Re: [PATCH 28/46] libata-scsi: drop DPRINTK calls for cdb translation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/4/20 5:55 PM, Hannes Reinecke wrote:
> Drop DPRINTK calls for cdb translation as they are already covered
> by other traces, and convert the DPRINTK calls in ata_scsi_hotplug()
> to ata_port_dbg() calls.
> 
> Signed-off-by: Hannes Reinecke <hare@xxxxxxx>

Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> ---
>  drivers/ata/libata-scsi.c | 20 +++-----------------
>  1 file changed, 3 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index eb2eb599e602..91b69ebef268 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -1761,9 +1761,6 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
>  		head  = track % dev->heads;
>  		sect  = (u32)block % dev->sectors + 1;
>  
> -		DPRINTK("block %u track %u cyl %u head %u sect %u\n",
> -			(u32)block, track, cyl, head, sect);
> -
>  		/* Check whether the converted CHS can fit.
>  		   Cylinder: 0-65535
>  		   Head: 0-15
> @@ -1886,7 +1883,6 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
>  			goto invalid_fld;
>  		break;
>  	default:
> -		DPRINTK("no-byte command\n");
>  		fp = 0;
>  		goto invalid_fld;
>  	}
> @@ -2040,7 +2036,6 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
>  early_finish:
>  	ata_qc_free(qc);
>  	cmd->scsi_done(cmd);
> -	DPRINTK("EXIT - early finish (good or error)\n");
>  	return 0;
>  
>  err_did:
> @@ -2048,12 +2043,10 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
>  	cmd->result = (DID_ERROR << 16);
>  	cmd->scsi_done(cmd);
>  err_mem:
> -	DPRINTK("EXIT - internal\n");
>  	return 0;
>  
>  defer:
>  	ata_qc_free(qc);
> -	DPRINTK("EXIT - defer\n");
>  	if (rc == ATA_DEFER_LINK)
>  		return SCSI_MLQUEUE_DEVICE_BUSY;
>  	else
> @@ -2820,8 +2813,6 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
>  	struct ata_port *ap = qc->ap;
>  	struct scsi_cmnd *cmd = qc->scsicmd;
>  
> -	DPRINTK("ATAPI request sense\n");
> -
>  	memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
>  
>  #ifdef CONFIG_ATA_SFF
> @@ -2860,8 +2851,6 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
>  	qc->complete_fn = atapi_sense_complete;
>  
>  	ata_qc_issue(qc);
> -
> -	DPRINTK("EXIT\n");
>  }
>  
>  /*
> @@ -2971,7 +2960,6 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
>  	qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
>  	if (scmd->sc_data_direction == DMA_TO_DEVICE) {
>  		qc->tf.flags |= ATA_TFLAG_WRITE;
> -		DPRINTK("direction: write\n");
>  	}
>  
>  	qc->tf.command = ATA_CMD_PACKET;
> @@ -4355,8 +4343,6 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
>  	return rc;
>  
>   bad_cdb_len:
> -	DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n",
> -		scmd->cmd_len, scsi_op, dev->cdb_len);
>  	scmd->result = DID_ERROR << 16;
>  	scmd->scsi_done(scmd);
>  	return 0;
> @@ -4796,11 +4782,11 @@ void ata_scsi_hotplug(struct work_struct *work)
>  	int i;
>  
>  	if (ap->pflags & ATA_PFLAG_UNLOADING) {
> -		DPRINTK("ENTER/EXIT - unloading\n");
> +		ata_port_dbg(ap, "unloading\n");
>  		return;
>  	}
>  
> -	DPRINTK("ENTER\n");
> +	ata_port_dbg(ap, "ENTER\n");
>  	mutex_lock(&ap->scsi_scan_mutex);
>  
>  	/* Unplug detached devices.  We cannot use link iterator here
> @@ -4816,7 +4802,7 @@ void ata_scsi_hotplug(struct work_struct *work)
>  	ata_scsi_scan_host(ap, 0);
>  
>  	mutex_unlock(&ap->scsi_scan_mutex);
> -	DPRINTK("EXIT\n");
> +	ata_port_dbg(ap, "EXIT\n");
>  }
>  
>  /**
> 



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux