Hi Hans, Hans de Goede <hdegoede@xxxxxxxxxx> wrote on Fri, 22 Feb 2019 16:26:01 +0100: > Hi, > > On 2/22/19 3:53 PM, Miquel Raynal wrote: > > Right now the ATA core only allows IPs to use a single interrupt. Some > > of them (for instance the Armada-CP110 one) actually has one interrupt > > per port. Add some logic to support such situation. > > > > We consider that either there is one single interrupt declared in the > > main IP node, or there are per-port interrupts, each of them being > > declared in the port sub-nodes. > > > > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > > --- > > drivers/ata/acard-ahci.c | 2 +- > > drivers/ata/ahci.c | 2 +- > > drivers/ata/ahci.h | 3 +- > > drivers/ata/libahci.c | 2 +- > > drivers/ata/libahci_platform.c | 66 ++++++++++++++++++++++++++++------ > > drivers/ata/sata_highbank.c | 2 +- > > 6 files changed, 61 insertions(+), 16 deletions(-) > > > > diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c > > index 583e366be7e2..9414b81e994c 100644 > > --- a/drivers/ata/acard-ahci.c > > +++ b/drivers/ata/acard-ahci.c > > @@ -434,7 +434,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id > > if (!hpriv) > > return -ENOMEM; > > > - hpriv->irq = pdev->irq; > > + hpriv->irqs[0] = pdev->irq; > > hpriv->flags |= (unsigned long)pi.private_data; > > > What code-path is going to alloc hpriv->irqs for drivers using this code-path > which are not using libahci_platform .c ? I don't understand the question (or the remark behind the question), can you explain a little bit more what you have in mind? Thanks, Miquèl
