On Mon, Oct 29, 2018 at 08:50:25AM -0600, Jens Axboe wrote: > On 10/29/18 6:00 AM, Ming Lei wrote: > > On Thu, Oct 25, 2018 at 03:10:11PM -0600, Jens Axboe wrote: > >> The first round of this went into 4.20-rc, but we've still some of > >> them pending. This patch series converts the remaining drivers to > >> blk-mq. The ones that support dual paths (like SCSI and DM) have > >> the non-mq path removed. At the end, legacy IO code and schedulers > >> are killed off. > >> > >> This patch series is on top of my for-linus branch. It can also > >> be bound in my mq-conversions branch. > >> > >> Documentation/block/biodoc.txt | 88 - > >> Documentation/block/cfq-iosched.txt | 291 -- > >> Documentation/scsi/scsi-parameters.txt | 5 - > >> block/Kconfig | 6 - > >> block/Kconfig.iosched | 61 - > >> block/Makefile | 5 +- > >> block/bfq-iosched.c | 1 - > >> block/blk-cgroup.c | 55 - > >> block/blk-core.c | 1860 +----------- > >> block/blk-exec.c | 20 +- > >> block/blk-flush.c | 154 +- > >> block/blk-ioc.c | 46 +- > >> block/blk-merge.c | 35 +- > >> block/blk-mq-debugfs.c | 2 - > >> block/blk-mq-tag.c | 6 +- > >> block/blk-mq.c | 13 +- > >> block/blk-settings.c | 49 - > >> block/blk-softirq.c | 20 - > >> block/blk-sysfs.c | 39 +- > >> block/blk-tag.c | 378 --- > >> block/blk-timeout.c | 99 +- > >> block/blk-wbt.c | 3 +- > >> block/blk.h | 60 +- > >> block/bsg-lib.c | 131 +- > >> block/cfq-iosched.c | 4916 -------------------------------- > >> block/deadline-iosched.c | 560 ---- > >> block/elevator.c | 447 +-- > >> block/kyber-iosched.c | 1 - > >> block/mq-deadline.c | 1 - > >> block/noop-iosched.c | 124 - > >> drivers/block/sunvdc.c | 149 +- > >> drivers/ide/ide-atapi.c | 25 +- > >> drivers/ide/ide-cd.c | 175 +- > >> drivers/ide/ide-disk.c | 5 +- > >> drivers/ide/ide-io.c | 101 +- > >> drivers/ide/ide-park.c | 4 +- > >> drivers/ide/ide-pm.c | 28 +- > >> drivers/ide/ide-probe.c | 68 +- > >> drivers/infiniband/ulp/srp/ib_srp.c | 7 - > >> drivers/md/Kconfig | 11 - > >> drivers/md/dm-core.h | 10 - > >> drivers/md/dm-mpath.c | 18 +- > >> drivers/md/dm-rq.c | 293 +- > >> drivers/md/dm-rq.h | 4 - > >> drivers/md/dm-sysfs.c | 3 +- > >> drivers/md/dm-table.c | 36 +- > >> drivers/md/dm.c | 21 +- > >> drivers/md/dm.h | 1 - > >> drivers/memstick/core/ms_block.c | 110 +- > >> drivers/memstick/core/ms_block.h | 1 + > >> drivers/memstick/core/mspro_block.c | 121 +- > >> drivers/s390/block/dasd_ioctl.c | 22 +- > >> drivers/scsi/Kconfig | 12 - > >> drivers/scsi/cxlflash/main.c | 6 - > >> drivers/scsi/hosts.c | 29 +- > >> drivers/scsi/lpfc/lpfc_scsi.c | 2 +- > >> drivers/scsi/osd/osd_initiator.c | 4 +- > >> drivers/scsi/osst.c | 2 +- > >> drivers/scsi/qedi/qedi_main.c | 3 +- > >> drivers/scsi/qla2xxx/qla_os.c | 30 +- > >> drivers/scsi/scsi.c | 5 +- > >> drivers/scsi/scsi_debug.c | 3 +- > >> drivers/scsi/scsi_error.c | 4 +- > >> drivers/scsi/scsi_lib.c | 624 +--- > >> drivers/scsi/scsi_priv.h | 1 - > >> drivers/scsi/scsi_scan.c | 10 +- > >> drivers/scsi/scsi_sysfs.c | 8 +- > >> drivers/scsi/scsi_transport_fc.c | 72 +- > >> drivers/scsi/scsi_transport_iscsi.c | 9 +- > >> drivers/scsi/scsi_transport_sas.c | 10 +- > >> drivers/scsi/sg.c | 2 +- > >> drivers/scsi/st.c | 2 +- > >> drivers/scsi/ufs/ufshcd.c | 6 - > >> drivers/target/target_core_pscsi.c | 2 +- > >> include/linux/blk-cgroup.h | 108 - > >> include/linux/blkdev.h | 174 +- > >> include/linux/bsg-lib.h | 3 +- > >> include/linux/elevator.h | 90 +- > >> include/linux/ide.h | 13 +- > >> include/linux/init.h | 1 - > >> include/scsi/scsi_host.h | 18 +- > >> include/scsi/scsi_tcq.h | 14 +- > >> init/do_mounts_initrd.c | 3 - > >> init/initramfs.c | 6 - > >> init/main.c | 12 - > >> 85 files changed, 833 insertions(+), 11144 deletions(-) > > > > Hi Jens, > > > > Kernel oops[2] is triggered when running elevator switch stress test[1]. > > > > [1] https://people.redhat.com/~minlei/tests/tools/elv-switch > > > > [2] kernel oops > > > > [ 399.702365] scsi 8:0:0:0: Direct-Access Linux scsi_debug 0188 PQ: 0 ANSI: 7 > > [ 399.703603] sd 8:0:0:0: Power-on or device reset occurred > > [ 399.709833] sd 8:0:0:0: [sdd] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) > > [ 399.711745] sd 8:0:0:0: [sdd] Write Protect is off > > [ 399.712395] sd 8:0:0:0: [sdd] Mode Sense: 73 00 10 08 > > [ 399.715119] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA > > [ 399.803561] sd 8:0:0:0: [sdd] Attached SCSI disk > > [ 399.844825] sd 8:0:0:0: [sdd] Synchronizing SCSI cache > > [ 399.968945] scsi 8:0:0:0: Direct-Access Linux scsi_debug 0188 PQ: 0 ANSI: 7 > > [ 399.970077] sd 8:0:0:0: Power-on or device reset occurred > > [ 399.972904] sd 8:0:0:0: [sdd] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) > > [ 399.974823] sd 8:0:0:0: [sdd] Write Protect is off > > [ 399.975411] sd 8:0:0:0: [sdd] Mode Sense: 73 00 10 08 > > [ 399.978052] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA > > [ 400.030588] BUG: unable to handle kernel NULL pointer dereference at 0000000000000500 > > [ 400.032195] PGD 0 P4D 0 > > [ 400.032482] Oops: 0000 [#1] PREEMPT SMP PTI > > [ 400.032945] CPU: 2 PID: 318 Comm: kworker/u8:5 Not tainted 4.19.0_0ffdea6679a9_mq-conversions+ #1 > > [ 400.033927] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014 > > [ 400.034915] Workqueue: events_unbound async_run_entry_fn > > [ 400.035536] RIP: 0010:bfq_reset_rate_computation+0x52/0x85 > > [ 400.036177] Code: 00 48 89 83 b0 00 00 00 8b 45 20 c1 e8 09 89 83 d8 00 00 00 48 89 83 d0 00 00 00 eb 0a c7 87 c8 00 00 00 00 00 00 00 48 8b 03 <48> 8b b8 00 05 00 00 48 85 ff 74 24 8b 8b c8 00 00 00 4c 8b 8b d0 > > [ 400.038300] RSP: 0018:ffffc90000a47c50 EFLAGS: 00010046 > > [ 400.038915] RAX: 0000000000000000 RBX: ffff88017ac2bc00 RCX: 0000000017d6067a > > [ 400.039746] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88017ac2bc00 > > [ 400.040573] RBP: ffff88017ac2bc00 R08: 00000000f461e6ac R09: 0000000000000006 > > [ 400.041361] R10: 000000000000020f R11: 0000000000000000 R12: ffff88016c130000 > > [ 400.042127] R13: 0000005d1c095013 R14: ffff88017ac2bf78 R15: 0000000000000020 > > [ 400.042957] FS: 0000000000000000(0000) GS:ffff88017bb00000(0000) knlGS:0000000000000000 > > [ 400.043895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 400.044518] CR2: 0000000000000500 CR3: 0000000179c32004 CR4: 0000000000760ee0 > > [ 400.045294] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > [ 400.046070] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > > [ 400.046843] PKRU: 55555554 > > [ 400.047144] Call Trace: > > [ 400.047438] bfq_finish_requeue_request+0x145/0x2fd > > [ 400.047977] blk_mq_free_request+0x49/0xea > > [ 400.048429] __scsi_execute+0x16c/0x17b > > [ 400.048885] scsi_mode_sense+0x113/0x265 > > [ 400.049356] sd_revalidate_disk+0xb5b/0x109a [sd_mod] > > [ 400.049947] ? __device_add_disk+0x3d2/0x3f6 > > [ 400.050415] sd_probe_async+0x10d/0x18b [sd_mod] > > [ 400.050924] async_run_entry_fn+0x6d/0x12b > > [ 400.051374] process_one_work+0x1da/0x313 > > [ 400.051841] ? rescuer_thread+0x282/0x282 > > [ 400.052313] worker_thread+0x1ca/0x295 > > [ 400.052769] kthread+0x115/0x11d > > [ 400.053127] ? kthread_park+0x76/0x76 > > [ 400.053531] ret_from_fork+0x35/0x40 > > [ 400.053929] Modules linked in: scsi_debug null_blk isofs iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core lpc_ich mfd_core ip_tables sr_mod cdrom usb_storage sd_mod ahci libahci crc32c_intel libata virtio_scsi qemu_fw_cfg dm_mirror dm_region_hash dm_log dm_mod [last unloaded: null_blk] > > [ 400.056640] Dumping ftrace buffer: > > [ 400.057022] (ftrace buffer empty) > > [ 400.057418] CR2: 0000000000000500 > > [ 400.057820] ---[ end trace 812cbc0fe8802fdd ]--- > > Doesn't look related to the series, more like a bug in BFQ. Are you > sure it passes on current -git? Or maybe the bug is exposed by the > series. > > I'll try and reproduce it here and see what happens. Look it is only observed on mq-conversion, and not see it on for-linus, will double check it tomorrow. Thanks, Ming
