Re: [PATCH v3 13/18] ata: libata-scsi: handle CDL bits in ata_scsiop_maint_in()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/24/23 20:02, Niklas Cassel wrote:
From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>

For a scsi MAINTENANCE_IN/MI_REPORT_SUPPORTED_OPERATION_CODES operation,
add the translation of the rwcdlp and cdlp bits for the READ16 and
WRITE16 commands. If the ATA device does not support command duration
limits, these bits are always 0. If the ATA device supports command
duration limits, the rwcdlp bit is set to 1 for READ16 and WRITE16 and
the cdlp bits are set to 0x1 for READ16 and 0x2 for WRITE16. These
correspond to the T2A mode page containing the read descriptors and
to the T2B mode page containing the write descriptors, as defined in
SAT-5.

Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxx>
---
  drivers/ata/libata-scsi.c | 30 ++++++++++++++++++++++++++----
  1 file changed, 26 insertions(+), 4 deletions(-)

Reviewed-by: Hannes Reinecke <hare@xxxxxxx>

Cheers,

Hannes




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux