Hi Thierry On 04/05/2018 11:54 AM, Thierry Reding wrote: > On Fri, Mar 23, 2018 at 10:30:53AM +0900, Kunihiko Hayashi wrote: >> Add support to get and control a list of resets for the device >> as optional and shared. These resets must be kept de-asserted until >> the device is enabled. >> >> This is specified as shared because some SoCs like UniPhier series >> have common reset controls with all ahci controller instances. >> >> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> >> --- >> .../devicetree/bindings/ata/ahci-platform.txt | 1 + >> drivers/ata/ahci.h | 1 + >> drivers/ata/libahci_platform.c | 24 +++++++++++++++++++--- >> 3 files changed, 23 insertions(+), 3 deletions(-) > > This causes a regression on Tegra because we explicitly request the > resets after the call to ahci_platform_get_resources(). I confirm, we got exactly the same behavior on STi platform. > > From a quick look, ahci_mtk and ahci_st are in the same boat, adding the > corresponding maintainers to Cc. > > Patrice, Matthias: does SATA still work for you after this patch? This > has been in linux-next since next-20180327. SATA is still working after this patch, but a kernel warning is triggered due to the fact that resets are both requested by libahci_platform and by ahci_st driver. Patrice > > Given how this is one of the more hardware-specific bits, perhaps a > better way to do this is to move reset handling into a Uniphier driver > much like Tegra, Mediatek and ST? > > That said, I don't see SATA support for any of the Socionext hardware > either in the DT bindings or drivers/ata, so perhaps it'd be best to > back this out again until we have something that's more well tested? > > Thierry > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
