Re: [PATCH 7/7] arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 10/7/20 5:45 PM, sven.auhagen@xxxxxxxxxxxx wrote:
> From: Sven Auhagen <sven.auhagen@xxxxxxxxxxxx>
> 
> There are two SATA ports per CP110. Each of them has a dedicated
> interrupt. Describe the real hardware by adding two SATA ports to the
> CP110 SATA node.
> 
> Signed-off-by: Sven Auhagen <sven.auhagen@xxxxxxxxxxxx>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>

Patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Regards,

Hans

> ---
>  arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> index 9dcf16beabf5..ec27294f097b 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> @@ -300,11 +300,9 @@
>  		};
>  
>  		CP11X_LABEL(sata0): sata@540000 {
> -			compatible = "marvell,armada-8k-ahci",
> -			"generic-ahci";
> +			compatible = "marvell,armada-8k-ahci";
>  			reg = <0x540000 0x30000>;
>  			dma-coherent;
> -			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&CP11X_LABEL(clk) 1 15>,
>  				 <&CP11X_LABEL(clk) 1 16>;
>  			#address-cells = <1>;
> @@ -312,10 +310,12 @@
>  			status = "disabled";
>  
>  			sata-port@0 {
> +				interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <0>;
>  			};
>  
>  			sata-port@1 {
> +				interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
>  				reg = <1>;
>  			};
>  		};
> 




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux