The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach.
Use this new API.
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/ata/ahci_imx.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 79aa9f285312..5ad9a890e71a 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -327,7 +327,7 @@ static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio)
}
/* SATA AHCI temperature monitor */
-static int sata_ahci_read_temperature(void *dev, int *temp)
+static int __sata_ahci_read_temperature(void *dev, int *temp)
{
u16 mpll_test_reg, rtune_ctl_reg, dac_ctl_reg, read_sum;
u32 str1, str2, str3, str4;
@@ -416,6 +416,11 @@ static int sata_ahci_read_temperature(void *dev, int *temp)
return 0;
}
+static int sata_ahci_read_temperature(struct thermal_zone_device *tz, int *temp)
+{
+ return __sata_ahci_read_temperature(tz->devdata, temp);
+}
+
static ssize_t sata_ahci_show_temp(struct device *dev,
struct device_attribute *da,
char *buf)
@@ -423,14 +428,14 @@ static ssize_t sata_ahci_show_temp(struct device *dev,
unsigned int temp = 0;
int err;
- err = sata_ahci_read_temperature(dev, &temp);
+ err = __sata_ahci_read_temperature(dev, &temp);
if (err < 0)
return err;
return sprintf(buf, "%u\n", temp);
}
-static const struct thermal_zone_of_device_ops fsl_sata_ahci_of_thermal_ops = {
+static struct thermal_zone_device_ops fsl_sata_ahci_of_thermal_ops = {
.get_temp = sata_ahci_read_temperature,
};
@@ -1131,8 +1136,8 @@ static int imx_ahci_probe(struct platform_device *pdev)
ret = PTR_ERR(hwmon_dev);
goto disable_clk;
}
- devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev,
- &fsl_sata_ahci_of_thermal_ops);
+ devm_thermal_of_zone_register(hwmon_dev, 0, hwmon_dev,
+ &fsl_sata_ahci_of_thermal_ops);
dev_info(dev, "%s: sensor 'sata_ahci'\n", dev_name(hwmon_dev));
}
--
2.25.1
