Re: [PATCH v3 03/23] dt-bindings: ata: ahci-platform: Clarify common AHCI props constraints

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 12, 2022 at 02:17:50AM +0300, Serge Semin wrote:
> Indeed in accordance with what is imeplemtned in the AHCI paltform driver
> and the way the AHCI DT nodes are defined in the DT files we can add the
> next AHCI DT properties constraints: AHCI CSR ID is fixed to 'ahci', PHY
> name is fixed to 'sata-phy', AHCI controller can't have more than 32 ports
> by design.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> 
> Changelog v2:
> - This is a new patch created after rebasing v1 onto the 5.18-rc3 kernel.
> ---
>  .../devicetree/bindings/ata/ahci-common.yaml      | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> index 620042ca12e7..a7d1a8353de3 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml
> +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> @@ -31,6 +31,8 @@ properties:
>  
>    reg-names:
>      description: CSR space IDs
> +    contains:
> +      const: ahci

Okay, with this it makes sense to keep. The others still should go.

>  
>    interrupts:
>      description:
> @@ -71,14 +73,13 @@ properties:
>      maxItems: 1
>  
>    phy-names:
> -    maxItems: 1
> +    const: sata-phy
>  
>    ports-implemented:
>      $ref: '/schemas/types.yaml#/definitions/uint32'
>      description:
>        Mask that indicates which ports the HBA supports. Useful if PI is not
>        programmed by the BIOS, which is true for some embedded SoC's.
> -    maximum: 0x1f
>  
>  patternProperties:
>    "^sata-port@[0-9a-f]+$":
> @@ -89,8 +90,12 @@ patternProperties:
>  
>      properties:
>        reg:
> -        description: AHCI SATA port identifier
> -        maxItems: 1
> +        description:
> +          AHCI SATA port identifier. By design AHCI controller can't have
> +          more than 32 ports due to the CAP.NP fields and PI register size
> +          constraints.
> +        minimum: 0
> +        maximum: 31
>  
>        phys:
>          description: Individual AHCI SATA port PHY
> @@ -98,7 +103,7 @@ patternProperties:
>  
>        phy-names:
>          description: AHCI SATA port PHY ID
> -        maxItems: 1
> +        const: sata-phy
>  
>        target-supply:
>          description: Power regulator for SATA port target device
> -- 
> 2.35.1
> 
> 



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux