Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 22, 2021 at 06:10:01PM +0100, Cye Borg wrote:
> PWS 500au:
> 
> snow / # lspci -vvx -s 7.1
> 00:07.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [ISA
> Compatibility mode-only controller, supports bus mastering])
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 0
>         Region 0: I/O ports at 01f0 [size=8]
>         Region 1: I/O ports at 03f4
>         Region 4: I/O ports at 9080 [size=16]
>         Kernel driver in use: pata_cypress
>         Kernel modules: pata_cypress
> 00: 80 10 93 c6 45 00 80 02 00 80 01 01 00 00 80 00
> 10: f1 01 00 00 f5 03 00 00 00 00 00 00 00 00 00 00
> 20: 81 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
> 
> snow / # lspci -vvx -s 7.2
> 00:07.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [ISA
> Compatibility mode-only controller])
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 0
>         Region 0: I/O ports at 0170 [size=8]
>         Region 1: I/O ports at 0374
>         Region 4: Memory at 0c240000 (32-bit, non-prefetchable)
> [disabled] [size=64K]
>         Kernel modules: pata_cypress
> 00: 80 10 93 c6 45 00 80 02 00 00 01 01 00 00 80 00
> 10: 71 01 00 00 75 03 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 24 0c 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00

Thanks very much.

Could I also ask for the output of:

# lspci -vxxx -s 7.0

as well please - this will dump all 256 bytes for the ISA bridge, which
contains a bunch of configuration registers. Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux