On Monday 06 January 2020 09:16:05 Sascha Hauer wrote: > On Wed, Dec 25, 2019 at 07:18:40PM +0100, Pali Rohár wrote: > > Hello Sascha! > > > > On Friday 13 December 2019 09:04:08 Sascha Hauer wrote: > > > ata_qc_complete_multiple() is called with a mask of the still active > > > tags. > > > > > > mv_sata doesn't have this information directly and instead calculates > > > the still active tags from the started tags (ap->qc_active) and the > > > finished tags as (ap->qc_active ^ done_mask) > > > > > > Since 28361c40368 the hw_tag and tag are no longer the same and the > > > equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is > > > initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is > > > started and this will be in done_mask on completion. ap->qc_active ^ > > > done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as > > > the internal tag will never be reported as completed. > > > > > > This is fixed by introducing ata_qc_get_active() which returns the > > > active hardware tags and calling it where appropriate. > > > > > > This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same > > > problem. There is another case in sata_nv that most likely needs fixing > > > as well, but this looks a little different, so I wasn't confident enough > > > to change that. > > > > I can confirm that sata_nv.ko does not work in 4.18 (and new) kernel > > version correctly. More details are in email: > > > > https://lore.kernel.org/linux-ide/20191225180824.bql2o5whougii4ch@pali/T/ > > > > I tried this patch and it fixed above problems with sata_nv.ko. It just > > needs small modification (see below). > > > > So you can add my: > > > > Tested-by: Pali Rohár <pali.rohar@xxxxxxxxx> > > > > And I hope that patch would be backported to 4.18 and 4.19 stable > > branches soon as distributions kernels are broken for machines with > > these nvidia sata controllers. > > > > Anyway, what is that another case in sata_nv which needs to be fixed > > too? > > It's in nv_swncq_sdbfis(). Here we have: > > sactive = readl(pp->sactive_block); > done_mask = pp->qc_active ^ sactive; > > pp->qc_active &= ~done_mask; > pp->dhfis_bits &= ~done_mask; > pp->dmafis_bits &= ~done_mask; > pp->sdbfis_bits |= done_mask; > ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); > > Sascha Ok. Are you going to fix also this case? -- Pali Rohár pali.rohar@xxxxxxxxx
