HI,
On 09-04-18 03:32, Kunihiko Hayashi wrote:
This reverts commit f0f56716fc3e5d547fd7811eb218a30ed0695605.
According to Thierry's view,
https://www.spinics.net/lists/linux-ide/msg55357.html
some hardware-specific drivers already use their own resets,
and the common reset might make a path to occur double controls of resets.
For now, revert the commit that adds reset control support to ahci-platform,
and hold until the solution is confirmed not be affect all hardware-specific
drivers.
Fixes: f0f56716fc3e ("ata: ahci-platform: add reset control support")
Reported-by: Thierry Reding <thierry.reding@xxxxxxxxx>
Suggested-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Regards,
Hans
---
.../devicetree/bindings/ata/ahci-platform.txt | 1 -
drivers/ata/ahci.h | 1 -
drivers/ata/libahci_platform.c | 24 +++-------------------
3 files changed, 3 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index f4006d3..c760ecb 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -30,7 +30,6 @@ compatible:
Optional properties:
- dma-coherent : Present if dma operations are coherent
- clocks : a list of phandle + clock specifier pairs
-- resets : a list of phandle + reset specifier pairs
- target-supply : regulator for SATA target power
- phys : reference to the SATA PHY node
- phy-names : must be "sata-phy"
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 4356ef1..a9d996e 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -350,7 +350,6 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
bool got_runtime_pm; /* Did we do pm_runtime_get? */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
- struct reset_control *rsts; /* Optional */
struct regulator **target_pwrs; /* Optional */
/*
* If platform uses PHYs. There is a 1:1 relation between the port number and
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 46a7624..30cc8f1 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -25,7 +25,6 @@
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/of_platform.h>
-#include <linux/reset.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -196,8 +195,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
* following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
- * 3) Resets
- * 4) Phys
+ * 3) Phys
*
* If resource enabling fails at any point the previous enabled resources
* are disabled in reverse order.
@@ -217,19 +215,12 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
if (rc)
goto disable_regulator;
- rc = reset_control_deassert(hpriv->rsts);
- if (rc)
- goto disable_clks;
-
rc = ahci_platform_enable_phys(hpriv);
if (rc)
- goto disable_resets;
+ goto disable_clks;
return 0;
-disable_resets:
- reset_control_assert(hpriv->rsts);
-
disable_clks:
ahci_platform_disable_clks(hpriv);
@@ -248,15 +239,12 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
* following order:
* 1) Phys
* 2) Clocks (through ahci_platform_disable_clks)
- * 3) Resets
- * 4) Regulator
+ * 3) Regulator
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
ahci_platform_disable_phys(hpriv);
- reset_control_assert(hpriv->rsts);
-
ahci_platform_disable_clks(hpriv);
ahci_platform_disable_regulators(hpriv);
@@ -405,12 +393,6 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
hpriv->clks[i] = clk;
}
- hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
- if (IS_ERR(hpriv->rsts)) {
- rc = PTR_ERR(hpriv->rsts);
- goto err_out;
- }
-
hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
