_CS5536
config PATA_CYPRESS
tristate "Cypress CY82C693 PATA support (Very Experimental)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for the Cypress/Contaq CY82C693
@@ -707,7 +707,7 @@ config PATA_HPT366
config PATA_HPT37X
tristate "HPT 370/370A/371/372/374/302 PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the majority of the later HPT
PATA controllers via the new ATA layer.
@@ -716,7 +716,7 @@ config PATA_HPT37X
config PATA_HPT3X2N
tristate "HPT 371N/372N/302N PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the N variant HPT PATA
controllers via the new ATA layer.
@@ -819,7 +819,7 @@ config PATA_MPC52xx
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the Netcell Revolution RAID
PATA controller.
@@ -855,7 +855,7 @@ config PATA_OLDPIIX
config PATA_OPTIDMA
tristate "OPTI FireStar PATA support (Very Experimental)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables DMA/PIO support for the later OPTi
controllers found on some old motherboards and in some
@@ -865,7 +865,7 @@ config PATA_OPTIDMA
config PATA_PDC2027X
tristate "Promise PATA 2027x support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
@@ -873,7 +873,7 @@ config PATA_PDC2027X
config PATA_PDC_OLD
tristate "Older Promise PATA controller support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters.
@@ -901,7 +901,7 @@ config PATA_RDC
config PATA_SC1200
tristate "SC1200 PATA support"
- depends on PCI && (X86_32 || COMPILE_TEST)
+ depends on PCI && (X86_32 || COMPILE_TEST) && HAS_IOPORT
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
@@ -919,7 +919,7 @@ config PATA_SCH
config PATA_SERVERWORKS
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the Serverworks OSB4/CSB5/CSB6 and
HT1000 PATA controllers, via the new ATA layer.
@@ -1183,7 +1183,7 @@ config ATA_GENERIC
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
- depends on (ISA || PCI)
+ depends on (ISA || PCI) && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for ISA/VLB/PCI bus legacy PATA
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 9d28badfe41d..c8cb7ed28f83 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3042,6 +3042,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
*/
int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
{
+#ifdef CONFIG_HAS_IOPORT
unsigned long bmdma = pci_resource_start(pdev, 4);
u8 simplex;
@@ -3054,6 +3055,9 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
if (simplex & 0x80)
return -EOPNOTSUPP;
return 0;
+#else
+ return -ENOENT;
+#endif /* CONFIG_HAS_IOPORT */
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
--
2.39.2
