[PATCH 2/2] scsi: wire up ata_scsi_dma_need_drain for SAS HBA drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We need ata_scsi_dma_need_drain for all drivers wired up to drive ATAPI
devices through libata.  That also includes the SAS HBA drivers in
addition to native libata HBA drivers.

Fixes: cc97923a5bcc ("block: move dma drain handling to scsi")
Reported-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Tested-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Acked-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx>
Acked-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/aic94xx/aic94xx_init.c    | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
 drivers/scsi/ipr.c                     | 1 +
 drivers/scsi/isci/init.c               | 1 +
 drivers/scsi/mvsas/mv_init.c           | 1 +
 drivers/scsi/pm8001/pm8001_init.c      | 1 +
 8 files changed, 8 insertions(+)

diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index d022407e5645c7..bef47f38dd0dbc 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -40,6 +40,7 @@ static struct scsi_host_template aic94xx_sht = {
 	/* .name is initialized */
 	.name			= "aic94xx",
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= sas_slave_configure,
 	.scan_finished		= asd_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 2e1718f9ade218..09a7669dad4c67 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1756,6 +1756,7 @@ static struct scsi_host_template sht_v1_hw = {
 	.proc_name		= DRV_NAME,
 	.module			= THIS_MODULE,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= hisi_sas_slave_configure,
 	.scan_finished		= hisi_sas_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e7e7849a4c14e2..968d3870235359 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3532,6 +3532,7 @@ static struct scsi_host_template sht_v2_hw = {
 	.proc_name		= DRV_NAME,
 	.module			= THIS_MODULE,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= hisi_sas_slave_configure,
 	.scan_finished		= hisi_sas_scan_finished,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 3e6b78a1f993b9..55e2321a65bc5f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3075,6 +3075,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.proc_name		= DRV_NAME,
 	.module			= THIS_MODULE,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= hisi_sas_slave_configure,
 	.scan_finished		= hisi_sas_scan_finished,
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 7d77997d26d457..7d86f4ca266c86 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6731,6 +6731,7 @@ static struct scsi_host_template driver_template = {
 	.compat_ioctl = ipr_ioctl,
 #endif
 	.queuecommand = ipr_queuecommand,
+	.dma_need_drain = ata_scsi_dma_need_drain,
 	.eh_abort_handler = ipr_eh_abort,
 	.eh_device_reset_handler = ipr_eh_dev_reset,
 	.eh_host_reset_handler = ipr_eh_host_reset,
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 974c3b9116d5ba..085e285f427d93 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -153,6 +153,7 @@ static struct scsi_host_template isci_sht = {
 	.name				= DRV_NAME,
 	.proc_name			= DRV_NAME,
 	.queuecommand			= sas_queuecommand,
+	.dma_need_drain			= ata_scsi_dma_need_drain,
 	.target_alloc			= sas_target_alloc,
 	.slave_configure		= sas_slave_configure,
 	.scan_finished			= isci_host_scan_finished,
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 5973eed9493820..b0de3bdb01db06 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -33,6 +33,7 @@ static struct scsi_host_template mvs_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= sas_slave_configure,
 	.scan_finished		= mvs_scan_finished,
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index a8f5344fdfda2a..9e99262a2b9dd3 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -87,6 +87,7 @@ static struct scsi_host_template pm8001_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
 	.queuecommand		= sas_queuecommand,
+	.dma_need_drain		= ata_scsi_dma_need_drain,
 	.target_alloc		= sas_target_alloc,
 	.slave_configure	= sas_slave_configure,
 	.scan_finished		= pm8001_scan_finished,
-- 
2.26.2




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux