Re: Decrease boot time with AHCI drives?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[Attach full output of `dmesg`.]

On 04/04/18 11:53, Paul Menzel wrote:
Dear Linux folks,


I am trying to decrease the boot time of the Linux kernel so the LUKS passphrase dialog (in the initrd) is shown as quickly as possible. The devices I test with is a Lenovo X60 and ASRock E350M1 both running with coreboot and the GRUB payload. The goal is to do this without having to rebuild a Linux kernel, but only by run-time

I am currently at 1.2 seconds.

```
[    0.610437] calling  ata_init+0x0/0x2be [libata] @ 88
[    0.610548] libata version 3.00 loaded.
[    0.610570] initcall ata_init+0x0/0x2be [libata] returned 0 after 107 usecs
[    0.612100] calling  serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 89
[    0.612132] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 25 usecs
[    0.612659] calling  ahci_pci_driver_init+0x0/0x1000 [ahci] @ 88
[    0.612715] ahci 0000:00:1f.2: version 3.0
[    0.613050] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.613153] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [    0.613239] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[    0.613915] calling  evdev_init+0x0/0x1000 [evdev] @ 85
[    0.614178] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 250 usecs
[    0.624366] scsi host0: ahci
[    0.630638] scsi host1: ahci
[    0.640413] scsi host2: ahci
[    0.646559] scsi host3: ahci
[    0.646752] ata1: SATA max UDMA/133 abar m1024@0xe4445000 port 0xe4445100 irq 28
[    0.646836] ata2: DUMMY
[    0.646902] ata3: DUMMY
[    0.646964] ata4: DUMMY
[    0.647098] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 33619 usecs
[    1.124129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.124605] ata1.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
[    1.124674] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.125179] ata1.00: configured for UDMA/100
[    1.125522] scsi 0:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
[    1.129127] calling  init_sd+0x0/0x1000 [sd_mod] @ 84
[    1.129268] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 129 usecs [    1.129444] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.129550] sd 0:0:0:0: [sda] Write Protect is off
[    1.129619] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.129647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.130384]  sda: sda1 sda2
[    1.131009] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.213492] calling  dm_init+0x0/0x31 [dm_mod] @ 110
[    1.213535] device-mapper: uevent: version 1.0.3
[    1.213727] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx [    1.213829] initcall dm_init+0x0/0x31 [dm_mod] returned 0 after 312 usecs
[    1.214434] calling  dm_crypt_init+0x0/0x1000 [dm_crypt] @ 110
[    1.214442] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 2 usecs
```

So, according to `initcall_debug` the method `ahci_pci_driver_init` takes 33 ms to execute, which is longer then a few milliseconds.

But more importantly, it takes roughly half a second to set up the device. I understand, that the probing is part of AHCI(?), and in this case the Crucial m4 SSD drive/firmware is especially slow. So, I assume it will be hard to improve anything in the code to decrease the time.

That said, in my case the assumption is, that the device configuration will not change. That means, the drive will be the same and will be connected to the same port all the time.

Additionally, GRUB already probed the device to read the Linux kernel image and initrd image.

So, is there a way to avoid doing the probing twice or at all? That means, either cache the settings, and load them during boot by reading it from the firmware flash ROM chip, possible when using coreboot, and passing it to the Linux kernel for example by GRUB. That would also help with LinuxBoot [1], where the Linux kernel is used as the payload (boot kernel), already setting up the drive and kexec’s another Linux kernel, read from the drive.

Or, GRUB passes the settings it detected to the Linux kernel.


Kind regards,

Paul


[1] https://www.linuxboot.org/
[    0.000000] Linux version 4.14.0-0.bpo.3-686-pae (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Debian 4.14.13-1~bpo9+1 (2018-01-14)
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6fbfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6fc000-0x000000007f7fffff] type 16
[    0.000000] BIOS-e820: [mem 0x000000007f800000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 636338U/636338U, BIOS CBET4000 4.7-625-g0b861daecc 04/03/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6fc max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   2 base 0D0000000 mask 0F0000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [ffa00400]
[    0.000000] initial memory mapped: [mem 0x00000000-0x16ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x16a92000, 0x16a92fff] PGTABLE
[    0.000000] BRK [0x16a93000, 0x16a94fff] PGTABLE
[    0.000000] BRK [0x16a95000, 0x16a95fff] PGTABLE
[    0.000000] BRK [0x16a96000, 0x16a96fff] PGTABLE
[    0.000000] log_buf_len: 8388608 bytes
[    0.000000] early log buf free: 128544(98%)
[    0.000000] RAMDISK: [mem 0x35c6f000-0x36e2efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0800 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007F70D0E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007F7102A0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007F70D280 00301E (v03 COREv4 COREBOOT 20090419 INTL 20160831)
[    0.000000] ACPI: FACS 0x000000007F70D240 000040
[    0.000000] ACPI: FACS 0x000000007F70D240 000040
[    0.000000] ACPI: SSDT 0x000000007F7103A0 000569 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007F710910 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007F710950 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007F710990 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007F712A00 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1152MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x16a97000, 0x16a97fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000375fdfff]
[    0.000000]   HighMem  [mem 0x00000000375fe000-0x000000007f6fbfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f6fbfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6fbfff]
[    0.000000] On node 0 totalpages: 521883
[    0.000000] free_area_init_node: node 0, pgdat d6864480, node_mem_map f4281024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 1958 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 295166 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 29 pages/cpu @f75c1000 s88908 r0 d29876 u118784
[    0.000000] pcpu-alloc: s88908 r0 d29876 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 519889
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-0.bpo.3-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro noisapnp cryptomgr.notests pnpbios=off pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 iomem=relaxed memory_corruption_check=1 memory_corruption_check_size=512k i915.fastboot=1 initcall_debug log_buf_len=8M clocksource=hpet apparmor=0
[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:0007f6fc)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2030848K/2087532K available (6162K kernel code, 604K rwdata, 1916K rodata, 840K init, 452K bss, 56684K reserved, 0K cma-reserved, 1180664K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd35000 - 0xfffff000   (2856 kB)
                 cpu_entry : 0xff800000 - 0xffce1000   (4996 kB)
                   pkmap   : 0xff600000 - 0xff800000   (2048 kB)
                   vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
                     .init : 0xd688f000 - 0xd6961000   ( 840 kB)
                     .data : 0xd6604b17 - 0xd6880300   (2541 kB)
                     .text : 0xd6000000 - 0xd6604b17   (6162 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] ftrace: allocating 27547 entries in 54 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=f70a8000 soft=f70aa000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1662.367 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.73 BogoMIPS (lpj=6649468)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.011578] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.011704] Security Framework initialized
[    0.011771] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011849] AppArmor: AppArmor disabled by boot time parameter
[    0.011948] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012010] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012442] Disabled fast string operations
[    0.012510] CPU: Physical Processor ID: 0
[    0.012574] CPU: Processor Core ID: 0
[    0.012646] mce: CPU supports 6 MCE banks
[    0.012716] CPU0: Thermal monitoring enabled (TM2)
[    0.012787] process: using mwait in idle threads
[    0.012858] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.012925] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.013131] Freeing SMP alternatives memory: 28K
[    0.015239] smpboot: Max logical packages: 1
[    0.015317] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.015844] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056000] smpboot: CPU0: Intel(R) Core(TM) Duo CPU      L2400  @ 1.66GHz (family: 0x6, model: 0xe, stepping: 0xc)
[    0.056000] calling  trace_init_flags_sys_exit+0x0/0x13 @ 1
[    0.056000] initcall trace_init_flags_sys_exit+0x0/0x13 returned 0 after 0 usecs
[    0.056000] calling  trace_init_flags_sys_enter+0x0/0x13 @ 1
[    0.056000] initcall trace_init_flags_sys_enter+0x0/0x13 returned 0 after 0 usecs
[    0.056000] calling  init_hw_perf_events+0x0/0x5a6 @ 1
[    0.056000] Performance Events: Core events, core PMU driver.
[    0.056000] ... version:                1
[    0.056000] ... bit width:              40
[    0.056000] ... generic registers:      2
[    0.056000] ... value mask:             000000ffffffffff
[    0.056000] ... max period:             000000007fffffff
[    0.056000] ... fixed-purpose events:   0
[    0.056000] ... event mask:             0000000000000003
[    0.056000] initcall init_hw_perf_events+0x0/0x5a6 returned 0 after 0 usecs
[    0.056000] calling  init_real_mode+0x0/0x123 @ 1
[    0.056000] initcall init_real_mode+0x0/0x123 returned 0 after 0 usecs
[    0.056000] calling  trace_init_perf_perm_irq_work_exit+0x0/0x16 @ 1
[    0.056000] initcall trace_init_perf_perm_irq_work_exit+0x0/0x16 returned 0 after 0 usecs
[    0.056000] calling  validate_x2apic+0x0/0x4f @ 1
[    0.056000] initcall validate_x2apic+0x0/0x4f returned 0 after 0 usecs
[    0.056000] calling  register_nmi_cpu_backtrace_handler+0x0/0x18 @ 1
[    0.056000] initcall register_nmi_cpu_backtrace_handler+0x0/0x18 returned 0 after 0 usecs
[    0.056000] calling  early_efi_map_fb+0x0/0x3a @ 1
[    0.056000] initcall early_efi_map_fb+0x0/0x3a returned 0 after 0 usecs
[    0.056000] calling  spawn_ksoftirqd+0x0/0x3e @ 1
[    0.056000] initcall spawn_ksoftirqd+0x0/0x3e returned 0 after 0 usecs
[    0.056000] calling  migration_init+0x0/0x31 @ 1
[    0.056000] initcall migration_init+0x0/0x31 returned 0 after 0 usecs
[    0.056000] calling  check_cpu_stall_init+0x0/0x1b @ 1
[    0.056000] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[    0.056000] calling  srcu_bootup_announce+0x0/0x30 @ 1
[    0.056000] Hierarchical SRCU implementation.
[    0.056000] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[    0.056000] calling  rcu_spawn_gp_kthread+0x0/0xfc @ 1
[    0.056000] initcall rcu_spawn_gp_kthread+0x0/0xfc returned 0 after 0 usecs
[    0.056000] calling  cpu_stop_init+0x0/0x7d @ 1
[    0.056000] initcall cpu_stop_init+0x0/0x7d returned 0 after 0 usecs
[    0.056000] calling  init_events+0x0/0x3a @ 1
[    0.056000] initcall init_events+0x0/0x3a returned 0 after 0 usecs
[    0.056000] calling  init_trace_printk+0x0/0xf @ 1
[    0.056000] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[    0.056000] calling  event_trace_enable_again+0x0/0x40 @ 1
[    0.056000] initcall event_trace_enable_again+0x0/0x40 returned 0 after 0 usecs
[    0.056000] calling  jump_label_init_module+0x0/0x14 @ 1
[    0.056000] initcall jump_label_init_module+0x0/0x14 returned 0 after 0 usecs
[    0.056000] calling  dynamic_debug_init+0x0/0x1f0 @ 1
[    0.056000] initcall dynamic_debug_init+0x0/0x1f0 returned 0 after 0 usecs
[    0.056000] calling  rand_initialize+0x0/0xc0 @ 1
[    0.056000] initcall rand_initialize+0x0/0xc0 returned 0 after 0 usecs
[    0.056000] smp: Bringing up secondary CPUs ...
[    0.056000] CPU 1 irqstacks, hard=f7132000 soft=f7134000
[    0.056000] x86: Booting SMP configuration:
[    0.056000] .... node  #0, CPUs:      #1
[    0.004000] Initializing CPU#1
[    0.004000] Disabled fast string operations
[    0.056084] smp: Brought up 1 node, 2 CPUs
[    0.056261] smpboot: Total of 2 processors activated (6649.46 BogoMIPS)
[    0.058070] devtmpfs: initialized
[    0.058070] calling  ipc_ns_init+0x0/0x61 @ 1
[    0.058070] initcall ipc_ns_init+0x0/0x61 returned 0 after 0 usecs
[    0.058070] calling  init_mmap_min_addr+0x0/0x16 @ 1
[    0.058070] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
[    0.058070] calling  init_cpufreq_transition_notifier_list+0x0/0x1d @ 1
[    0.058070] initcall init_cpufreq_transition_notifier_list+0x0/0x1d returned 0 after 0 usecs
[    0.058070] calling  net_ns_init+0x0/0x125 @ 1
[    0.058070] initcall net_ns_init+0x0/0x125 returned 0 after 0 usecs
[    0.058070] calling  xen_pvh_gnttab_setup+0x0/0x34 @ 1
[    0.058070] initcall xen_pvh_gnttab_setup+0x0/0x34 returned -19 after 0 usecs
[    0.058070] calling  e820__register_nvs_regions+0x0/0x3e @ 1
[    0.058070] initcall e820__register_nvs_regions+0x0/0x3e returned 0 after 0 usecs
[    0.058070] calling  cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[    0.058070] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[    0.058070] calling  init_cpu_syscore+0x0/0x11 @ 1
[    0.058070] initcall init_cpu_syscore+0x0/0x11 returned 0 after 0 usecs
[    0.058070] calling  reboot_init+0x0/0x42 @ 1
[    0.058070] initcall reboot_init+0x0/0x42 returned 0 after 0 usecs
[    0.058070] calling  init_lapic_sysfs+0x0/0x24 @ 1
[    0.058070] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[    0.058070] calling  pgd_cache_init+0x0/0x47 @ 1
[    0.058070] initcall pgd_cache_init+0x0/0x47 returned 0 after 0 usecs
[    0.058070] calling  cpu_hotplug_pm_sync_init+0x0/0x16 @ 1
[    0.058070] initcall cpu_hotplug_pm_sync_init+0x0/0x16 returned 0 after 0 usecs
[    0.058070] calling  alloc_frozen_cpus+0x0/0xc @ 1
[    0.058070] initcall alloc_frozen_cpus+0x0/0xc returned 0 after 0 usecs
[    0.058070] calling  wq_sysfs_init+0x0/0x29 @ 1
[    0.058070] initcall wq_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[    0.058070] calling  ksysfs_init+0x0/0x7d @ 1
[    0.058070] initcall ksysfs_init+0x0/0x7d returned 0 after 0 usecs
[    0.058070] calling  pm_init+0x0/0x6d @ 1
[    0.060010] initcall pm_init+0x0/0x6d returned 0 after 0 usecs
[    0.060010] calling  pm_disk_init+0x0/0x19 @ 1
[    0.060010] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[    0.060010] calling  swsusp_header_init+0x0/0x30 @ 1
[    0.060010] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[    0.060010] calling  rcu_set_runtime_mode+0x0/0x16 @ 1
[    0.060010] initcall rcu_set_runtime_mode+0x0/0x16 returned 0 after 0 usecs
[    0.060010] calling  init_jiffies_clocksource+0x0/0x1b @ 1
[    0.060010] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.060010] initcall init_jiffies_clocksource+0x0/0x1b returned 0 after 0 usecs
[    0.060010] calling  futex_init+0x0/0xd5 @ 1
[    0.060010] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.060010] initcall futex_init+0x0/0xd5 returned 0 after 0 usecs
[    0.060010] calling  cgroup_wq_init+0x0/0x2c @ 1
[    0.060010] initcall cgroup_wq_init+0x0/0x2c returned 0 after 0 usecs
[    0.060010] calling  cgroup1_wq_init+0x0/0x2c @ 1
[    0.060010] initcall cgroup1_wq_init+0x0/0x2c returned 0 after 0 usecs
[    0.060010] calling  ftrace_mod_cmd_init+0x0/0xf @ 1
[    0.060010] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs
[    0.060010] calling  init_graph_trace+0x0/0x5a @ 1
[    0.060010] initcall init_graph_trace+0x0/0x5a returned 0 after 0 usecs
[    0.060010] calling  init_per_zone_wmark_min+0x0/0x62 @ 1
[    0.060010] initcall init_per_zone_wmark_min+0x0/0x62 returned 0 after 0 usecs
[    0.060010] calling  init_zero_pfn+0x0/0x25 @ 1
[    0.060010] initcall init_zero_pfn+0x0/0x25 returned 0 after 0 usecs
[    0.060010] calling  memory_failure_init+0x0/0x84 @ 1
[    0.060010] initcall memory_failure_init+0x0/0x84 returned 0 after 0 usecs
[    0.060010] calling  fsnotify_init+0x0/0x44 @ 1
[    0.060010] initcall fsnotify_init+0x0/0x44 returned 0 after 0 usecs
[    0.060010] calling  filelock_init+0x0/0x7f @ 1
[    0.060010] initcall filelock_init+0x0/0x7f returned 0 after 0 usecs
[    0.060010] calling  init_script_binfmt+0x0/0x18 @ 1
[    0.060010] initcall init_script_binfmt+0x0/0x18 returned 0 after 0 usecs
[    0.060010] calling  init_elf_binfmt+0x0/0x18 @ 1
[    0.060010] initcall init_elf_binfmt+0x0/0x18 returned 0 after 0 usecs
[    0.060010] calling  debugfs_init+0x0/0x4b @ 1
[    0.060010] initcall debugfs_init+0x0/0x4b returned 0 after 0 usecs
[    0.060010] calling  tracefs_init+0x0/0x39 @ 1
[    0.060010] initcall tracefs_init+0x0/0x39 returned 0 after 0 usecs
[    0.060010] calling  securityfs_init+0x0/0x63 @ 1
[    0.060010] initcall securityfs_init+0x0/0x63 returned 0 after 0 usecs
[    0.060010] calling  prandom_init+0x0/0xb8 @ 1
[    0.060010] initcall prandom_init+0x0/0xb8 returned 0 after 0 usecs
[    0.060010] calling  pinctrl_init+0x0/0x9d @ 1
[    0.060010] pinctrl core: initialized pinctrl subsystem
[    0.060010] initcall pinctrl_init+0x0/0x9d returned 0 after 0 usecs
[    0.060010] calling  gpiolib_dev_init+0x0/0xb3 @ 1
[    0.060010] initcall gpiolib_dev_init+0x0/0xb3 returned 0 after 0 usecs
[    0.060010] calling  sfi_sysfs_init+0x0/0xbe @ 1
[    0.060010] initcall sfi_sysfs_init+0x0/0xbe returned 0 after 0 usecs
[    0.060010] calling  opp_debug_init+0x0/0x39 @ 1
[    0.060010] initcall opp_debug_init+0x0/0x39 returned 0 after 0 usecs
[    0.060010] calling  cpufreq_core_init+0x0/0x46 @ 1
[    0.060010] initcall cpufreq_core_init+0x0/0x46 returned 0 after 0 usecs
[    0.060010] calling  cpuidle_init+0x0/0x3b @ 1
[    0.060010] initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
[    0.060010] calling  capsule_reboot_register+0x0/0x14 @ 1
[    0.060010] initcall capsule_reboot_register+0x0/0x14 returned 0 after 0 usecs
[    0.060010] calling  bsp_pm_check_init+0x0/0x16 @ 1
[    0.060010] initcall bsp_pm_check_init+0x0/0x16 returned 0 after 0 usecs
[    0.060010] calling  sock_init+0x0/0x8f @ 1
[    0.060010] initcall sock_init+0x0/0x8f returned 0 after 0 usecs
[    0.060010] calling  net_inuse_init+0x0/0x24 @ 1
[    0.060010] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[    0.060010] calling  net_defaults_init+0x0/0x24 @ 1
[    0.060010] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[    0.060010] calling  init_default_flow_dissectors+0x0/0x48 @ 1
[    0.060010] initcall init_default_flow_dissectors+0x0/0x48 returned 0 after 0 usecs
[    0.060010] calling  netpoll_init+0x0/0x34 @ 1
[    0.060010] initcall netpoll_init+0x0/0x34 returned 0 after 0 usecs
[    0.060010] calling  netlink_proto_init+0x0/0x137 @ 1
[    0.060010] NET: Registered protocol family 16
[    0.060023] initcall netlink_proto_init+0x0/0x137 returned 0 after 0 usecs
[    0.060027] calling  __gnttab_init+0x0/0x50 @ 1
[    0.060030] initcall __gnttab_init+0x0/0x50 returned -19 after 0 usecs
[    0.060228] calling  irq_sysfs_init+0x0/0x7e @ 1
[    0.060357] initcall irq_sysfs_init+0x0/0x7e returned 0 after 0 usecs
[    0.060361] calling  bdi_class_init+0x0/0x41 @ 1
[    0.060371] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
[    0.060374] calling  mm_sysfs_init+0x0/0x27 @ 1
[    0.060379] initcall mm_sysfs_init+0x0/0x27 returned 0 after 0 usecs
[    0.060381] calling  gpiolib_sysfs_init+0x0/0x85 @ 1
[    0.060391] initcall gpiolib_sysfs_init+0x0/0x85 returned 0 after 0 usecs
[    0.060393] calling  pcibus_class_init+0x0/0x19 @ 1
[    0.060400] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[    0.060402] calling  pci_driver_init+0x0/0x14 @ 1
[    0.060416] initcall pci_driver_init+0x0/0x14 returned 0 after 0 usecs
[    0.060419] calling  backlight_class_init+0x0/0x91 @ 1
[    0.060427] initcall backlight_class_init+0x0/0x91 returned 0 after 0 usecs
[    0.060430] calling  xenbus_init+0x0/0x26e @ 1
[    0.060432] initcall xenbus_init+0x0/0x26e returned -19 after 0 usecs
[    0.060435] calling  tty_class_init+0x0/0x30 @ 1
[    0.060441] initcall tty_class_init+0x0/0x30 returned 0 after 0 usecs
[    0.060444] calling  vtconsole_class_init+0x0/0xa7 @ 1
[    0.060476] initcall vtconsole_class_init+0x0/0xa7 returned 0 after 0 usecs
[    0.060478] calling  mipi_dsi_bus_init+0x0/0x14 @ 1
[    0.060491] initcall mipi_dsi_bus_init+0x0/0x14 returned 0 after 0 usecs
[    0.060494] calling  wakeup_sources_debugfs_init+0x0/0x24 @ 1
[    0.060500] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.060503] calling  isa_bus_init+0x0/0x38 @ 1
[    0.060534] initcall isa_bus_init+0x0/0x38 returned 0 after 0 usecs
[    0.060536] calling  regmap_initcall+0x0/0x11 @ 1
[    0.060542] initcall regmap_initcall+0x0/0x11 returned 0 after 0 usecs
[    0.060544] calling  spi_init+0x0/0x89 @ 1
[    0.060562] initcall spi_init+0x0/0x89 returned 0 after 0 usecs
[    0.060564] calling  i2c_init+0x0/0xa5 @ 1
[    0.060589] initcall i2c_init+0x0/0xa5 returned 0 after 0 usecs
[    0.060592] calling  init_ladder+0x0/0x27 @ 1
[    0.060614] cpuidle: using governor ladder
[    0.060614] initcall init_ladder+0x0/0x27 returned 0 after 0 usecs
[    0.060614] calling  init_menu+0x0/0x14 @ 1
[    0.060614] cpuidle: using governor menu
[    0.060614] initcall init_menu+0x0/0x14 returned 0 after 0 usecs
[    0.060614] calling  amd_postcore_init+0x0/0xfc @ 1
[    0.060614] initcall amd_postcore_init+0x0/0xfc returned 0 after 0 usecs
[    0.060614] calling  kobject_uevent_init+0x0/0xf @ 1
[    0.060614] initcall kobject_uevent_init+0x0/0xf returned 0 after 0 usecs
[    0.060614] calling  bts_init+0x0/0x9d @ 1
[    0.060614] initcall bts_init+0x0/0x9d returned -19 after 0 usecs
[    0.060614] calling  pt_init+0x0/0x31c @ 1
[    0.060614] initcall pt_init+0x0/0x31c returned -19 after 0 usecs
[    0.060614] calling  boot_params_ksysfs_init+0x0/0x214 @ 1
[    0.060614] initcall boot_params_ksysfs_init+0x0/0x214 returned 0 after 0 usecs
[    0.060614] calling  sbf_init+0x0/0xf2 @ 1
[    0.060614] initcall sbf_init+0x0/0xf2 returned 0 after 0 usecs
[    0.060614] calling  arch_kdebugfs_init+0x0/0x23 @ 1
[    0.060614] initcall arch_kdebugfs_init+0x0/0x23 returned 0 after 0 usecs
[    0.060614] calling  init_pit_clocksource+0x0/0x37 @ 1
[    0.060614] initcall init_pit_clocksource+0x0/0x37 returned 0 after 0 usecs
[    0.060614] calling  mtrr_if_init+0x0/0x50 @ 1
[    0.060614] initcall mtrr_if_init+0x0/0x50 returned 0 after 0 usecs
[    0.060614] calling  ffh_cstate_init+0x0/0x2d @ 1
[    0.060614] initcall ffh_cstate_init+0x0/0x2d returned 0 after 0 usecs
[    0.060614] calling  kdump_buf_page_init+0x0/0x3b @ 1
[    0.060614] initcall kdump_buf_page_init+0x0/0x3b returned 0 after 0 usecs
[    0.060614] calling  activate_jump_labels+0x0/0x35 @ 1
[    0.060614] initcall activate_jump_labels+0x0/0x35 returned 0 after 0 usecs
[    0.060614] calling  kcmp_cookies_init+0x0/0x2f @ 1
[    0.060614] initcall kcmp_cookies_init+0x0/0x2f returned 0 after 0 usecs
[    0.060614] calling  acpi_pci_init+0x0/0x60 @ 1
[    0.060614] ACPI: bus type PCI registered
[    0.060614] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.060614] initcall acpi_pci_init+0x0/0x60 returned 0 after 0 usecs
[    0.060614] calling  dma_bus_init+0x0/0x91 @ 1
[    0.060614] initcall dma_bus_init+0x0/0x91 returned 0 after 0 usecs
[    0.060614] calling  dma_channel_table_init+0x0/0xc2 @ 1
[    0.060614] initcall dma_channel_table_init+0x0/0xc2 returned 0 after 0 usecs
[    0.060614] calling  setup_vcpu_hotplug_event+0x0/0x2d @ 1
[    0.060614] initcall setup_vcpu_hotplug_event+0x0/0x2d returned -19 after 0 usecs
[    0.060614] calling  register_xen_pci_notifier+0x0/0x34 @ 1
[    0.060614] initcall register_xen_pci_notifier+0x0/0x34 returned 0 after 0 usecs
[    0.060614] calling  xen_pcpu_init+0x0/0xb2 @ 1
[    0.060614] initcall xen_pcpu_init+0x0/0xb2 returned -19 after 0 usecs
[    0.060614] calling  dmi_id_init+0x0/0x29e @ 1
[    0.060614] initcall dmi_id_init+0x0/0x29e returned 0 after 0 usecs
[    0.060614] calling  pci_arch_init+0x0/0x6b @ 1
[    0.060622] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.060712] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.060780] PCI: Using MMCONFIG for extended config space
[    0.060846] PCI: Using configuration type 1 for base access
[    0.060923] initcall pci_arch_init+0x0/0x6b returned 0 after 0 usecs
[    0.061119] calling  fixup_ht_bug+0x0/0x9c @ 1
[    0.061121] initcall fixup_ht_bug+0x0/0x9c returned 0 after 0 usecs
[    0.061124] calling  topology_init+0x0/0x30 @ 1
[    0.061215] initcall topology_init+0x0/0x30 returned 0 after 0 usecs
[    0.061217] calling  mtrr_init_finialize+0x0/0x41 @ 1
[    0.061221] initcall mtrr_init_finialize+0x0/0x41 returned 0 after 0 usecs
[    0.061223] calling  uid_cache_init+0x0/0x85 @ 1
[    0.061227] initcall uid_cache_init+0x0/0x85 returned 0 after 0 usecs
[    0.061229] calling  param_sysfs_init+0x0/0x164 @ 1
[    0.062737] initcall param_sysfs_init+0x0/0x164 returned 0 after 3906 usecs
[    0.062740] calling  user_namespace_sysctl_init+0x0/0x31 @ 1
[    0.062760] initcall user_namespace_sysctl_init+0x0/0x31 returned 0 after 0 usecs
[    0.062762] calling  proc_schedstat_init+0x0/0x1f @ 1
[    0.062767] initcall proc_schedstat_init+0x0/0x1f returned 0 after 0 usecs
[    0.062770] calling  pm_sysrq_init+0x0/0x1b @ 1
[    0.064012] initcall pm_sysrq_init+0x0/0x1b returned 0 after 0 usecs
[    0.064012] calling  create_proc_profile+0x0/0xd0 @ 1
[    0.064014] initcall create_proc_profile+0x0/0xd0 returned 0 after 0 usecs
[    0.064017] calling  crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1
[    0.064062] initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 0 usecs
[    0.064064] calling  crash_notes_memory_init+0x0/0x36 @ 1
[    0.064069] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
[    0.064071] calling  cgroup_namespaces_init+0x0/0xc @ 1
[    0.064074] initcall cgroup_namespaces_init+0x0/0xc returned 0 after 0 usecs
[    0.064076] calling  user_namespaces_init+0x0/0x2c @ 1
[    0.064086] initcall user_namespaces_init+0x0/0x2c returned 0 after 0 usecs
[    0.064088] calling  hung_task_init+0x0/0x49 @ 1
[    0.064097] initcall hung_task_init+0x0/0x49 returned 0 after 0 usecs
[    0.064097] calling  dev_map_init+0x0/0x16 @ 1
[    0.064097] initcall dev_map_init+0x0/0x16 returned 0 after 0 usecs
[    0.064097] calling  oom_init+0x0/0x59 @ 1
[    0.064097] initcall oom_init+0x0/0x59 returned 0 after 0 usecs
[    0.064097] calling  default_bdi_init+0x0/0xa7 @ 1
[    0.064097] initcall default_bdi_init+0x0/0xa7 returned 0 after 0 usecs
[    0.064097] calling  percpu_enable_async+0x0/0x13 @ 1
[    0.064097] initcall percpu_enable_async+0x0/0x13 returned 0 after 0 usecs
[    0.064097] calling  kcompactd_init+0x0/0x49 @ 1
[    0.064097] initcall kcompactd_init+0x0/0x49 returned 0 after 0 usecs
[    0.064097] calling  init_reserve_notifier+0x0/0x7 @ 1
[    0.064097] initcall init_reserve_notifier+0x0/0x7 returned 0 after 0 usecs
[    0.064097] calling  init_admin_reserve+0x0/0x40 @ 1
[    0.064097] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[    0.064097] calling  init_user_reserve+0x0/0x40 @ 1
[    0.064097] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[    0.064097] calling  swap_init_sysfs+0x0/0x5d @ 1
[    0.064097] initcall swap_init_sysfs+0x0/0x5d returned 0 after 0 usecs
[    0.064097] calling  swapfile_init+0x0/0x40 @ 1
[    0.064097] initcall swapfile_init+0x0/0x40 returned 0 after 0 usecs
[    0.064097] calling  hugetlb_init+0x0/0x3b2 @ 1
[    0.064097] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.064097] initcall hugetlb_init+0x0/0x3b2 returned 0 after 0 usecs
[    0.064097] calling  ksm_init+0x0/0x14b @ 1
[    0.064097] initcall ksm_init+0x0/0x14b returned 0 after 0 usecs
[    0.064097] calling  hugepage_init+0x0/0x12d @ 1
[    0.064097] initcall hugepage_init+0x0/0x12d returned 0 after 0 usecs
[    0.064097] calling  mem_cgroup_swap_init+0x0/0x51 @ 1
[    0.064097] initcall mem_cgroup_swap_init+0x0/0x51 returned 0 after 0 usecs
[    0.064097] calling  mem_cgroup_init+0x0/0xc6 @ 1
[    0.064097] initcall mem_cgroup_init+0x0/0xc6 returned 0 after 0 usecs
[    0.064097] calling  sel_ib_pkey_init+0x0/0x30 @ 1
[    0.064097] initcall sel_ib_pkey_init+0x0/0x30 returned 0 after 0 usecs
[    0.064097] calling  crypto_wq_init+0x0/0x2c @ 1
[    0.064097] initcall crypto_wq_init+0x0/0x2c returned 0 after 0 usecs
[    0.064097] calling  cryptomgr_init+0x0/0x14 @ 1
[    0.064097] initcall cryptomgr_init+0x0/0x14 returned 0 after 0 usecs
[    0.064097] calling  init_bio+0x0/0xc2 @ 1
[    0.064113] initcall init_bio+0x0/0xc2 returned 0 after 0 usecs
[    0.064113] calling  blk_settings_init+0x0/0x22 @ 1
[    0.064113] initcall blk_settings_init+0x0/0x22 returned 0 after 0 usecs
[    0.064113] calling  blk_ioc_init+0x0/0x29 @ 1
[    0.064113] initcall blk_ioc_init+0x0/0x29 returned 0 after 0 usecs
[    0.064113] calling  blk_softirq_init+0x0/0x63 @ 1
[    0.064113] initcall blk_softirq_init+0x0/0x63 returned 0 after 0 usecs
[    0.064113] calling  blk_mq_init+0x0/0x26 @ 1
[    0.064113] initcall blk_mq_init+0x0/0x26 returned 0 after 0 usecs
[    0.064113] calling  genhd_device_init+0x0/0x66 @ 1
[    0.064113] initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
[    0.064113] calling  irq_poll_setup+0x0/0x5e @ 1
[    0.064113] initcall irq_poll_setup+0x0/0x5e returned 0 after 0 usecs
[    0.064113] calling  byt_gpio_init+0x0/0x16 @ 1
[    0.064113] initcall byt_gpio_init+0x0/0x16 returned 0 after 0 usecs
[    0.064113] calling  chv_pinctrl_init+0x0/0x16 @ 1
[    0.064113] initcall chv_pinctrl_init+0x0/0x16 returned 0 after 0 usecs
[    0.064113] calling  bxt_pinctrl_init+0x0/0x16 @ 1
[    0.064113] initcall bxt_pinctrl_init+0x0/0x16 returned 0 after 0 usecs
[    0.064113] calling  spt_pinctrl_init+0x0/0x16 @ 1
[    0.064113] initcall spt_pinctrl_init+0x0/0x16 returned 0 after 0 usecs
[    0.064113] calling  gpiolib_debugfs_init+0x0/0x24 @ 1
[    0.064113] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.064113] calling  pci_slot_init+0x0/0x40 @ 1
[    0.064113] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[    0.064113] calling  fbmem_init+0x0/0xcb @ 1
[    0.064143] initcall fbmem_init+0x0/0xcb returned 0 after 0 usecs
[    0.064145] calling  scan_for_dmi_ipmi+0x0/0x112 @ 1
[    0.064149] initcall scan_for_dmi_ipmi+0x0/0x112 returned 0 after 0 usecs
[    0.064151] calling  acpi_init+0x0/0x315 @ 1
[    0.064176] ACPI: Added _OSI(Module Device)
[    0.064242] ACPI: Added _OSI(Processor Device)
[    0.064306] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.064372] ACPI: Added _OSI(Processor Aggregator Device)
[    0.064607] ACPI: Executed 1 blocks of module-level executable AML code
[    0.066266] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.069600] ACPI: EC: EC started
[    0.069664] ACPI: EC: interrupt blocked
[    0.069877] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.069944] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.070028] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.070110] ACPI: Interpreter enabled
[    0.070207] ACPI: (supports S0 S3 S4 S5)
[    0.070271] ACPI: Using IOAPIC for interrupt routing
[    0.070373] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.070763] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.083577] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[    0.083813] ACPI: Power Resource [FPWR] (off)
[    0.084535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.084610] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.084842] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.085711] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.086271] PCI host bridge to bus 0000:00
[    0.086338] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.086408] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.086477] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.086561] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.086644] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.086727] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.086811] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.086895] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.086978] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.087062] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.087144] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.087227] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.087311] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.087394] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.087477] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.087561] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.087644] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.087728] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.087811] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.087889] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.088090] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.088106] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[    0.088113] pci 0000:00:02.0: reg 0x14: [io  0x50b0-0x50b7]
[    0.088120] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.088127] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[    0.088299] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.088313] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[    0.088550] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.088585] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[    0.088702] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.088873] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.089002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.089176] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.089302] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.089476] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.089593] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.089767] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.089885] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.090060] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.090122] pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
[    0.090304] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.090367] pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
[    0.090548] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.090610] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.090796] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.090858] pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
[    0.091048] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.091076] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[    0.091182] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.091340] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.091566] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.091690] pci 0000:00:1f.0: quirk: [io  0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
[    0.091779] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.091851] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.091936] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.092007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.092272] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.092299] pci 0000:00:1f.1: reg 0x10: [io  0x50b8-0x50bf]
[    0.092311] pci 0000:00:1f.1: reg 0x14: [io  0x50d8-0x50db]
[    0.092323] pci 0000:00:1f.1: reg 0x18: [io  0x50c0-0x50c7]
[    0.092336] pci 0000:00:1f.1: reg 0x1c: [io  0x50dc-0x50df]
[    0.092348] pci 0000:00:1f.1: reg 0x20: [io  0x50a0-0x50af]
[    0.092374] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.092445] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.092514] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.092584] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.092805] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.092833] pci 0000:00:1f.2: reg 0x10: [io  0x50c8-0x50cf]
[    0.092845] pci 0000:00:1f.2: reg 0x14: [io  0x50e0-0x50e3]
[    0.092858] pci 0000:00:1f.2: reg 0x18: [io  0x50d0-0x50d7]
[    0.092870] pci 0000:00:1f.2: reg 0x1c: [io  0x50e4-0x50e7]
[    0.092882] pci 0000:00:1f.2: reg 0x20: [io  0x5080-0x508f]
[    0.092895] pci 0000:00:1f.2: reg 0x24: [mem 0xe4445000-0xe44453ff]
[    0.092953] pci 0000:00:1f.2: PME# supported from D3hot
[    0.093107] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.093189] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.093466] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[    0.093521] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[    0.093563] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.093767] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.104037] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.104107] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.104113] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.104248] pci 0000:02:00.0: [8086:4227] type 00 class 0x028000
[    0.104348] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe4200fff]
[    0.104800] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.116053] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.116127] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.116207] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.116355] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.116597] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[    0.116627] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[    0.116670] pci 0000:05:00.0: supports D1 D2
[    0.116672] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116785] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[    0.116813] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
[    0.116916] pci 0000:05:00.1: supports D1 D2
[    0.116919] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.117017] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[    0.117046] pci 0000:05:00.2: reg 0x10: [mem 0xe2002000-0xe20020ff]
[    0.117151] pci 0000:05:00.2: supports D1 D2
[    0.117153] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.117301] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[    0.117375] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.117381] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.117390] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.117393] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.117396] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.117399] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.117401] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.117404] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.117407] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.117410] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[    0.117413] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.117415] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.117418] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.117421] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.117424] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.117427] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.117430] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.117433] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.117435] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.117438] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.117441] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.117507] pci_bus 0000:06: busn_res: [bus 06] end can not be updated to 09
[    0.117514] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09
[    0.117619] pci_bus 0000:00: on NUMA node 0
[    0.117822] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.118000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.118176] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.118352] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.118527] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.118703] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.118878] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.119054] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.120983] ACPI: EC: interrupt unblocked
[    0.121057] ACPI: EC: event unblocked
[    0.121128] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.121211] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.121334] initcall acpi_init+0x0/0x315 returned 0 after 54687 usecs
[    0.121338] calling  pnp_init+0x0/0x14 @ 1
[    0.121352] initcall pnp_init+0x0/0x14 returned 0 after 0 usecs
[    0.121354] calling  balloon_init+0x0/0x110 @ 1
