Hi, On 12/8/19 9:21 PM, Guenter Roeck wrote: > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 13a6b4afb4b3..4c63eb7ba96a 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1346,6 +1346,16 @@ config SENSORS_RASPBERRYPI_HWMON > This driver can also be built as a module. If so, the module > will be called raspberrypi-hwmon. > > +config SENSORS_SATATEMP > + tristate "SATA hard disk drives with temperature sensors" > + depends on SCSI && ATA > + help > + If you say yes you get support for the temperature sensor on > + SATA hard disk drives. > + > + This driver can also be built as a module. If so, the module > + will be called smarttemp. Makefile seems to say satatemp. > + > config SENSORS_SHT15 > tristate "Sensiron humidity and temperature sensors. SHT15 and compat." > depends on GPIOLIB || COMPILE_TEST > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 40c036ea45e6..fe55b8f76af9 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -148,6 +148,7 @@ obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o > obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o > obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o > obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o > +obj-$(CONFIG_SENSORS_SATATEMP) += satatemp.o > obj-$(CONFIG_SENSORS_SHT15) += sht15.o > obj-$(CONFIG_SENSORS_SHT21) += sht21.o > obj-$(CONFIG_SENSORS_SHT3x) += sht3x.o -- ~Randy
