[PATCH 30/32] pata_parport-bpck6: move defines and mode_map to bpck6.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move all register definitions and mode_map to bpck6.c

Signed-off-by: Ondrej Zary <linux@xxxxxxx>
---
 drivers/ata/pata_parport/bpck6.c   | 44 ++++++++++++++++++++++++
 drivers/ata/pata_parport/ppc6lnx.c | 54 ------------------------------
 2 files changed, 44 insertions(+), 54 deletions(-)

diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index f6d0916577b3..0ed6a97ab04f 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -19,6 +19,50 @@
 #include "pata_parport.h"
 #include "ppc6lnx.c"
 
+/* 60772 Commands */
+#define ACCESS_REG		0x00
+#define ACCESS_PORT		0x40
+
+#define ACCESS_READ		0x00
+#define ACCESS_WRITE		0x20
+
+/* 60772 Command Prefix */
+#define CMD_PREFIX_SET		0xe0	// Special command that modifies next command's operation
+#define CMD_PREFIX_RESET	0xc0	// Resets current cmd modifier reg bits
+ #define PREFIX_IO16		0x01	// perform 16-bit wide I/O
+ #define PREFIX_FASTWR		0x04	// enable PPC mode fast-write
+ #define PREFIX_BLK		0x08	// enable block transfer mode
+
+/* 60772 Registers */
+#define REG_STATUS		0x00	// status register
+ #define STATUS_IRQA		0x01	// Peripheral IRQA line
+ #define STATUS_EEPROM_DO	0x40	// Serial EEPROM data bit
+#define REG_VERSION		0x01	// PPC version register (read)
+#define REG_HWCFG		0x02	// Hardware Config register
+#define REG_RAMSIZE		0x03	// Size of RAM Buffer
+ #define RAMSIZE_128K		0x02
+#define REG_EEPROM		0x06	// EEPROM control register
+ #define EEPROM_SK		0x01	// eeprom SK bit
+ #define EEPROM_DI		0x02	// eeprom DI bit
+ #define EEPROM_CS		0x04	// eeprom CS bit
+ #define EEPROM_EN		0x08	// eeprom output enable
+#define REG_BLKSIZE		0x08	// Block transfer len (24 bit)
+
+/* flags */
+#define fifo_wait		0x10
+
+/* DONT CHANGE THESE LEST YOU BREAK EVERYTHING - BIT FIELD DEPENDENCIES */
+#define PPCMODE_UNI_SW		0
+#define PPCMODE_UNI_FW		1
+#define PPCMODE_BI_SW		2
+#define PPCMODE_BI_FW		3
+#define PPCMODE_EPP_BYTE	4
+#define PPCMODE_EPP_WORD	5
+#define PPCMODE_EPP_DWORD	6
+
+int mode_map[] = { PPCMODE_UNI_FW, PPCMODE_BI_FW, PPCMODE_EPP_BYTE,
+		   PPCMODE_EPP_WORD, PPCMODE_EPP_DWORD };
+
 static void bpck6_send_cmd(struct pi_adapter *pi, u8 cmd)
 {
 	switch (mode_map[pi->mode]) {
diff --git a/drivers/ata/pata_parport/ppc6lnx.c b/drivers/ata/pata_parport/ppc6lnx.c
index 9a763cbda130..e72b1842adda 100644
--- a/drivers/ata/pata_parport/ppc6lnx.c
+++ b/drivers/ata/pata_parport/ppc6lnx.c
@@ -15,57 +15,3 @@
 
 //***************************************************************************
 
-//  60772 Commands
-
-#define ACCESS_REG				0x00
-#define ACCESS_PORT				0x40
-
-#define ACCESS_READ				0x00
-#define ACCESS_WRITE			0x20
-
-//  60772 Command Prefix
-
-#define CMD_PREFIX_SET		0xe0		// Special command that modifies the next command's operation
-#define CMD_PREFIX_RESET	0xc0		// Resets current cmd modifier reg bits
- #define PREFIX_IO16			0x01		// perform 16-bit wide I/O
- #define PREFIX_FASTWR		0x04		// enable PPC mode fast-write
- #define PREFIX_BLK				0x08		// enable block transfer mode
-
-// 60772 Registers
-
-#define REG_STATUS				0x00		// status register
- #define STATUS_IRQA			0x01		// Peripheral IRQA line
- #define STATUS_EEPROM_DO	0x40		// Serial EEPROM data bit
-#define REG_VERSION				0x01		// PPC version register (read)
-#define REG_HWCFG					0x02		// Hardware Config register
-#define REG_RAMSIZE				0x03		// Size of RAM Buffer
- #define RAMSIZE_128K			0x02
-#define REG_EEPROM				0x06		// EEPROM control register
- #define EEPROM_SK				0x01		// eeprom SK bit
- #define EEPROM_DI				0x02		// eeprom DI bit
- #define EEPROM_CS				0x04		// eeprom CS bit
- #define EEPROM_EN				0x08		// eeprom output enable
-#define REG_BLKSIZE				0x08		// Block transfer len (24 bit)
-
-//***************************************************************************
-
-// ppc_flags
-
-#define fifo_wait					0x10
-
-//***************************************************************************
-
-// DONT CHANGE THESE LEST YOU BREAK EVERYTHING - BIT FIELD DEPENDENCIES
-
-#define PPCMODE_UNI_SW		0
-#define PPCMODE_UNI_FW		1
-#define PPCMODE_BI_SW			2
-#define PPCMODE_BI_FW			3
-#define PPCMODE_EPP_BYTE	4
-#define PPCMODE_EPP_WORD	5
-#define PPCMODE_EPP_DWORD	6
-
-//***************************************************************************
-
-int mode_map[] = { PPCMODE_UNI_FW, PPCMODE_BI_FW, PPCMODE_EPP_BYTE,
-		   PPCMODE_EPP_WORD, PPCMODE_EPP_DWORD };
-- 
Ondrej Zary




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux