Hi All,
Booting a 5.11-rc2 kernel with lockdep enabled inside a virtualbox vm (which still
emulates good old piix ATA controllers) I get the below lockdep splat early on during boot:
This seems to be led-class related but also seems to have a (P)ATA
part to it. To the best of my knowledge this is a new problem in 5.11 .
Regards,
Hans
And here is the promised lockdep log:
[ 1.133779] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.137293] ========================================================
[ 1.137819] WARNING: possible irq lock inversion dependency detected
[ 1.138329] 5.11.0-rc2+ #187 Not tainted
[ 1.138843] --------------------------------------------------------
[ 1.139353] kworker/0:0/5 just changed the state of lock:
[ 1.139862] ffff8be5c721c218 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x24/0x200
[ 1.140399] but this lock took another, HARDIRQ-READ-unsafe lock in the past:
[ 1.140932] (&trig->leddev_list_lock){.+.?}-{2:2}
[ 1.140934]
and interrupts could create inverse lock ordering between them.
[ 1.143434]
other info that might help us debug this:
[ 1.144362] Possible interrupt unsafe locking scenario:
[ 1.145291] CPU0 CPU1
[ 1.145753] ---- ----
[ 1.146214] lock(&trig->leddev_list_lock);
[ 1.146654] local_irq_disable();
[ 1.147112] lock(&host->lock);
[ 1.147569] lock(&trig->leddev_list_lock);
[ 1.148037] <Interrupt>
[ 1.148486] lock(&host->lock);
[ 1.148920]
*** DEADLOCK ***
[ 1.150187] no locks held by kworker/0:0/5.
[ 1.150616]
the shortest dependencies between 2nd lock and 1st lock:
[ 1.151452] -> (&trig->leddev_list_lock){.+.?}-{2:2} {
[ 1.151872] HARDIRQ-ON-R at:
[ 1.152275] lock_acquire+0x116/0x370
[ 1.152690] _raw_read_lock+0x38/0x70
[ 1.153092] led_trigger_event+0x26/0x70
[ 1.153502] kbd_bh+0x98/0xc0
[ 1.153897] tasklet_action_common.constprop.0+0xe5/0x100
[ 1.154302] __do_softirq+0xdd/0x489
[ 1.154704] run_ksoftirqd+0x3a/0x70
[ 1.155094] smpboot_thread_fn+0x10b/0x1e0
[ 1.155486] kthread+0x137/0x150
[ 1.155872] ret_from_fork+0x22/0x30
[ 1.156257] IN-SOFTIRQ-R at:
[ 1.156641] lock_acquire+0x116/0x370
[ 1.157030] _raw_read_lock+0x38/0x70
[ 1.157419] led_trigger_event+0x26/0x70
[ 1.157800] kbd_bh+0x98/0xc0
[ 1.158175] tasklet_action_common.constprop.0+0xe5/0x100
[ 1.158560] __do_softirq+0xdd/0x489
[ 1.158933] run_ksoftirqd+0x3a/0x70
[ 1.159304] smpboot_thread_fn+0x10b/0x1e0
[ 1.159667] kthread+0x137/0x150
[ 1.160022] ret_from_fork+0x22/0x30
[ 1.160372] SOFTIRQ-ON-R at:
[ 1.160705] lock_acquire+0x116/0x370
[ 1.161040] _raw_read_lock+0x5d/0x70
[ 1.161377] led_trigger_event+0x26/0x70
[ 1.161716] power_supply_update_leds+0x4b/0x1b0
[ 1.162057] power_supply_changed_work+0x70/0xf0
[ 1.162382] process_one_work+0x26e/0x570
[ 1.162709] worker_thread+0x55/0x3c0
[ 1.163033] kthread+0x137/0x150
[ 1.163359] ret_from_fork+0x22/0x30
[ 1.163677] INITIAL USE at:
[ 1.163993] lock_acquire+0x116/0x370
[ 1.164327] _raw_write_lock_irqsave+0x48/0x60
[ 1.164657] led_trigger_set+0x184/0x2e0
[ 1.164982] led_trigger_set_default+0x96/0xc0
[ 1.165312] led_classdev_register_ext+0x29e/0x370
[ 1.165642] input_leds_connect+0x146/0x280
[ 1.165969] input_attach_handler+0x7a/0xa0
[ 1.166299] input_register_device.cold+0xa1/0x153
[ 1.166630] atkbd_connect+0x269/0x340
[ 1.166963] serio_driver_probe+0x38/0x50
[ 1.167303] really_probe+0x205/0x460
[ 1.167639] driver_probe_device+0xe1/0x150
[ 1.167974] device_driver_attach+0xa8/0xb0
[ 1.168309] __driver_attach+0x8c/0x150
[ 1.168635] bus_for_each_dev+0x67/0x90
[ 1.168960] serio_handle_event+0x124/0x2d0
[ 1.169285] process_one_work+0x26e/0x570
[ 1.169608] worker_thread+0x55/0x3c0
[ 1.169929] kthread+0x137/0x150
[ 1.170254] ret_from_fork+0x22/0x30
[ 1.170572] INITIAL READ USE at:
[ 1.170884] lock_acquire+0x116/0x370
[ 1.171210] _raw_read_lock+0x38/0x70
[ 1.171532] led_trigger_event+0x26/0x70
[ 1.171854] kbd_bh+0x98/0xc0
[ 1.172180] tasklet_action_common.constprop.0+0xe5/0x100
[ 1.172507] __do_softirq+0xdd/0x489
[ 1.172831] run_ksoftirqd+0x3a/0x70
[ 1.173156] smpboot_thread_fn+0x10b/0x1e0
[ 1.173480] kthread+0x137/0x150
[ 1.173811] ret_from_fork+0x22/0x30
[ 1.174126] }
[ 1.174429] ... key at: [<ffffffff8b09e530>] __key.0+0x0/0x10
[ 1.174789] ... acquired at:
[ 1.175110] _raw_read_lock+0x5d/0x70
[ 1.175429] led_trigger_blink_oneshot+0x30/0x80
[ 1.175752] ledtrig_disk_activity+0x28/0x70
[ 1.176081] ata_qc_complete+0x21/0x440
[ 1.176415] ata_sff_hsm_move+0x16b/0x760
[ 1.176746] ata_sff_pio_task+0xbf/0x1a0
[ 1.177062] process_one_work+0x26e/0x570
[ 1.177370] worker_thread+0x55/0x3c0
[ 1.177692] kthread+0x137/0x150
[ 1.177989] ret_from_fork+0x22/0x30
[ 1.178598] -> (&host->lock){-...}-{2:2} {
[ 1.178892] IN-HARDIRQ-W at:
[ 1.179185] lock_acquire+0x116/0x370
[ 1.179479] _raw_spin_lock_irqsave+0x48/0x60
[ 1.179781] ata_bmdma_interrupt+0x24/0x200
[ 1.180074] __handle_irq_event_percpu+0xcd/0x2b0
[ 1.180369] handle_irq_event+0x45/0x90
[ 1.180662] handle_edge_irq+0x87/0x220
[ 1.180954] asm_call_irq_on_stack+0x12/0x20
[ 1.181256] common_interrupt+0xf2/0x1a0
[ 1.181550] asm_common_interrupt+0x1e/0x40
[ 1.181842] _raw_spin_unlock_irq+0x2b/0x40
[ 1.182143] finish_task_switch.isra.0+0xa0/0x2c0
[ 1.182434] __schedule+0x375/0xaf0
[ 1.182723] schedule+0x5b/0xc0
[ 1.183014] schedule_timeout+0x15b/0x1c0
[ 1.183302] wait_for_completion_killable+0xbb/0x140
[ 1.183594] __kthread_create_on_node+0xe5/0x1a0
[ 1.183887] kthread_create_on_node+0x39/0x40
[ 1.184184] create_worker+0xff/0x1e0
[ 1.184477] worker_thread+0x2e0/0x3c0
[ 1.184772] kthread+0x137/0x150
[ 1.185069] ret_from_fork+0x22/0x30
[ 1.185360] INITIAL USE at:
[ 1.185643] lock_acquire+0x116/0x370
[ 1.185934] _raw_spin_lock_irqsave+0x48/0x60
[ 1.186255] ata_dev_init+0x4d/0xe0
[ 1.186549] ata_link_init+0x86/0xd0
[ 1.186837] ata_port_alloc+0x1e6/0x200
[ 1.187128] ata_host_alloc+0xf3/0x130
[ 1.187413] ata_host_alloc_pinfo+0x10/0xa0
[ 1.187697] ahci_init_one+0x4f9/0xa20
[ 1.187984] local_pci_probe+0x42/0x80
[ 1.188275] pci_device_probe+0xd9/0x190
[ 1.188558] really_probe+0x205/0x460
[ 1.188838] driver_probe_device+0xe1/0x150
[ 1.189137] device_driver_attach+0xa8/0xb0
[ 1.189437] __driver_attach+0x8c/0x150
[ 1.189750] bus_for_each_dev+0x67/0x90
[ 1.190094] bus_add_driver+0x12e/0x1f0
[ 1.190393] driver_register+0x8b/0xe0
[ 1.190698] do_one_initcall+0x5b/0x2d0
[ 1.191043] kernel_init_freeable+0x261/0x2aa
[ 1.191367] kernel_init+0xa/0x111
[ 1.191669] ret_from_fork+0x22/0x30
[ 1.192009] }
[ 1.192313] ... key at: [<ffffffff8b098b90>] __key.6+0x0/0x10
[ 1.192611] ... acquired at:
[ 1.192947] __lock_acquire+0x93f/0x1e10
[ 1.193258] lock_acquire+0x116/0x370
[ 1.193585] _raw_spin_lock_irqsave+0x48/0x60
[ 1.193896] ata_bmdma_interrupt+0x24/0x200
[ 1.194193] __handle_irq_event_percpu+0xcd/0x2b0
[ 1.194506] handle_irq_event+0x45/0x90
[ 1.194840] handle_edge_irq+0x87/0x220
[ 1.195155] asm_call_irq_on_stack+0x12/0x20
[ 1.195445] common_interrupt+0xf2/0x1a0
[ 1.195745] asm_common_interrupt+0x1e/0x40
[ 1.196067] _raw_spin_unlock_irq+0x2b/0x40
[ 1.196371] finish_task_switch.isra.0+0xa0/0x2c0
[ 1.196664] __schedule+0x375/0xaf0
[ 1.196993] schedule+0x5b/0xc0
[ 1.197300] schedule_timeout+0x15b/0x1c0
[ 1.197606] wait_for_completion_killable+0xbb/0x140
[ 1.197915] __kthread_create_on_node+0xe5/0x1a0
[ 1.198223] kthread_create_on_node+0x39/0x40
[ 1.198558] create_worker+0xff/0x1e0
[ 1.198889] worker_thread+0x2e0/0x3c0
[ 1.199189] kthread+0x137/0x150
[ 1.199520] ret_from_fork+0x22/0x30
[ 1.200186]
stack backtrace:
[ 1.200804] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.11.0-rc2+ #187
[ 1.201141] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 1.201495] Workqueue: 0x0 (ipv6_addrconf)
[ 1.201856] Call Trace:
[ 1.202211] <IRQ>
[ 1.202585] dump_stack+0x8b/0xb0
[ 1.202943] mark_lock.cold+0x58/0xe9
[ 1.203297] __lock_acquire+0x93f/0x1e10
[ 1.203647] ? lockdep_hardirqs_on_prepare+0x78/0x180
[ 1.204035] ? slab_free_freelist_hook+0xdf/0x160
[ 1.204405] lock_acquire+0x116/0x370
[ 1.204774] ? ata_bmdma_interrupt+0x24/0x200
[ 1.205150] ? __lock_acquire+0x382/0x1e10
[ 1.205509] ? mark_held_locks+0x10/0x70
[ 1.205898] _raw_spin_lock_irqsave+0x48/0x60
[ 1.206272] ? ata_bmdma_interrupt+0x24/0x200
[ 1.206687] ata_bmdma_interrupt+0x24/0x200
[ 1.207076] __handle_irq_event_percpu+0xcd/0x2b0
[ 1.207452] handle_irq_event+0x45/0x90
[ 1.207870] handle_edge_irq+0x87/0x220
[ 1.208231] asm_call_irq_on_stack+0x12/0x20
[ 1.208610] </IRQ>
[ 1.208999] common_interrupt+0xf2/0x1a0
[ 1.209375] asm_common_interrupt+0x1e/0x40
[ 1.209756] RIP: 0010:_raw_spin_unlock_irq+0x2b/0x40
[ 1.210136] Code: 1f 44 00 00 55 48 8b 74 24 08 48 89 fd 48 8d 7f 18 e8 e9 0f 46 ff 48 89 ef e8 a1 50 46 ff e8 5c f2 51 ff fb 66 0f 1f 44 00 00 <65> ff 0d 8e 55 32 77 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 90 0f
[ 1.210948] RSP: 0018:ffffb1164003bc18 EFLAGS: 00000206
[ 1.211363] RAX: 0000000000000071 RBX: 0000000000000002 RCX: 0000000000000000
[ 1.211803] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff88cf2824
[ 1.212216] RBP: ffff8be5dbc2bd80 R08: 0000000000000001 R09: 0000000000000001
[ 1.212642] R10: 0000000000000046 R11: 0000000000000000 R12: ffff8be5dbc2bd80
[ 1.213092] R13: ffff8be5c7393140 R14: 0000000000000000 R15: ffff8be5c0293140
[ 1.213544] ? _raw_spin_unlock_irq+0x24/0x40
[ 1.213972] ? _raw_spin_unlock_irq+0x24/0x40
[ 1.214354] finish_task_switch.isra.0+0xa0/0x2c0
[ 1.214745] ? finish_task_switch.isra.0+0x6a/0x2c0
[ 1.215130] __schedule+0x375/0xaf0
[ 1.215513] ? process_one_work+0x570/0x570
[ 1.215902] schedule+0x5b/0xc0
[ 1.216281] schedule_timeout+0x15b/0x1c0
[ 1.216665] ? wait_for_completion_killable+0xb3/0x140
[ 1.217051] ? lockdep_hardirqs_on_prepare+0xff/0x180
[ 1.217439] ? _raw_spin_unlock_irq+0x24/0x40
[ 1.217836] wait_for_completion_killable+0xbb/0x140
[ 1.218231] __kthread_create_on_node+0xe5/0x1a0
[ 1.218638] kthread_create_on_node+0x39/0x40
[ 1.219042] create_worker+0xff/0x1e0
[ 1.219440] worker_thread+0x2e0/0x3c0
[ 1.219830] ? process_one_work+0x570/0x570
[ 1.220209] kthread+0x137/0x150
[ 1.220589] ? __kthread_bind_mask+0x60/0x60
[ 1.220972] ret_from_fork+0x22/0x30
[ 1.241802] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 1.325338] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.326970] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.327339] ata1.00: 41943040 sectors, multi 128: LBA48 NCQ (depth 32)
[ 1.327980] ata1.00: configured for UDMA/133
