[PATCH v5 03/27] ata: make SATA_PMP option selectable only if any SATA host driver is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.

This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.

CC: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx>
Reviewed-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> # for SCSI bits
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
 drivers/ata/Kconfig         | 40 +++++++++++++++++++++++++++++++++++++
 drivers/scsi/Kconfig        |  1 +
 drivers/scsi/libsas/Kconfig |  1 +
 3 files changed, 42 insertions(+)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a6beb2c5a692..ad7760656f71 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -34,6 +34,9 @@ if ATA
 config ATA_NONSTANDARD
        bool
 
+config SATA_HOST
+	bool
+
 config ATA_VERBOSE_ERROR
 	bool "Verbose ATA error reporting"
 	default y
@@ -73,6 +76,7 @@ config SATA_ZPODD
 
 config SATA_PMP
 	bool "SATA Port Multiplier support"
+	depends on SATA_HOST
 	default y
 	help
 	  This option adds support for SATA Port Multipliers
@@ -85,6 +89,7 @@ comment "Controllers with non-SFF native interface"
 config SATA_AHCI
 	tristate "AHCI SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for AHCI Serial ATA.
 
@@ -111,6 +116,7 @@ config SATA_MOBILE_LPM_POLICY
 
 config SATA_AHCI_PLATFORM
 	tristate "Platform AHCI SATA support"
+	select SATA_HOST
 	help
 	  This option enables support for Platform AHCI Serial ATA
 	  controllers.
@@ -121,6 +127,7 @@ config AHCI_BRCM
 	tristate "Broadcom AHCI SATA support"
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
 		   ARCH_BCM_63XX
+	select SATA_HOST
 	help
 	  This option enables support for the AHCI SATA3 controller found on
 	  Broadcom SoC's.
@@ -130,6 +137,7 @@ config AHCI_BRCM
 config AHCI_DA850
 	tristate "DaVinci DA850 AHCI SATA support"
 	depends on ARCH_DAVINCI_DA850
+	select SATA_HOST
 	help
 	  This option enables support for the DaVinci DA850 SoC's
 	  onboard AHCI SATA.
@@ -139,6 +147,7 @@ config AHCI_DA850
 config AHCI_DM816
 	tristate "DaVinci DM816 AHCI SATA support"
 	depends on ARCH_OMAP2PLUS
+	select SATA_HOST
 	help
 	  This option enables support for the DaVinci DM816 SoC's
 	  onboard AHCI SATA controller.
@@ -148,6 +157,7 @@ config AHCI_DM816
 config AHCI_ST
 	tristate "ST AHCI SATA support"
 	depends on ARCH_STI
+	select SATA_HOST
 	help
 	  This option enables support for ST AHCI SATA controller.
 
@@ -157,6 +167,7 @@ config AHCI_IMX
 	tristate "Freescale i.MX AHCI SATA support"
 	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 	depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
+	select SATA_HOST
 	help
 	  This option enables support for the Freescale i.MX SoC's
 	  onboard AHCI SATA.
@@ -166,6 +177,7 @@ config AHCI_IMX
 config AHCI_CEVA
 	tristate "CEVA AHCI SATA support"
 	depends on OF
+	select SATA_HOST
 	help
 	  This option enables support for the CEVA AHCI SATA.
 	  It can be found on the Xilinx Zynq UltraScale+ MPSoC.
@@ -176,6 +188,7 @@ config AHCI_MTK
 	tristate "MediaTek AHCI SATA support"
 	depends on ARCH_MEDIATEK
 	select MFD_SYSCON
+	select SATA_HOST
 	help
 	  This option enables support for the MediaTek SoC's
 	  onboard AHCI SATA controller.
@@ -185,6 +198,7 @@ config AHCI_MTK
 config AHCI_MVEBU
 	tristate "Marvell EBU AHCI SATA support"
 	depends on ARCH_MVEBU
+	select SATA_HOST
 	help
 	  This option enables support for the Marvebu EBU SoC's
 	  onboard AHCI SATA.
@@ -203,6 +217,7 @@ config AHCI_OCTEON
 config AHCI_SUNXI
 	tristate "Allwinner sunxi AHCI SATA support"
 	depends on ARCH_SUNXI
+	select SATA_HOST
 	help
 	  This option enables support for the Allwinner sunxi SoC's
 	  onboard AHCI SATA.
@@ -212,6 +227,7 @@ config AHCI_SUNXI
 config AHCI_TEGRA
 	tristate "NVIDIA Tegra AHCI SATA support"
 	depends on ARCH_TEGRA
+	select SATA_HOST
 	help
 	  This option enables support for the NVIDIA Tegra SoC's
 	  onboard AHCI SATA.
@@ -221,12 +237,14 @@ config AHCI_TEGRA
 config AHCI_XGENE
 	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 	depends on PHY_XGENE
+	select SATA_HOST
 	help
 	 This option enables support for APM X-Gene SoC SATA host controller.
 
 config AHCI_QORIQ
 	tristate "Freescale QorIQ AHCI SATA support"
 	depends on OF
+	select SATA_HOST
 	help
 	  This option enables support for the Freescale QorIQ AHCI SoC's
 	  onboard AHCI SATA.
@@ -236,6 +254,7 @@ config AHCI_QORIQ
 config SATA_FSL
 	tristate "Freescale 3.0Gbps SATA support"
 	depends on FSL_SOC
+	select SATA_HOST
 	help
 	  This option enables support for Freescale 3.0Gbps SATA controller.
 	  It can be found on MPC837x and MPC8315.
@@ -245,6 +264,7 @@ config SATA_FSL
 config SATA_GEMINI
 	tristate "Gemini SATA bridge support"
 	depends on ARCH_GEMINI || COMPILE_TEST
+	select SATA_HOST
 	default ARCH_GEMINI
 	help
 	  This enabled support for the FTIDE010 to SATA bridge
@@ -255,6 +275,7 @@ config SATA_GEMINI
 config SATA_AHCI_SEATTLE
 	tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 	depends on ARCH_SEATTLE
+	select SATA_HOST
 	help
 	 This option enables support for AMD Seattle SATA host controller.
 
@@ -263,12 +284,14 @@ config SATA_AHCI_SEATTLE
 config SATA_INIC162X
 	tristate "Initio 162x SATA support (Very Experimental)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
 config SATA_ACARD_AHCI
 	tristate "ACard AHCI variant (ATP 8620)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Acard.
 
@@ -277,6 +300,7 @@ config SATA_ACARD_AHCI
 config SATA_SIL24
 	tristate "Silicon Image 3124/3132 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Silicon Image 3124/3132 Serial ATA.
 
@@ -326,6 +350,7 @@ config PATA_OCTEON_CF
 config SATA_QSTOR
 	tristate "Pacific Digital SATA QStor support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Pacific Digital Serial ATA QStor.
 
@@ -334,6 +359,7 @@ config SATA_QSTOR
 config SATA_SX4
 	tristate "Promise SATA SX4 support (Experimental)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Promise Serial ATA SX4.
 
@@ -357,6 +383,7 @@ comment "SATA SFF controllers with BMDMA"
 config ATA_PIIX
 	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for ICH5/6/7/8 Serial ATA
 	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
@@ -368,6 +395,7 @@ config SATA_DWC
 	tristate "DesignWare Cores SATA support"
 	depends on DMADEVICES
 	select GENERIC_PHY
+	select SATA_HOST
 	help
 	  This option enables support for the on-chip SATA controller of the
 	  AppliedMicro processor 460EX.
@@ -398,6 +426,7 @@ config SATA_DWC_VDEBUG
 config SATA_HIGHBANK
 	tristate "Calxeda Highbank SATA support"
 	depends on ARCH_HIGHBANK || COMPILE_TEST
+	select SATA_HOST
 	help
 	  This option enables support for the Calxeda Highbank SoC's
 	  onboard SATA.
@@ -409,6 +438,7 @@ config SATA_MV
 	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 	select GENERIC_PHY
+	select SATA_HOST
 	help
 	  This option enables support for the Marvell Serial ATA family.
 	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
@@ -419,6 +449,7 @@ config SATA_MV
 config SATA_NV
 	tristate "NVIDIA SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for NVIDIA Serial ATA.
 
@@ -427,6 +458,7 @@ config SATA_NV
 config SATA_PROMISE
 	tristate "Promise SATA TX2/TX4 support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Promise Serial ATA TX2/TX4.
 
@@ -435,6 +467,7 @@ config SATA_PROMISE
 config SATA_RCAR
 	tristate "Renesas R-Car SATA support"
 	depends on ARCH_RENESAS || COMPILE_TEST
+	select SATA_HOST
 	help
 	  This option enables support for Renesas R-Car Serial ATA.
 
@@ -443,6 +476,7 @@ config SATA_RCAR
 config SATA_SIL
 	tristate "Silicon Image SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Silicon Image Serial ATA.
 
@@ -452,6 +486,7 @@ config SATA_SIS
 	tristate "SiS 964/965/966/180 SATA support"
 	depends on PCI
 	select PATA_SIS
+	select SATA_HOST
 	help
 	  This option enables support for SiS Serial ATA on
 	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
@@ -462,6 +497,7 @@ config SATA_SIS
 config SATA_SVW
 	tristate "ServerWorks Frodo / Apple K2 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Broadcom/Serverworks/Apple K2
 	  SATA support.
@@ -471,6 +507,7 @@ config SATA_SVW
 config SATA_ULI
 	tristate "ULi Electronics SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for ULi Electronics SATA.
 
@@ -479,6 +516,7 @@ config SATA_ULI
 config SATA_VIA
 	tristate "VIA SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for VIA Serial ATA.
 
@@ -487,6 +525,7 @@ config SATA_VIA
 config SATA_VITESSE
 	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 
@@ -1113,6 +1152,7 @@ config PATA_ACPI
 config ATA_GENERIC
 	tristate "Generic ATA support"
 	depends on PCI && ATA_BMDMA
+	select SATA_HOST
 	help
 	  This option enables support for generic BIOS configured
 	  ATA controllers via the new ATA layer
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index b5be6f43ec3f..17feff174f57 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -980,6 +980,7 @@ config SCSI_SYM53C8XX_MMIO
 config SCSI_IPR
 	tristate "IBM Power Linux RAID adapter support"
 	depends on PCI && SCSI && ATA
+	select SATA_HOST
 	select FW_LOADER
 	select IRQ_POLL
 	select SGL_ALLOC
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index 5c6a5eff2f8e..052ee3a26f6e 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -19,6 +19,7 @@ config SCSI_SAS_ATA
 	bool "ATA support for libsas (requires libata)"
 	depends on SCSI_SAS_LIBSAS
 	depends on ATA = y || ATA = SCSI_SAS_LIBSAS
+	select SATA_HOST
 	help
 		Builds in ATA support into libsas.  Will necessitate
 		the loading of libata along with libsas.
-- 
2.24.1




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux