* move sata_link_{debounce,resume}() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case (only one, for sata_link_resume() is needed) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32816 572 40 33428 8294 drivers/ata/libata-core.o after: 32724 572 40 33336 8238 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@xxxxxx> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> --- drivers/ata/libata-core.c | 138 -------------------------------------- drivers/ata/libata-sata.c | 138 ++++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 14 ++-- 3 files changed, 148 insertions(+), 142 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 13214ebd0e5c..4ca81ef7c8bd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3485,144 +3485,6 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, } EXPORT_SYMBOL_GPL(ata_wait_after_reset); -/** - * sata_link_debounce - debounce SATA phy status - * @link: ATA link to debounce SATA phy status for - * @params: timing parameters { interval, duration, timeout } in msec - * @deadline: deadline jiffies for the operation - * - * Make sure SStatus of @link reaches stable state, determined by - * holding the same value where DET is not 1 for @duration polled - * every @interval, before @timeout. Timeout constraints the - * beginning of the stable state. Because DET gets stuck at 1 on - * some controllers after hot unplugging, this functions waits - * until timeout then returns 0 if DET is stable at 1. - * - * @timeout is further limited by @deadline. The sooner of the - * two is used. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int sata_link_debounce(struct ata_link *link, const unsigned long *params, - unsigned long deadline) -{ - unsigned long interval = params[0]; - unsigned long duration = params[1]; - unsigned long last_jiffies, t; - u32 last, cur; - int rc; - - t = ata_deadline(jiffies, params[2]); - if (time_before(t, deadline)) - deadline = t; - - if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) - return rc; - cur &= 0xf; - - last = cur; - last_jiffies = jiffies; - - while (1) { - ata_msleep(link->ap, interval); - if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) - return rc; - cur &= 0xf; - - /* DET stable? */ - if (cur == last) { - if (cur == 1 && time_before(jiffies, deadline)) - continue; - if (time_after(jiffies, - ata_deadline(last_jiffies, duration))) - return 0; - continue; - } - - /* unstable, start over */ - last = cur; - last_jiffies = jiffies; - - /* Check deadline. If debouncing failed, return - * -EPIPE to tell upper layer to lower link speed. - */ - if (time_after(jiffies, deadline)) - return -EPIPE; - } -} -EXPORT_SYMBOL_GPL(sata_link_debounce); - -/** - * sata_link_resume - resume SATA link - * @link: ATA link to resume SATA - * @params: timing parameters { interval, duration, timeout } in msec - * @deadline: deadline jiffies for the operation - * - * Resume SATA phy @link and debounce it. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int sata_link_resume(struct ata_link *link, const unsigned long *params, - unsigned long deadline) -{ - int tries = ATA_LINK_RESUME_TRIES; - u32 scontrol, serror; - int rc; - - if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) - return rc; - - /* - * Writes to SControl sometimes get ignored under certain - * controllers (ata_piix SIDPR). Make sure DET actually is - * cleared. - */ - do { - scontrol = (scontrol & 0x0f0) | 0x300; - if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) - return rc; - /* - * Some PHYs react badly if SStatus is pounded - * immediately after resuming. Delay 200ms before - * debouncing. - */ - if (!(link->flags & ATA_LFLAG_NO_DB_DELAY)) - ata_msleep(link->ap, 200); - - /* is SControl restored correctly? */ - if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) - return rc; - } while ((scontrol & 0xf0f) != 0x300 && --tries); - - if ((scontrol & 0xf0f) != 0x300) { - ata_link_warn(link, "failed to resume link (SControl %X)\n", - scontrol); - return 0; - } - - if (tries < ATA_LINK_RESUME_TRIES) - ata_link_warn(link, "link resume succeeded after %d retries\n", - ATA_LINK_RESUME_TRIES - tries); - - if ((rc = sata_link_debounce(link, params, deadline))) - return rc; - - /* clear SError, some PHYs require this even for SRST to work */ - if (!(rc = sata_scr_read(link, SCR_ERROR, &serror))) - rc = sata_scr_write(link, SCR_ERROR, serror); - - return rc != -EINVAL ? rc : 0; -} -EXPORT_SYMBOL_GPL(sata_link_resume); - /** * ata_std_prereset - prepare for reset * @link: ATA link to be reset diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index d66afdc33d54..34852fced999 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -196,6 +196,144 @@ void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) } EXPORT_SYMBOL_GPL(ata_tf_from_fis); +/** + * sata_link_debounce - debounce SATA phy status + * @link: ATA link to debounce SATA phy status for + * @params: timing parameters { interval, duration, timeout } in msec + * @deadline: deadline jiffies for the operation + * + * Make sure SStatus of @link reaches stable state, determined by + * holding the same value where DET is not 1 for @duration polled + * every @interval, before @timeout. Timeout constraints the + * beginning of the stable state. Because DET gets stuck at 1 on + * some controllers after hot unplugging, this functions waits + * until timeout then returns 0 if DET is stable at 1. + * + * @timeout is further limited by @deadline. The sooner of the + * two is used. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_link_debounce(struct ata_link *link, const unsigned long *params, + unsigned long deadline) +{ + unsigned long interval = params[0]; + unsigned long duration = params[1]; + unsigned long last_jiffies, t; + u32 last, cur; + int rc; + + t = ata_deadline(jiffies, params[2]); + if (time_before(t, deadline)) + deadline = t; + + if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + last = cur; + last_jiffies = jiffies; + + while (1) { + ata_msleep(link->ap, interval); + if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + /* DET stable? */ + if (cur == last) { + if (cur == 1 && time_before(jiffies, deadline)) + continue; + if (time_after(jiffies, + ata_deadline(last_jiffies, duration))) + return 0; + continue; + } + + /* unstable, start over */ + last = cur; + last_jiffies = jiffies; + + /* Check deadline. If debouncing failed, return + * -EPIPE to tell upper layer to lower link speed. + */ + if (time_after(jiffies, deadline)) + return -EPIPE; + } +} +EXPORT_SYMBOL_GPL(sata_link_debounce); + +/** + * sata_link_resume - resume SATA link + * @link: ATA link to resume SATA + * @params: timing parameters { interval, duration, timeout } in msec + * @deadline: deadline jiffies for the operation + * + * Resume SATA phy @link and debounce it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_link_resume(struct ata_link *link, const unsigned long *params, + unsigned long deadline) +{ + int tries = ATA_LINK_RESUME_TRIES; + u32 scontrol, serror; + int rc; + + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) + return rc; + + /* + * Writes to SControl sometimes get ignored under certain + * controllers (ata_piix SIDPR). Make sure DET actually is + * cleared. + */ + do { + scontrol = (scontrol & 0x0f0) | 0x300; + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) + return rc; + /* + * Some PHYs react badly if SStatus is pounded + * immediately after resuming. Delay 200ms before + * debouncing. + */ + if (!(link->flags & ATA_LFLAG_NO_DB_DELAY)) + ata_msleep(link->ap, 200); + + /* is SControl restored correctly? */ + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) + return rc; + } while ((scontrol & 0xf0f) != 0x300 && --tries); + + if ((scontrol & 0xf0f) != 0x300) { + ata_link_warn(link, "failed to resume link (SControl %X)\n", + scontrol); + return 0; + } + + if (tries < ATA_LINK_RESUME_TRIES) + ata_link_warn(link, "link resume succeeded after %d retries\n", + ATA_LINK_RESUME_TRIES - tries); + + if ((rc = sata_link_debounce(link, params, deadline))) + return rc; + + /* clear SError, some PHYs require this even for SRST to work */ + if (!(rc = sata_scr_read(link, SCR_ERROR, &serror))) + rc = sata_scr_write(link, SCR_ERROR, serror); + + return rc != -EINVAL ? rc : 0; +} +EXPORT_SYMBOL_GPL(sata_link_resume); + /** * sata_link_scr_lpm - manipulate SControl IPM and SPM fields * @link: ATA link to manipulate SControl for diff --git a/include/linux/libata.h b/include/linux/libata.h index f0817a8f1e3f..b05538d06919 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1077,10 +1077,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap) extern int ata_std_prereset(struct ata_link *link, unsigned long deadline); extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)); -extern int sata_link_debounce(struct ata_link *link, - const unsigned long *params, unsigned long deadline); -extern int sata_link_resume(struct ata_link *link, const unsigned long *params, - unsigned long deadline); extern int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, unsigned long deadline, bool *online, int (*check_ready)(struct ata_link *)); @@ -1194,6 +1190,8 @@ extern int sata_scr_read(struct ata_link *link, int reg, u32 *val); extern int sata_scr_write(struct ata_link *link, int reg, u32 val); extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val); extern int sata_set_spd(struct ata_link *link); +extern int sata_link_resume(struct ata_link *link, const unsigned long *params, + unsigned long deadline); #else static inline int sata_scr_valid(struct ata_link *link) { return 0; } static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val) @@ -1209,7 +1207,15 @@ static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) return -EOPNOTSUPP; } static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; } +static inline int sata_link_resume(struct ata_link *link, + const unsigned long *params, + unsigned long deadline) +{ + return -EOPNOTSUPP; +} #endif +extern int sata_link_debounce(struct ata_link *link, + const unsigned long *params, unsigned long deadline); extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, bool spm_wakeup); extern int ata_slave_link_init(struct ata_port *ap); -- 2.24.1