Hello!
On 10.08.2020 3:59, YourName wrote:
From: Daniel <argoz1701@xxxxxxxxx>
Full name needed here.
---
drivers/ata/acard-ahci.c | 6 +++---
drivers/bluetooth/bfusb.c | 5 ++---
drivers/clk/clk-asm9260.c | 12 ++++++------
3 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 2a04e8abd397..3ffb21f3e88b 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -79,10 +79,10 @@ static struct ata_port_operations acard_ops = {
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
-static const struct ata_port_info acard_ahci_port_info[] = {
+static const struct ata_port_info acard_ahci_port_info[] ={
[board_acard_ahci] =
- {
- AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ),
+
+ { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ),
This does nothing except ruining the valid code formatting.
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index 5a321b4076aa..dc6a62cb1941 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -355,15 +355,14 @@ static void bfusb_rx_complete(struct urb *urb)
while (count) {
hdr = buf[0] | (buf[1] << 8);
- if (hdr & 0x4000) {
+ if (hdr & 0x4000)
len = 0;
count -= 2;
buf += 2;
- } else {
+ else {
len = (buf[2] == 0) ? 256 : buf[2];
count -= 3;
buf += 3;
- }
This just ruins the code.
if (count < len) {
bt_dev_err(data->hdev, "block extends over URB buffer ranges");
diff --git a/drivers/clk/clk-asm9260.c b/drivers/clk/clk-asm9260.c
index bacebd457e6f..4e608807a00a 100644
--- a/drivers/clk/clk-asm9260.c
+++ b/drivers/clk/clk-asm9260.c
@@ -92,8 +92,8 @@ static const struct asm9260_div_clk asm9260_div_clks[] __initconst = {
{ CLKID_SYS_CPU, "cpu_div", "main_gate", HW_CPUCLKDIV },
{ CLKID_SYS_AHB, "ahb_div", "cpu_div", HW_SYSAHBCLKDIV },
- /* i2s has two deviders: one for only external mclk and internal
- * devider for all clks. */
+ //i2s has two deviders: one for only external mclk and internal
+ //devider for all clks.
Divider. :-) This is not the preferred multi-line comment formatting anyway.
{ CLKID_SYS_I2S0M, "i2s0m_div", "i2s0_mclk", HW_I2S0MCLKDIV },
{ CLKID_SYS_I2S1M, "i2s1m_div", "i2s1_mclk", HW_I2S1MCLKDIV },
{ CLKID_SYS_I2S0S, "i2s0s_div", "i2s0_gate", HW_I2S0SCLKDIV },
[...]
MBR, Sergei
