Fix indentation and coding style in the frpw pata parport protocol module to suppress smatch warnings such as: drivers/ata/pata_parport/frpw.c:234 frpw_test_proto() warn: inconsistent indenting Reported-by: kernel test robot <lkp@xxxxxxxxx> Link: https://lore.kernel.org/oe-kbuild-all/202305061212.EPgEMLXl-lkp@xxxxxxxxx/ Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx> --- drivers/ata/pata_parport/frpw.c | 310 +++++++++++++++++--------------- 1 file changed, 162 insertions(+), 148 deletions(-) diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c index 3ec0abf16fa6..a644aa7f18b0 100644 --- a/drivers/ata/pata_parport/frpw.c +++ b/drivers/ata/pata_parport/frpw.c @@ -1,17 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* - frpw.c (c) 1996-8 Grant R. Guenther <grant@xxxxxxxxxx> - Under the terms of the GNU General Public License - - frpw.c is a low-level protocol driver for the Freecom "Power" - parallel port IDE adapter. - - Some applications of this adapter may require a "printer" reset - prior to loading the driver. This can be done by loading and - unloading the "lp" driver, or it can be done by this driver - if you define FRPW_HARD_RESET. The latter is not recommended - as it may upset devices on other ports. - -*/ + * (c) 1996-1998 Grant R. Guenther <grant@xxxxxxxxxx> + * + * frpw.c is a low-level protocol driver for the Freecom "Power" parallel port + * IDE adapter. + * + * Some applications of this adapter may require a "printer" reset prior to + * loading the driver. This can be done by loading and unloading the "lp" + * driver, or it can be done by this driver if you define FRPW_HARD_RESET. + * The latter is not recommended as it may upset devices on other ports. + */ #include <linux/module.h> #include <linux/init.h> @@ -25,15 +23,15 @@ #define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4); #define j44(l,h) (((l>>4)&0x0f)|(h&0xf0)) -/* cont = 0 - access the IDE register file - cont = 1 - access the IDE command set -*/ - +/* + * cont = 0 - access the IDE register file + * cont = 1 - access the IDE command set + */ static int cont_map[2] = { 0x08, 0x10 }; static int frpw_read_regr(struct pi_adapter *pi, int cont, int regr) - -{ int h,l,r; +{ + int h, l, r; r = regr + cont_map[cont]; @@ -43,143 +41,154 @@ static int frpw_read_regr(struct pi_adapter *pi, int cont, int regr) w2(4); h = r1(); w2(4); - return j44(l,h); - + return j44(l, h); } static void frpw_write_regr(struct pi_adapter *pi, int cont, int regr, int val) - -{ int r; - - r = regr + cont_map[cont]; +{ + int r = regr + cont_map[cont]; w2(4); w0(r); cec4; w0(val); - w2(5);w2(7);w2(5);w2(4); + w2(5); w2(7); w2(5); w2(4); } -static void frpw_read_block_int(struct pi_adapter *pi, char *buf, int count, int regr) - -{ int h, l, k, ph; - - switch(pi->mode) { - - case 0: w2(4); w0(regr); cec4; - for (k=0;k<count;k++) { - w2(6); l = r1(); - w2(4); h = r1(); - buf[k] = j44(l,h); - } - w2(4); - break; - - case 1: ph = 2; - w2(4); w0(regr + 0xc0); cec4; - w0(0xff); - for (k=0;k<count;k++) { - w2(0xa4 + ph); - buf[k] = r0(); - ph = 2 - ph; - } - w2(0xac); w2(0xa4); w2(4); - break; - - case 2: w2(4); w0(regr + 0x80); cec4; - for (k=0;k<count;k++) buf[k] = r4(); - w2(0xac); w2(0xa4); - w2(4); - break; - - case 3: w2(4); w0(regr + 0x80); cec4; - for (k=0;k<count-2;k++) buf[k] = r4(); +static void frpw_read_block_int(struct pi_adapter *pi, char *buf, int count, + int regr) +{ + int h, l, k, ph; + + switch (pi->mode) { + case 0: + w2(4); w0(regr); cec4; + for (k = 0; k < count; k++) { + w2(6); l = r1(); + w2(4); h = r1(); + buf[k] = j44(l, h); + } + w2(4); + break; + + case 1: + ph = 2; + w2(4); w0(regr + 0xc0); cec4; + w0(0xff); + for (k = 0; k < count; k++) { + w2(0xa4 + ph); + buf[k] = r0(); + ph = 2 - ph; + } + w2(0xac); w2(0xa4); w2(4); + break; + + case 2: + w2(4); w0(regr + 0x80); cec4; + for (k = 0; k < count; k++) + buf[k] = r4(); w2(0xac); w2(0xa4); - buf[count-2] = r4(); - buf[count-1] = r4(); w2(4); break; - case 4: w2(4); w0(regr + 0x80); cec4; - for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w(); - w2(0xac); w2(0xa4); - buf[count-2] = r4(); - buf[count-1] = r4(); - w2(4); - break; - - case 5: w2(4); w0(regr + 0x80); cec4; - for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l(); - buf[count-4] = r4(); - buf[count-3] = r4(); - w2(0xac); w2(0xa4); - buf[count-2] = r4(); - buf[count-1] = r4(); - w2(4); - break; + case 3: + w2(4); w0(regr + 0x80); cec4; + for (k = 0; k < count - 2; k++) + buf[k] = r4(); + w2(0xac); w2(0xa4); + buf[count - 2] = r4(); + buf[count - 1] = r4(); + w2(4); + break; + + case 4: + w2(4); w0(regr + 0x80); cec4; + for (k = 0; k < count / 2 - 1; k++) + ((u16 *)buf)[k] = r4w(); + w2(0xac); w2(0xa4); + buf[count - 2] = r4(); + buf[count - 1] = r4(); + w2(4); + break; + case 5: + w2(4); w0(regr + 0x80); cec4; + for (k = 0; k < count / 4 - 1; k++) + ((u32 *)buf)[k] = r4l(); + buf[count - 4] = r4(); + buf[count - 3] = r4(); + w2(0xac); w2(0xa4); + buf[count - 2] = r4(); + buf[count - 1] = r4(); + w2(4); + break; } } static void frpw_read_block(struct pi_adapter *pi, char *buf, int count) - -{ frpw_read_block_int(pi,buf,count,0x08); +{ + frpw_read_block_int(pi, buf, count, 0x08); } static void frpw_write_block(struct pi_adapter *pi, char *buf, int count) - -{ int k; - - switch(pi->mode) { +{ + int k; + switch (pi->mode) { case 0: case 1: - case 2: w2(4); w0(8); cec4; w2(5); - for (k=0;k<count;k++) { + case 2: + w2(4); w0(8); cec4; w2(5); + for (k = 0; k < count; k++) { w0(buf[k]); - w2(7);w2(5); + w2(7); w2(5); } w2(4); break; - case 3: w2(4); w0(0xc8); cec4; w2(5); - for (k=0;k<count;k++) w4(buf[k]); + case 3: + w2(4); w0(0xc8); cec4; w2(5); + for (k = 0; k < count; k++) + w4(buf[k]); w2(4); break; - case 4: w2(4); w0(0xc8); cec4; w2(5); - for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); - w2(4); - break; + case 4: + w2(4); w0(0xc8); cec4; w2(5); + for (k = 0; k < count / 2; k++) + w4w(((u16 *)buf)[k]); + w2(4); + break; - case 5: w2(4); w0(0xc8); cec4; w2(5); - for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); - w2(4); - break; + case 5: + w2(4); w0(0xc8); cec4; w2(5); + for (k = 0; k < count / 4; k++) + w4l(((u32 *)buf)[k]); + w2(4); + break; } } static void frpw_connect(struct pi_adapter *pi) - -{ pi->saved_r0 = r0(); - pi->saved_r2 = r2(); +{ + pi->saved_r0 = r0(); + pi->saved_r2 = r2(); w2(4); } static void frpw_disconnect(struct pi_adapter *pi) - -{ w2(4); w0(0x20); cec4; +{ + w2(4); w0(0x20); cec4; w0(pi->saved_r0); - w2(pi->saved_r2); + w2(pi->saved_r2); } -/* Stub logic to see if PNP string is available - used to distinguish - between the Xilinx and ASIC implementations of the Freecom adapter. -*/ - +/* + * Stub logic to see if PNP string is available - used to distinguish + * between the Xilinx and ASIC implementations of the Freecom adapter. + * returns chip_type: 0 = Xilinx, 1 = ASIC + */ static int frpw_test_pnp(struct pi_adapter *pi) - -/* returns chip_type: 0 = Xilinx, 1 = ASIC */ - -{ int olddelay, a, b; +{ + int olddelay, a, b; #ifdef FRPW_HARD_RESET w0(0); w2(8); udelay(50); w2(0xc); /* parallel bus reset */ @@ -200,65 +209,70 @@ static int frpw_test_pnp(struct pi_adapter *pi) w0(pi->saved_r0); w2(pi->saved_r2); - return ((~a&0x40) && (b&0x40)); + return ((~a & 0x40) && (b & 0x40)); } -/* We use the pi->private to remember the result of the PNP test. - To make this work, private = port*2 + chip. Yes, I know it's - a hack :-( -*/ - +/* + * We use the pi->private to remember the result of the PNP test. + * To make this work, private = port*2 + chip. Yes, I know it's a hack :-( + */ static int frpw_test_proto(struct pi_adapter *pi) - -{ int j, k, r; - int e[2] = {0,0}; +{ + int j, k, r; + int e[2] = { 0, 0 }; char scratch[512]; - if ((pi->private>>1) != pi->port) - pi->private = frpw_test_pnp(pi) + 2*pi->port; + if ((pi->private >> 1) != pi->port) + pi->private = frpw_test_pnp(pi) + 2*pi->port; - if (((pi->private%2) == 0) && (pi->mode > 2)) { - dev_dbg(&pi->dev, "frpw: Xilinx does not support mode %d\n", pi->mode); - return 1; + if (((pi->private & 0x1) == 0) && (pi->mode > 2)) { + dev_dbg(&pi->dev, + "frpw: Xilinx does not support mode %d\n", pi->mode); + return 1; } - if (((pi->private%2) == 1) && (pi->mode == 2)) { + if (((pi->private & 0x1) == 1) && (pi->mode == 2)) { dev_dbg(&pi->dev, "frpw: ASIC does not support mode 2\n"); - return 1; + return 1; } frpw_connect(pi); - for (j=0;j<2;j++) { - frpw_write_regr(pi,0,6,0xa0+j*0x10); - for (k=0;k<256;k++) { - frpw_write_regr(pi,0,2,k^0xaa); - frpw_write_regr(pi,0,3,k^0x55); - if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++; - } - } + for (j = 0; j < 2; j++) { + frpw_write_regr(pi, 0, 6, 0xa0 + j * 0x10); + for (k = 0; k < 256; k++) { + frpw_write_regr(pi, 0, 2, k ^ 0xaa); + frpw_write_regr(pi, 0, 3, k ^ 0x55); + if (frpw_read_regr(pi, 0, 2) != (k ^ 0xaa)) + e[j]++; + } + } frpw_disconnect(pi); frpw_connect(pi); - frpw_read_block_int(pi,scratch,512,0x10); - r = 0; - for (k=0;k<128;k++) if (scratch[k] != k) r++; + frpw_read_block_int(pi, scratch, 512, 0x10); + r = 0; + for (k = 0; k < 128; k++) { + if (scratch[k] != k) + r++; + } frpw_disconnect(pi); - dev_dbg(&pi->dev, "frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n", - pi->port, (pi->private%2), pi->mode, e[0], e[1], r); + dev_dbg(&pi->dev, + "frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n", + pi->port, (pi->private%2), pi->mode, e[0], e[1], r); - return (r || (e[0] && e[1])); + return r || (e[0] && e[1]); } - static void frpw_log_adapter(struct pi_adapter *pi) -{ char *mode_string[6] = {"4-bit","8-bit","EPP", - "EPP-8","EPP-16","EPP-32"}; +{ + char *mode[6] = { "4-bit", "8-bit", "EPP", "EPP-8", "EPP-16", "EPP-32"}; - dev_info(&pi->dev, "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n", - ((pi->private % 2) == 0) ? "Xilinx" : "ASIC", - pi->port, pi->mode, mode_string[pi->mode], pi->delay); + dev_info(&pi->dev, + "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n", + ((pi->private & 0x1) == 0) ? "Xilinx" : "ASIC", + pi->port, pi->mode, mode[pi->mode], pi->delay); } static struct pi_protocol frpw = { -- 2.40.1
