Re: [PATCH v2 02/10] ata: ahci: Support per-port interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 06-03-19 11:21, Miquel Raynal wrote:
Right now the ATA core only allows IPs to use a single interrupt. Some
of them (for instance the Armada-CP110 one) actually has one interrupt
per port. Add some logic to support such situation.

We consider that either there is one single interrupt declared in the
main IP node, or there are per-port interrupts, each of them being
declared in the port sub-nodes.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
  drivers/ata/acard-ahci.c       |  2 +-
  drivers/ata/ahci.c             |  8 +++-
  drivers/ata/ahci.h             |  3 +-
  drivers/ata/libahci.c          |  2 +-
  drivers/ata/libahci_platform.c | 67 ++++++++++++++++++++++++++++------
  drivers/ata/sata_highbank.c    |  2 +-
  6 files changed, 68 insertions(+), 16 deletions(-)

diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 583e366be7e2..9414b81e994c 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -434,7 +434,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
  	if (!hpriv)
  		return -ENOMEM;
- hpriv->irq = pdev->irq;
+	hpriv->irqs[0] = pdev->irq;
  	hpriv->flags |= (unsigned long)pi.private_data;
if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 021ce46e2e57..bc37a34fa043 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1817,7 +1817,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
  		/* legacy intx interrupts */
  		pci_intx(pdev, 1);
  	}
-	hpriv->irq = pci_irq_vector(pdev, 0);
+
+	hpriv->irqs = devm_kzalloc(dev, sizeof(*hpriv->irqs) * n_ports,
+				   GFP_KERNEL);
+	if (!hpriv->irqs)
+		return -ENOMEM;
+
+	hpriv->irqs[0] = pci_irq_vector(pdev, 0);
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
  		host->flags |= ATA_HOST_PARALLEL_SCAN;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 8810475f307a..f569f6a0d9f5 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -363,7 +363,7 @@ struct ahci_host_priv {
  	struct phy		**phys;
  	unsigned		nports;		/* Number of ports */
  	void			*plat_data;	/* Other platform data */
-	unsigned int		irq;		/* interrupt line */
+	unsigned int		*irqs;		/* interrupt line(s) */
  	/*
  	 * Optional ahci_start_engine override, if not set this gets set to the
  	 * default ahci_start_engine during ahci_save_initial_config, this can
@@ -434,6 +434,7 @@ void ahci_print_info(struct ata_host *host, const char *scc_s);
  int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht);
  void ahci_error_handler(struct ata_port *ap);
  u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked);
+int ahci_get_per_port_irq_vector(struct ata_host *host, int port);
static inline void __iomem *__ahci_port_base(struct ata_host *host,
  					     unsigned int port_no)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 66d4906a5013..25970138a65a 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2602,7 +2602,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host,
  int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
  {
  	struct ahci_host_priv *hpriv = host->private_data;
-	int irq = hpriv->irq;
+	int irq = hpriv->irqs[0];
  	int rc;
if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 81b1a3332ed6..673d355a59ab 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -24,6 +24,7 @@
  #include <linux/ahci_platform.h>
  #include <linux/phy/phy.h>
  #include <linux/pm_runtime.h>
+#include <linux/of_irq.h>
  #include <linux/of_platform.h>
  #include <linux/reset.h>
  #include "ahci.h"
@@ -95,6 +96,14 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
  	}
  }
+int ahci_get_per_port_irq_vector(struct ata_host *host, int port)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	return hpriv->irqs[port];
+}
+EXPORT_SYMBOL_GPL(ahci_get_per_port_irq_vector);
+
  /**
   * ahci_platform_enable_clks - Enable platform clocks
   * @hpriv: host private area to store config values
@@ -385,6 +394,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
   *    or for non devicetree enabled platforms a single clock
   * 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
   * 5) phys (optional)
+ * 6) interrupt(s)
   *
   * RETURNS:
   * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
@@ -396,7 +406,7 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
  	struct ahci_host_priv *hpriv;
  	struct clk *clk;
  	struct device_node *child;
-	int i, enabled_ports = 0, rc = -ENOMEM, child_nodes;
+	int i, enabled_ports = 0, rc = -ENOMEM, child_nodes, ctrl_irq;
  	u32 mask_port_map = 0;
if (!devres_open_group(dev, NULL, GFP_KERNEL))
@@ -489,10 +499,30 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
  		goto err_out;
  	}
+ hpriv->irqs = devm_kzalloc(dev, sizeof(*hpriv->irqs) * hpriv->nports,
+				   GFP_KERNEL);
+	if (!hpriv->irqs) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
+	ctrl_irq = platform_get_irq(pdev, 0);
+	if (ctrl_irq < 0) {
+		if (ctrl_irq == -EPROBE_DEFER) {
+			rc = ctrl_irq;
+			goto err_out;
+		}
+		ctrl_irq = 0;
+	}
+
+	if (ctrl_irq > 0)
+		hpriv->irqs[0] = ctrl_irq;
+
  	if (child_nodes) {
  		for_each_child_of_node(dev->of_node, child) {
  			u32 port;
  			struct platform_device *port_dev __maybe_unused;
+			int port_irq;
if (!of_device_is_available(child))
  				continue;
@@ -521,6 +551,18 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
  			}
  #endif
+ if (!ctrl_irq) {
+				port_irq = of_irq_get(child, 0);
+				if (!port_irq)
+					port_irq = -EINVAL;
+				if (port_irq < 0) {
+					rc = port_irq;
+					goto err_out;
+				}
+
+				hpriv->irqs[port] = port_irq;
+			}
+
  			rc = ahci_platform_get_phy(hpriv, port, dev, child);
  			if (rc)
  				goto err_out;
@@ -548,6 +590,18 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
  		if (rc == -EPROBE_DEFER)
  			goto err_out;
  	}
+
+	if (!ctrl_irq && !enabled_ports) {
+		dev_err(&pdev->dev, "No IRQ defined\n");
+		rc = -ENODEV;
+		goto err_out;
+	}
+
+	if (enabled_ports > 1) {
+		hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
+		hpriv->get_irq_vector = ahci_get_per_port_irq_vector;
+	}
+

I believe that the "if (enabled_ports > 1)" here needs to be:

	if (!ctrl_irq && enabled_ports > 1) {

Otherwise existing boards which use a single irq defined at the
main of_node level for the device and have defined more then 1
child-node in their DTB will now get AHCI_HFLAG_MULTI_MSI set,
but they will only have hpriv->irqs[0] set to the ctrl_irq
leading to returning of 0 as irq from ahci_get_per_port_irq_vector
for the other ports, which is wrong.

Otherwise this patch looks good to me, so with this fixed
(assuming you agree) you may add my:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

to the next version of this patch.

The rest of the patches in this series are outside my area
of expertise.

Regards.

Hans




  	pm_runtime_enable(dev);
  	pm_runtime_get_sync(dev);
  	hpriv->got_runtime_pm = true;
@@ -584,16 +638,7 @@ int ahci_platform_init_host(struct platform_device *pdev,
  	struct ata_port_info pi = *pi_template;
  	const struct ata_port_info *ppi[] = { &pi, NULL };
  	struct ata_host *host;
-	int i, irq, n_ports, rc;
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		if (irq != -EPROBE_DEFER)
-			dev_err(dev, "no irq\n");
-		return irq;
-	}
-
-	hpriv->irq = irq;
+	int i, n_ports, rc;
/* prepare host */
  	pi.private_data = (void *)(unsigned long)hpriv->flags;
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index c8fc9280d6e4..dcfdab20021b 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -496,7 +496,7 @@ static int ahci_highbank_probe(struct platform_device *pdev)
  		return -ENOMEM;
  	}
- hpriv->irq = irq;
+	hpriv->irqs[0] = irq;
  	hpriv->flags |= (unsigned long)pi.private_data;
hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux