[PATCH v5 10/19] scsi: sd: set read/write commands CDL index

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>

Introduce the command duration limits helper function sd_cdl_dld() to
set the DLD bits of READ/WRITE 16 and READ/WRITE 32 commands to
indicate to the device the command duration limit descriptor to apply
to the commands.

When command duration limits are enabled, sd_cdl_dld() obtains the
index of the descriptor to apply to the command using the hints field of
the request IO priority value (hints IOPRIO_HINT_DEV_DURATION_LIMIT_1 to
IOPRIO_HINT_DEV_DURATION_LIMIT_7).

If command duration limits is disabled (which is the default), the limit
index "0" is always used to indicate "no limit" for a command.

Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Co-developed-by: Niklas Cassel <niklas.cassel@xxxxxxx>
Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxx>
---
 drivers/scsi/sd.c | 40 ++++++++++++++++++++++++++++++++++------
 1 file changed, 34 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2dc4223a4c97..c265b8cf2890 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1042,13 +1042,14 @@ static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
 
 static blk_status_t sd_setup_rw32_cmnd(struct scsi_cmnd *cmd, bool write,
 				       sector_t lba, unsigned int nr_blocks,
-				       unsigned char flags)
+				       unsigned char flags, unsigned int dld)
 {
 	cmd->cmd_len = SD_EXT_CDB_SIZE;
 	cmd->cmnd[0]  = VARIABLE_LENGTH_CMD;
 	cmd->cmnd[7]  = 0x18; /* Additional CDB len */
 	cmd->cmnd[9]  = write ? WRITE_32 : READ_32;
 	cmd->cmnd[10] = flags;
+	cmd->cmnd[11] = dld & 0x07;
 	put_unaligned_be64(lba, &cmd->cmnd[12]);
 	put_unaligned_be32(lba, &cmd->cmnd[20]); /* Expected Indirect LBA */
 	put_unaligned_be32(nr_blocks, &cmd->cmnd[28]);
@@ -1058,12 +1059,12 @@ static blk_status_t sd_setup_rw32_cmnd(struct scsi_cmnd *cmd, bool write,
 
 static blk_status_t sd_setup_rw16_cmnd(struct scsi_cmnd *cmd, bool write,
 				       sector_t lba, unsigned int nr_blocks,
-				       unsigned char flags)
+				       unsigned char flags, unsigned int dld)
 {
 	cmd->cmd_len  = 16;
 	cmd->cmnd[0]  = write ? WRITE_16 : READ_16;
-	cmd->cmnd[1]  = flags;
-	cmd->cmnd[14] = 0;
+	cmd->cmnd[1]  = flags | ((dld >> 2) & 0x01);
+	cmd->cmnd[14] = (dld & 0x03) << 6;
 	cmd->cmnd[15] = 0;
 	put_unaligned_be64(lba, &cmd->cmnd[2]);
 	put_unaligned_be32(nr_blocks, &cmd->cmnd[10]);
@@ -1115,6 +1116,31 @@ static blk_status_t sd_setup_rw6_cmnd(struct scsi_cmnd *cmd, bool write,
 	return BLK_STS_OK;
 }
 
+/*
+ * Check if a command has a duration limit set. If it does, and the target
+ * device supports CDL and the feature is enabled, return the limit
+ * descriptor index to use. Return 0 (no limit) otherwise.
+ */
+static int sd_cdl_dld(struct scsi_disk *sdkp, struct scsi_cmnd *scmd)
+{
+	struct scsi_device *sdp = sdkp->device;
+	int hint;
+
+	if (!sdp->cdl_supported || !sdp->cdl_enable)
+		return 0;
+
+	/*
+	 * Use "no limit" if the request ioprio does not specify a duration
+	 * limit hint.
+	 */
+	hint = IOPRIO_PRIO_HINT(req_get_ioprio(scsi_cmd_to_rq(scmd)));
+	if (hint < IOPRIO_HINT_DEV_DURATION_LIMIT_1 ||
+	    hint > IOPRIO_HINT_DEV_DURATION_LIMIT_7)
+		return 0;
+
+	return (hint - IOPRIO_HINT_DEV_DURATION_LIMIT_1) + 1;
+}
+
 static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 {
 	struct request *rq = scsi_cmd_to_rq(cmd);
@@ -1126,6 +1152,7 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 	unsigned int mask = logical_to_sectors(sdp, 1) - 1;
 	bool write = rq_data_dir(rq) == WRITE;
 	unsigned char protect, fua;
+	unsigned int dld;
 	blk_status_t ret;
 	unsigned int dif;
 	bool dix;
@@ -1175,6 +1202,7 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 	fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0;
 	dix = scsi_prot_sg_count(cmd);
 	dif = scsi_host_dif_capable(cmd->device->host, sdkp->protection_type);
+	dld = sd_cdl_dld(sdkp, cmd);
 
 	if (dif || dix)
 		protect = sd_setup_protect_cmnd(cmd, dix, dif);
@@ -1183,10 +1211,10 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 
 	if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) {
 		ret = sd_setup_rw32_cmnd(cmd, write, lba, nr_blocks,
-					 protect | fua);
+					 protect | fua, dld);
 	} else if (sdp->use_16_for_rw || (nr_blocks > 0xffff)) {
 		ret = sd_setup_rw16_cmnd(cmd, write, lba, nr_blocks,
-					 protect | fua);
+					 protect | fua, dld);
 	} else if ((nr_blocks > 0xff) || (lba > 0x1fffff) ||
 		   sdp->use_10_for_rw || protect) {
 		ret = sd_setup_rw10_cmnd(cmd, write, lba, nr_blocks,
-- 
2.39.2




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux