RE: [PATCH 1/2] ahci: qoriq: add lx2160 platforms support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Peng Ma
> Sent: Thursday, January 10, 2019 4:32 AM
> To: Peng Ma <peng.ma@xxxxxxx>; shawnguo@xxxxxxxxxx;
> axboe@xxxxxxxxx
> Cc: Leo Li <leoyang.li@xxxxxxx>; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-
> ide@xxxxxxxxxxxxxxx; Andy Tang <andy.tang@xxxxxxx>
> Subject: RE: [PATCH 1/2] ahci: qoriq: add lx2160 platforms support
> 
> Hi Jens,
> 
> 	I send the sata patchs to the upstream patchwork
> with ./scripts/get_maintainer.pl, but I find my patch on
> http://patchwork.ozlabs.org/project/linux-ide/list/ , I saw the MAINTAINERS,
> the driver/ata/* should be on https://patchwork.kernel.org/project/linux-
> block/list/ . could you please help me what the patchwork is right.

Peng,

The patchwork used is related to the mailing list which you send the patch to not the maintainer's git tree used.  Since the MAINTAINERS file says drivers/ata should use linux-ide mailing list, patches will appear in linux-ide patchwork.

Regards,
Leo

> 	Thanks a lot.
> 
> Best Regards,
> Peng
> 
> >-----Original Message-----
> >From: Peng Ma <peng.ma@xxxxxxx>
> >Sent: 2019年1月10日 18:06
> >To: shawnguo@xxxxxxxxxx; axboe@xxxxxxxxx
> >Cc: Leo Li <leoyang.li@xxxxxxx>; robh+dt@xxxxxxxxxx;
> >mark.rutland@xxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> >devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> >linux-ide@xxxxxxxxxxxxxxx; Peng Ma <peng.ma@xxxxxxx>
> >Subject: [PATCH 1/2] ahci: qoriq: add lx2160 platforms support
> >
> >Lx2160a is a new introduced soc which supports ATA3.0 and Clean up some
> >code
> >
> >Signed-off-by: Peng Ma <peng.ma@xxxxxxx>
> >---
> > drivers/ata/ahci_qoriq.c |   44 ++++++++++++--------------------------------
> > 1 files changed, 12 insertions(+), 32 deletions(-)
> >
> >diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index
> >ce59253..1994bf2 100644
> >--- a/drivers/ata/ahci_qoriq.c
> >+++ b/drivers/ata/ahci_qoriq.c
> >@@ -57,7 +57,7 @@ enum ahci_qoriq_type {
> > 	AHCI_LS2080A,
> > 	AHCI_LS1046A,
> > 	AHCI_LS1088A,
> >-	AHCI_LS2088A,
> >+	AHCI_LX2160A,
> > };
> >
> > struct ahci_qoriq_priv {
> >@@ -73,7 +73,7 @@ struct ahci_qoriq_priv {
> > 	{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
> > 	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
> > 	{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
> >-	{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
> >+	{ .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A},
> > 	{},
> > };
> > MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match); @@ -174,12 +174,10
> @@
> >static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
> > 		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
> > 		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
> > 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> >-		if (qpriv->is_dmacoherent)
> >-			writel(AHCI_PORT_AXICC_CFG,
> >-					reg_base + LS1021A_AXICC_ADDR);
> > 		break;
> >
> > 	case AHCI_LS1043A:
> >+	case AHCI_LS1046A:
> > 		if (!qpriv->ecc_addr)
> > 			return -EINVAL;
> > 		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2, @@ -
> 188,8
> >+186,6 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
> > 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
> > 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
> > 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> >-		if (qpriv->is_dmacoherent)
> >-			writel(AHCI_PORT_AXICC_CFG, reg_base +
> PORT_AXICC);
> > 		break;
> >
> > 	case AHCI_LS2080A:
> >@@ -197,24 +193,10 @@ static int ahci_qoriq_phy_init(struct
> >ahci_host_priv
> >*hpriv)
> > 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
> > 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
> > 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> >-		if (qpriv->is_dmacoherent)
> >-			writel(AHCI_PORT_AXICC_CFG, reg_base +
> PORT_AXICC);
> >-		break;
> >-
> >-	case AHCI_LS1046A:
> >-		if (!qpriv->ecc_addr)
> >-			return -EINVAL;
> >-		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
> >-				qpriv->ecc_addr);
> >-		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> >-		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
> >-		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
> >-		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> >-		if (qpriv->is_dmacoherent)
> >-			writel(AHCI_PORT_AXICC_CFG, reg_base +
> PORT_AXICC);
> > 		break;
> >
> > 	case AHCI_LS1088A:
> >+	case AHCI_LX2160A:
> > 		if (!qpriv->ecc_addr)
> > 			return -EINVAL;
> > 		writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A, @@ -
> 223,18
> >+205,16 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
> > 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
> > 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
> > 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> >-		if (qpriv->is_dmacoherent)
> >-			writel(AHCI_PORT_AXICC_CFG, reg_base +
> PORT_AXICC);
> > 		break;
> >+	}
> >
> >-	case AHCI_LS2088A:
> >-		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> >-		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
> >-		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
> >-		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> >-		if (qpriv->is_dmacoherent)
> >-			writel(AHCI_PORT_AXICC_CFG, reg_base +
> PORT_AXICC);
> >-		break;
> >+	if (qpriv->is_dmacoherent) {
> >+		if (qpriv->type == AHCI_LS1021A)
> >+			writel(AHCI_PORT_AXICC_CFG,
> >+			       reg_base + LS1021A_AXICC_ADDR);
> >+		else
> >+			writel(AHCI_PORT_AXICC_CFG,
> >+			       reg_base + PORT_AXICC);
> > 	}
> >
> > 	return 0;
> >--
> >1.7.1





[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux