Re: [PATCH v2 1/3] dt-bindings: intel,ixp4xx-expansion-bus: split out peripheral properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30/01/2023 20:12, Rob Herring wrote:
> On Fri, Jan 27, 2023 at 10:32:15AM +0100, Krzysztof Kozlowski wrote:
>> The properties of devices in IXP4xx expansion bus need to be also
>> applied to actual devices' bindings.  Prepare for this by splitting them
>> to separate intel,ixp4xx-expansion-peripheral-props binding, just like
>> other memory-controller peripheral properties.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>> ---
>>  ...intel,ixp4xx-expansion-bus-controller.yaml | 64 +--------------
>>  ...tel,ixp4xx-expansion-peripheral-props.yaml | 80 +++++++++++++++++++
> 
> Kind of odd to have these in 2 directories. Can we move 
> intel,ixp4xx-expansion-bus-controller.yaml to 
> bindings/memory-controllers/?

Indeed mostly we kept them so far in memory-controllers. Some of these
buses are used for attaching some type of memory, but I don't know if
ixp4xx can work like this.

> 
> Or maybe all the external/parallel bus interfaces need their own 
> directory?

Except the IXP4xx, I wouldn't know which one goes where... Example is
exynos-srom which can work with memory (SRAM, ROM, flash) or devices.

I'll move it to memory-controllers.


> 
>>  .../mc-peripheral-props.yaml                  |  1 +
>>  3 files changed, 82 insertions(+), 63 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
>> index 5fb4e7bfa4da..a771796ec499 100644
>> --- a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
>> +++ b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
>> @@ -56,69 +56,7 @@ patternProperties:
>>      description: Devices attached to chip selects are represented as
>>        subnodes.
>>      type: object
>> -
>> -    properties:
>> -      intel,ixp4xx-eb-t1:
>> -        description: Address timing, extend address phase with n cycles.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        maximum: 3
>> -
>> -      intel,ixp4xx-eb-t2:
>> -        description: Setup chip select timing, extend setup phase with n cycles.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        maximum: 3
>> -
>> -      intel,ixp4xx-eb-t3:
>> -        description: Strobe timing, extend strobe phase with n cycles.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        maximum: 15
>> -
>> -      intel,ixp4xx-eb-t4:
>> -        description: Hold timing, extend hold phase with n cycles.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        maximum: 3
>> -
>> -      intel,ixp4xx-eb-t5:
>> -        description: Recovery timing, extend recovery phase with n cycles.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        maximum: 15
>> -
>> -      intel,ixp4xx-eb-cycle-type:
>> -        description: The type of cycles to use on the expansion bus for this
>> -          chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        enum: [0, 1, 2]
>> -
>> -      intel,ixp4xx-eb-byte-access-on-halfword:
>> -        description: Allow byte read access on half word devices.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        enum: [0, 1]
>> -
>> -      intel,ixp4xx-eb-hpi-hrdy-pol-high:
>> -        description: Set HPI HRDY polarity to active high when using HPI.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        enum: [0, 1]
>> -
>> -      intel,ixp4xx-eb-mux-address-and-data:
>> -        description: Multiplex address and data on the data bus.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        enum: [0, 1]
>> -
>> -      intel,ixp4xx-eb-ahb-split-transfers:
>> -        description: Enable AHB split transfers.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        enum: [0, 1]
>> -
>> -      intel,ixp4xx-eb-write-enable:
>> -        description: Enable write cycles.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        enum: [0, 1]
>> -
>> -      intel,ixp4xx-eb-byte-access:
>> -        description: Expansion bus uses only 8 bits. The default is to use
>> -          16 bits.
>> -        $ref: /schemas/types.yaml#/definitions/uint32
>> -        enum: [0, 1]
>> +    $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
>>  
>>  required:
>>    - compatible
>> diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
>> new file mode 100644
>> index 000000000000..8f782c80e88b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
>> @@ -0,0 +1,80 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Peripheral properties for Intel IXP4xx Expansion Bus
>> +
>> +description: |
> 
> Don't need '|'.

Right.


Best regards,
Krzysztof




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux