Re: [PATCH RFC v2 03/18] scsi: core: Implement reserved command handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/20/22 15:45, Hannes Reinecke wrote:
> On 6/13/22 11:06, Damien Le Moal wrote:
>> On 6/13/22 17:25, John Garry wrote:
> [ .. ]
>>>
>>> We may have 32 regular tags and 1 reserved tag for SATA.
>>
>> Right. But that is the messy part though. That extra 1 tag is actually not
>> a tag since all internal commands are non-NCQ commands that do not need a
>> tag...
>>
>> I am working on command duration limits support currently. This feature
>> set has a new horrendous "improvement": a command can be aborted by the
>> device if it fails its duration limit, but the abort is done with a good
>> status + sense data available bit set so that the device queue is not
>> aborted entirely like with a regular NCQ command error.
>>
>> For such aborted commands, the command sense data is set to
>> "COMPLETED/DATA UNAVAILABLE". In this case, the host needs to go read the
>> new "successful NCQ sense data log" to check that the command sense is
>> indeed "COMPLETED/DATA UNAVAILABLE". And to go read that log page without
>> stalling the device queue, we would need an internal NCQ (queuable) command.
>>
>> Currently, that is not possible to do cleanly as there are no guarantees
>> we can get a free tag (there is a race between block layer tag allocation
>> and libata internal tag counting). So a reserved tag for that would be
>> nice. We would end up with 31 IO tags at most + 1 reserved tag for NCQ
>> commands + ATA_TAG_INTERNAL for non-NCQ. That last one would be rendered
>> rather useless. But that also means that we kind-of go back to the days
>> when Linux showed ATA drives max QD of 31...
>>
>> I am still struggling with this particular use case and trying to make it
>> fit with your series. Trying out different things right now.
>>
> Hmm. Struggling on how that is supposed to work in general.

The standard monks defined it as conceptually easy: if a command completes
with success and sense data available bit set, then just read that log
page that has the sense data to check what happened. Very trivial in
principle.
But of course, this is ATA, so a mess in practice because we want to do
that read log with an NCQ command to less impact on the drive performance
than a regular error. Otherwise, if we simply do a regular eh, we end up
with the same impact as a hard command failure. And then we end up with
all these problems with tag reusing and nothing in libata allowing to do
internal ncq commands.

> As we're reading from a log to get the sense information I guess that 
> log is organized by tag index. Meaning we have to keep hold of the tag 
> which generated that error.

Yep. This is a 1024B log which has all the sense information of for all
completed NCQ commands, organized per tag.

> Q1: Can we (re-) use that tag to read the log information?

I thought of that. BUT: if a revalidate or regular eh is ongoing, we need
to delay issuing of the NCQ read log command since eh will prevent issuing
anything (there will be non-ncq commands on-going). Problem here is that
delaying ncq commands means essentially doing a requeue so we need a real
req/scsi req for that. Reusing the tag for a new temporary internal qc is
not enough.

> Q2: What do you do if all 32 command generate such an error?

For that case, I can simply use the internal tag and do a non-ncq read
log. That is actually the easy case !

> But really, this sounds no different from the 'classical' request sense 
> handling in SCSI ML. Have you considered just run with that an map 
> 'REQUEST SENSE' on your new NCQ Get Log page command?

I am exploring the reuse of the scsi EH now. But very messy on libata
side. Still no good solution.

While doing that, I did discover that libata eh is very messy because of
one driver only: scsi ipr. That is the only one that does not have a
->error_handler port operation. And because of that, we are stuck with
lots of "old EH" ata code. So there are always 2 different eh path.
Complete mess. I am trying to see if I can't convert scsi ipr to have a
error_handler port operation, but I cannot test anything as I do not have
the hardware.

> 
> Cheers,
> 
> Hannes


-- 
Damien Le Moal
Western Digital Research



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux