Hi Linus, Here are the libata changes for this merge window. This pull request contains: - Series from Bart, making the libata code smaller on PATA only setups. This is useful for smaller/embedded use cases, and will help us move some of those off drivers/ide. - Kill unused BPRINTK() (Hannes) - Add various Comet Lake ahci PCI ids (Kai-Heng, Mika) - Fix for a double scsi_host_put() in error handling (John) - Use scnprintf (Takashi) - Assign OF node to the SCSI device (Linus) Please pull! git://git.kernel.dk/linux-block.git tags/for-5.7/libata-2020-03-29 ---------------------------------------------------------------- Bartlomiej Zolnierkiewicz (27): ata: remove stale maintainership information from core code ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts ata: make SATA_PMP option selectable only if any SATA host driver is enabled sata_promise: use ata_cable_sata() ata: simplify ata_scsiop_inq_89() ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size ata: optimize struct ata_force_param size ata: optimize ata_scsi_rbuf[] size ata: move EXPORT_SYMBOL_GPL()s close to exported code ata: remove EXPORT_SYMBOL_GPL()s not used by modules ata: fix CodingStyle issues in PATA timings code ata: separate PATA timings code from libata-core.c ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts ata: start separating SATA specific code from libata-core.c ata: move sata_scr_*() to libata-sata.c ata: move *sata_set_spd*() to libata-sata.c ata: move sata_link_{debounce,resume}() to libata-sata.c ata: move sata_link_hardreset() to libata-sata.c ata: move ata_qc_complete_multiple() to libata-sata.c ata: move sata_deb_timing_*() to libata-sata.c ata: start separating SATA specific code from libata-scsi.c ata: move ata_sas_*() to libata-sata.c ata: start separating SATA specific code from libata-eh.c ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c ata: make "libata.force" kernel parameter optional Hannes Reinecke (1): libata: drop BPRINTK() John Garry (1): libata: Remove extra scsi_host_put() in ata_scsi_add_hosts() Kai-Heng Feng (1): ahci: Add Intel Comet Lake H RAID PCI ID Linus Walleij (1): libata: Assign OF node to the SCSI device Mika Westerberg (2): ahci: Add Intel Comet Lake PCH-H PCI ID ahci: Add Intel Comet Lake PCH-V PCI ID Takashi Iwai (1): libata: transport: Use scnprintf() for avoiding potential buffer overflow Tiezhu Yang (2): PCI: Add Loongson vendor ID AHCI: Add support for Loongson 7A1000 SATA controller drivers/ata/Kconfig | 77 ++ drivers/ata/Makefile | 2 + drivers/ata/ahci.c | 10 + drivers/ata/libata-core.c | 1126 +++------------------------- drivers/ata/libata-eh.c | 224 +----- drivers/ata/libata-pata-timings.c | 192 +++++ drivers/ata/libata-sata.c | 1483 +++++++++++++++++++++++++++++++++++++ drivers/ata/libata-scsi.c | 583 ++------------- drivers/ata/libata-sff.c | 4 - drivers/ata/libata-transport.c | 10 +- drivers/ata/libata.h | 25 +- drivers/ata/sata_promise.c | 8 +- drivers/scsi/Kconfig | 1 + drivers/scsi/libsas/Kconfig | 1 + include/linux/libata.h | 174 +++-- include/linux/pci_ids.h | 2 + 16 files changed, 2065 insertions(+), 1857 deletions(-) create mode 100644 drivers/ata/libata-pata-timings.c create mode 100644 drivers/ata/libata-sata.c -- Jens Axboe