Hi Jonathan, Gentle ping. Can we get your ACK to merge this patch through MIPS (or IDE) tree? Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics On 1/16/20 1:29 PM, Bartlomiej Zolnierkiewicz wrote: > Since the au1xxx-ide IDE host driver is no longer needed its documentation > can be removed. > > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> > --- > Documentation/mips/au1xxx_ide.rst | 130 ------------------------------ > Documentation/mips/index.rst | 2 - > 2 files changed, 132 deletions(-) > delete mode 100644 Documentation/mips/au1xxx_ide.rst > > diff --git a/Documentation/mips/au1xxx_ide.rst b/Documentation/mips/au1xxx_ide.rst > deleted file mode 100644 > index 2f9c2cff6738..000000000000 > --- a/Documentation/mips/au1xxx_ide.rst > +++ /dev/null > @@ -1,130 +0,0 @@ > -.. include:: <isonum.txt> > - > -====================== > -MIPS AU1XXX IDE driver > -====================== > - > -Released 2005-07-15 > - > -About > -===== > - > -This file describes the 'drivers/ide/au1xxx-ide.c', related files and the > -services they provide. > - > -If you are short in patience and just want to know how to add your hard disc to > -the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST' > -section. > - > - > -License > -======= > - > -:Copyright: |copy| 2003-2005 AMD, Personal Connectivity Solutions > - > -This program is free software; you can redistribute it and/or modify it under > -the terms of the GNU General Public License as published by the Free Software > -Foundation; either version 2 of the License, or (at your option) any later > -version. > - > -THIS SOFTWARE IS PROVIDED ``AS IS`` AND ANY EXPRESS OR IMPLIED WARRANTIES, > -INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND > -FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR > -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF > -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS > -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN > -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) > -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE > -POSSIBILITY OF SUCH DAMAGE. > - > -You should have received a copy of the GNU General Public License along with > -this program; if not, write to the Free Software Foundation, Inc., > -675 Mass Ave, Cambridge, MA 02139, USA. > - > -Note: > - for more information, please refer "AMD Alchemy Au1200/Au1550 IDE > - Interface and Linux Device Driver" Application Note. > - > - > -Files, Configs and Compatibility > -================================ > - > -Two files are introduced: > - > - a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h' > - contains : struct _auide_hwif > - > - - timing parameters for PIO mode 0/1/2/3/4 > - - timing parameters for MWDMA 0/1/2 > - > - b) 'drivers/ide/mips/au1xxx-ide.c' > - contains the functionality of the AU1XXX IDE driver > - > -Following extra configs variables are introduced: > - > - CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA > - - enable the PIO+DBDMA mode > - CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA > - - enable the MWDMA mode > - > - > -Supported IDE Modes > -=================== > - > -The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all > -MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode. > - > -To change the PIO mode use the program hdparm with option -p, e.g. > -'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option > --X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0. > - > - > -Performance Configurations > -========================== > - > -If the used system doesn't need USB support enable the following kernel > -configs:: > - > - CONFIG_IDE=y > - CONFIG_BLK_DEV_IDE=y > - CONFIG_IDE_GENERIC=y > - CONFIG_BLK_DEV_IDEPCI=y > - CONFIG_BLK_DEV_GENERIC=y > - CONFIG_BLK_DEV_IDEDMA_PCI=y > - CONFIG_BLK_DEV_IDE_AU1XXX=y > - CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y > - CONFIG_BLK_DEV_IDEDMA=y > - > -Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable > -the burst support on DBDMA controller. > - > -If the used system need the USB support enable the following kernel configs for > -high IDE to USB throughput. > - > -:: > - > - CONFIG_IDE_GENERIC=y > - CONFIG_BLK_DEV_IDEPCI=y > - CONFIG_BLK_DEV_GENERIC=y > - CONFIG_BLK_DEV_IDEDMA_PCI=y > - CONFIG_BLK_DEV_IDE_AU1XXX=y > - CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y > - CONFIG_BLK_DEV_IDEDMA=y > - > -Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to > -disable the burst support on DBDMA controller. > - > - > -Acknowledgments > -=============== > - > -These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX > -IDE driver from AMD. > - > -Additional input also from: > -Matthias Lenk <matthias.lenk@xxxxxxx> > - > -Happy hacking! > - > -Enrico Walther <enrico.walther@xxxxxxx> > diff --git a/Documentation/mips/index.rst b/Documentation/mips/index.rst > index a93c2f65884c..d5ad8c00f0bd 100644 > --- a/Documentation/mips/index.rst > +++ b/Documentation/mips/index.rst > @@ -10,8 +10,6 @@ MIPS-specific Documentation > > ingenic-tcu > > - au1xxx_ide > - > .. only:: subproject and html > > Indices >
