Fixes the following W=1 kernel build warning(s): drivers/ata/pata_sil680.c:68: warning: Function parameter or member 'adev' not described in 'sil680_seldev' drivers/ata/pata_sil680.c:254: warning: Function parameter or member 'try_mmio' not described in 'sil680_init_chip' Cc: Jens Axboe <axboe@xxxxxxxxx> Cc: Andre Hedrick <andre@xxxxxxxxxxxxx> Cc: Red Hat <alan@xxxxxxxxxx> Cc: linux-ide@xxxxxxxxxxxxxxx Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> --- drivers/ata/pata_sil680.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 7ab9aea3b6305..43215a664b960 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -57,6 +57,7 @@ static unsigned long sil680_selreg(struct ata_port *ap, int r) /** * sil680_seldev - return register base * @ap: ATA interface + * @adev: ATA device * @r: config offset * * Turn a config register offset into the right address in PCI space @@ -244,6 +245,7 @@ static struct ata_port_operations sil680_port_ops = { /** * sil680_init_chip - chip setup * @pdev: PCI device + * @try_mmio: Indicates to caller whether MMIO should be attempted * * Perform all the chip setup which must be done both when the device * is powered up on boot and when we resume in case we resumed from RAM. -- 2.27.0