[    0.121357] initcall balloon_init+0x0/0x110 returned -19 after 0 usecs
[    0.121361] calling  xen_setup_shutdown_event+0x0/0x40 @ 1
[    0.121365] initcall xen_setup_shutdown_event+0x0/0x40 returned -19 after 0 usecs
[    0.121367] calling  xenbus_probe_backend_init+0x0/0x4f @ 1
[    0.121382] initcall xenbus_probe_backend_init+0x0/0x4f returned 0 after 0 usecs
[    0.121385] calling  xenbus_probe_frontend_init+0x0/0x4f @ 1
[    0.121398] initcall xenbus_probe_frontend_init+0x0/0x4f returned 0 after 0 usecs
[    0.121401] calling  xen_acpi_pad_init+0x0/0x4c @ 1
[    0.121403] initcall xen_acpi_pad_init+0x0/0x4c returned -19 after 0 usecs
[    0.121406] calling  misc_init+0x0/0xa6 @ 1
[    0.121417] initcall misc_init+0x0/0xa6 returned 0 after 0 usecs
[    0.121419] calling  tpm_init+0x0/0xba @ 1
[    0.121430] initcall tpm_init+0x0/0xba returned 0 after 0 usecs
[    0.121432] calling  vga_arb_device_init+0x0/0x17e @ 1
[    0.121464] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.121464] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.121464] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.121464] vgaarb: loaded
[    0.121464] initcall vga_arb_device_init+0x0/0x17e returned 0 after 0 usecs
[    0.121464] calling  cn_init+0x0/0xc0 @ 1
[    0.121464] initcall cn_init+0x0/0xc0 returned 0 after 0 usecs
[    0.121464] calling  dax_fs_init+0x0/0xab @ 1
[    0.121464] initcall dax_fs_init+0x0/0xab returned 0 after 0 usecs
[    0.121464] calling  dma_buf_init+0x0/0x9b @ 1
[    0.121464] initcall dma_buf_init+0x0/0x9b returned 0 after 0 usecs
[    0.121464] calling  serio_init+0x0/0x2d @ 1
[    0.121464] initcall serio_init+0x0/0x2d returned 0 after 0 usecs
[    0.121464] calling  input_init+0x0/0xe1 @ 1
[    0.121464] initcall input_init+0x0/0xe1 returned 0 after 0 usecs
[    0.121464] calling  rtc_init+0x0/0x47 @ 1
[    0.121464] initcall rtc_init+0x0/0x47 returned 0 after 0 usecs
[    0.121464] calling  power_supply_class_init+0x0/0x3a @ 1
[    0.121464] initcall power_supply_class_init+0x0/0x3a returned 0 after 0 usecs
[    0.121464] calling  hwmon_init+0x0/0xd5 @ 1
[    0.121464] initcall hwmon_init+0x0/0xd5 returned 0 after 0 usecs
[    0.121464] calling  edac_init+0x0/0x6f @ 1
[    0.121464] EDAC MC: Ver: 3.0.0
[    0.121464] initcall edac_init+0x0/0x6f returned 0 after 0 usecs
[    0.121464] calling  leds_init+0x0/0x37 @ 1
[    0.121464] initcall leds_init+0x0/0x37 returned 0 after 0 usecs
[    0.121464] calling  dmi_init+0x0/0xf8 @ 1
[    0.121464] initcall dmi_init+0x0/0xf8 returned 0 after 0 usecs
[    0.121464] calling  efisubsys_init+0x0/0x25d @ 1
[    0.121464] initcall efisubsys_init+0x0/0x25d returned 0 after 0 usecs
[    0.121464] calling  devfreq_init+0x0/0x90 @ 1
[    0.121464] initcall devfreq_init+0x0/0x90 returned 0 after 0 usecs
[    0.121464] calling  ras_init+0x0/0x14 @ 1
[    0.121464] initcall ras_init+0x0/0x14 returned 0 after 0 usecs
[    0.121464] calling  nvmem_init+0x0/0x14 @ 1
[    0.121464] initcall nvmem_init+0x0/0x14 returned 0 after 0 usecs
[    0.121464] calling  pci_subsys_init+0x0/0x63 @ 1
[    0.121464] PCI: Using ACPI for IRQ routing
[    0.124832] PCI: pci_cache_line_size set to 64 bytes
[    0.124932] e820: reserve RAM buffer [mem 0x7f6fc000-0x7fffffff]
[    0.124937] initcall pci_subsys_init+0x0/0x63 returned 0 after 3906 usecs
[    0.124939] calling  proto_init+0x0/0x14 @ 1
[    0.124944] initcall proto_init+0x0/0x14 returned 0 after 0 usecs
[    0.124947] calling  net_dev_init+0x0/0x1b3 @ 1
[    0.125096] initcall net_dev_init+0x0/0x1b3 returned 0 after 0 usecs
[    0.125099] calling  neigh_init+0x0/0x78 @ 1
[    0.125102] initcall neigh_init+0x0/0x78 returned 0 after 0 usecs
[    0.125105] calling  fib_notifier_init+0x0/0x14 @ 1
[    0.125107] initcall fib_notifier_init+0x0/0x14 returned 0 after 0 usecs
[    0.125110] calling  fib_rules_init+0x0/0xa6 @ 1
[    0.125114] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[    0.125117] calling  init_cgroup_netprio+0x0/0x16 @ 1
[    0.125120] initcall init_cgroup_netprio+0x0/0x16 returned 0 after 0 usecs
[    0.125122] calling  bpf_lwt_init+0x0/0x19 @ 1
[    0.125125] initcall bpf_lwt_init+0x0/0x19 returned 0 after 0 usecs
[    0.125128] calling  pktsched_init+0x0/0xf6 @ 1
[    0.125134] initcall pktsched_init+0x0/0xf6 returned 0 after 0 usecs
[    0.125136] calling  tc_filter_init+0x0/0x79 @ 1
[    0.125146] initcall tc_filter_init+0x0/0x79 returned 0 after 0 usecs
[    0.125149] calling  tc_action_init+0x0/0x4e @ 1
[    0.125152] initcall tc_action_init+0x0/0x4e returned 0 after 0 usecs
[    0.125154] calling  genl_init+0x0/0x33 @ 1
[    0.125164] initcall genl_init+0x0/0x33 returned 0 after 0 usecs
[    0.125167] calling  ipv4_netfilter_init+0x0/0x14 @ 1
[    0.125170] initcall ipv4_netfilter_init+0x0/0x14 returned 0 after 0 usecs
[    0.125173] calling  wireless_nlevent_init+0x0/0x38 @ 1
[    0.125176] initcall wireless_nlevent_init+0x0/0x38 returned 0 after 0 usecs
[    0.125179] calling  xen_mcfg_late+0x0/0xf2 @ 1
[    0.125181] initcall xen_mcfg_late+0x0/0xf2 returned 0 after 0 usecs
[    0.125184] calling  watchdog_init+0x0/0x74 @ 1
[    0.125226] initcall watchdog_init+0x0/0x74 returned 0 after 0 usecs
[    0.125226] calling  nmi_warning_debugfs+0x0/0x26 @ 1
[    0.125226] initcall nmi_warning_debugfs+0x0/0x26 returned 0 after 0 usecs
[    0.125226] calling  save_microcode_in_initrd+0x0/0x9b @ 1
[    0.125226] initcall save_microcode_in_initrd+0x0/0x9b returned 0 after 0 usecs
[    0.125226] calling  hpet_late_init+0x0/0xf6 @ 1
[    0.125226] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.125226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.125226] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.126507] initcall hpet_late_init+0x0/0xf6 returned 0 after 0 usecs
[    0.126507] calling  init_amd_nbs+0x0/0x10d @ 1
[    0.126507] initcall init_amd_nbs+0x0/0x10d returned 0 after 0 usecs
[    0.126507] calling  sugov_register+0x0/0x14 @ 1
[    0.126507] initcall sugov_register+0x0/0x14 returned 0 after 0 usecs
[    0.126507] calling  clocksource_done_booting+0x0/0x40 @ 1
[    0.126507] clocksource: Switched to clocksource hpet
[    0.126507] initcall clocksource_done_booting+0x0/0x40 returned 0 after 71 usecs
[    0.126507] calling  tracer_init_tracefs+0x0/0x173 @ 1
[    0.132099] initcall tracer_init_tracefs+0x0/0x173 returned 0 after 7827 usecs
[    0.132102] calling  init_trace_printk_function_export+0x0/0x2d @ 1
[    0.132108] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 2 usecs
[    0.132110] calling  init_graph_tracefs+0x0/0x2d @ 1
[    0.132121] initcall init_graph_tracefs+0x0/0x2d returned 0 after 7 usecs
[    0.132124] calling  event_trace_init+0x0/0x255 @ 1
[    0.146024] initcall event_trace_init+0x0/0x255 returned 0 after 13559 usecs
[    0.146030] calling  init_kprobe_trace+0x0/0x83 @ 1
[    0.146040] initcall init_kprobe_trace+0x0/0x83 returned 0 after 6 usecs
[    0.146043] calling  init_uprobe_trace+0x0/0x4c @ 1
[    0.146052] initcall init_uprobe_trace+0x0/0x4c returned 0 after 5 usecs
[    0.146054] calling  bpf_init+0x0/0x42 @ 1
[    0.146071] initcall bpf_init+0x0/0x42 returned 0 after 12 usecs
[    0.146075] calling  init_pipe_fs+0x0/0x46 @ 1
[    0.146105] initcall init_pipe_fs+0x0/0x46 returned 0 after 26 usecs
[    0.146108] calling  cgroup_writeback_init+0x0/0x2c @ 1
[    0.146148] initcall cgroup_writeback_init+0x0/0x2c returned 0 after 34 usecs
[    0.146151] calling  inotify_user_setup+0x0/0x4a @ 1
[    0.146164] initcall inotify_user_setup+0x0/0x4a returned 0 after 9 usecs
[    0.146166] calling  eventpoll_init+0x0/0xe7 @ 1
[    0.146195] initcall eventpoll_init+0x0/0xe7 returned 0 after 24 usecs
[    0.146198] calling  anon_inode_init+0x0/0x4e @ 1
[    0.146215] initcall anon_inode_init+0x0/0x4e returned 0 after 12 usecs
[    0.146217] calling  init_dax_wait_table+0x0/0x2f @ 1
[    0.146255] initcall init_dax_wait_table+0x0/0x2f returned 0 after 32 usecs
[    0.146258] calling  proc_locks_init+0x0/0x1f @ 1
[    0.146266] initcall proc_locks_init+0x0/0x1f returned 0 after 5 usecs
[    0.146269] calling  dquot_init+0x0/0x101 @ 1
[    0.146271] VFS: Disk quotas dquot_6.6.0
[    0.146381] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.146453] initcall dquot_init+0x0/0x101 returned 0 after 175 usecs
[    0.146455] calling  quota_init+0x0/0x25 @ 1
[    0.146479] initcall quota_init+0x0/0x25 returned 0 after 19 usecs
[    0.146481] calling  proc_cmdline_init+0x0/0x1f @ 1
[    0.146488] initcall proc_cmdline_init+0x0/0x1f returned 0 after 2 usecs
[    0.146491] calling  proc_consoles_init+0x0/0x1f @ 1
[    0.146496] initcall proc_consoles_init+0x0/0x1f returned 0 after 2 usecs
[    0.146499] calling  proc_cpuinfo_init+0x0/0x1f @ 1
[    0.146505] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 1 usecs
[    0.146507] calling  proc_devices_init+0x0/0x1f @ 1
[    0.146513] initcall proc_devices_init+0x0/0x1f returned 0 after 1 usecs
[    0.146516] calling  proc_interrupts_init+0x0/0x1f @ 1
[    0.146522] initcall proc_interrupts_init+0x0/0x1f returned 0 after 2 usecs
[    0.146524] calling  proc_loadavg_init+0x0/0x1f @ 1
[    0.146530] initcall proc_loadavg_init+0x0/0x1f returned 0 after 1 usecs
[    0.146532] calling  proc_meminfo_init+0x0/0x1f @ 1
[    0.146538] initcall proc_meminfo_init+0x0/0x1f returned 0 after 1 usecs
[    0.146540] calling  proc_stat_init+0x0/0x1f @ 1
[    0.146546] initcall proc_stat_init+0x0/0x1f returned 0 after 2 usecs
[    0.146549] calling  proc_uptime_init+0x0/0x1f @ 1
[    0.146554] initcall proc_uptime_init+0x0/0x1f returned 0 after 2 usecs
[    0.146557] calling  proc_version_init+0x0/0x1f @ 1
[    0.146567] initcall proc_version_init+0x0/0x1f returned 0 after 5 usecs
[    0.146569] calling  proc_softirqs_init+0x0/0x1f @ 1
[    0.146575] initcall proc_softirqs_init+0x0/0x1f returned 0 after 2 usecs
[    0.146578] calling  proc_kcore_init+0x0/0x6e @ 1
[    0.146585] initcall proc_kcore_init+0x0/0x6e returned 0 after 3 usecs
[    0.146587] calling  vmcore_init+0x0/0x6bf @ 1
[    0.146593] initcall vmcore_init+0x0/0x6bf returned 0 after 1 usecs
[    0.146595] calling  proc_kmsg_init+0x0/0x22 @ 1
[    0.146601] initcall proc_kmsg_init+0x0/0x22 returned 0 after 2 usecs
[    0.146604] calling  proc_page_init+0x0/0x4e @ 1
[    0.146611] initcall proc_page_init+0x0/0x4e returned 0 after 3 usecs
[    0.146614] calling  init_ramfs_fs+0x0/0x22 @ 1
[    0.146619] initcall init_ramfs_fs+0x0/0x22 returned 0 after 1 usecs
[    0.146621] calling  init_hugetlbfs_fs+0x0/0x13c @ 1
[    0.146660] initcall init_hugetlbfs_fs+0x0/0x13c returned 0 after 33 usecs
[    0.146663] calling  tomoyo_initerface_init+0x0/0x138 @ 1
[    0.146669] initcall tomoyo_initerface_init+0x0/0x138 returned 0 after 1 usecs
[    0.146671] calling  aa_create_aafs+0x0/0x31f @ 1
[    0.146676] initcall aa_create_aafs+0x0/0x31f returned 0 after 1 usecs
[    0.146678] calling  blk_scsi_ioctl_init+0x0/0x352 @ 1
[    0.146684] initcall blk_scsi_ioctl_init+0x0/0x352 returned 0 after 2 usecs
[    0.146686] calling  dynamic_debug_init_debugfs+0x0/0x5f @ 1
[    0.146699] initcall dynamic_debug_init_debugfs+0x0/0x5f returned 0 after 9 usecs
[    0.146702] calling  acpi_event_init+0x0/0x31 @ 1
[    0.146714] initcall acpi_event_init+0x0/0x31 returned 0 after 7 usecs
[    0.146716] calling  pnp_system_init+0x0/0x14 @ 1
[    0.146743] initcall pnp_system_init+0x0/0x14 returned 0 after 22 usecs
[    0.146745] calling  pnpacpi_init+0x0/0x6c @ 1
[    0.146747] pnp: PnP ACPI init
[    0.147025] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.147096] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.147166] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.147236] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.147307] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.147377] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.147446] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.147517] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.147594] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148406] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.148482] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.148585] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.148655] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.148723] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.148797] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148846] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.148916] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.148978] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.149038] pnp 00:06: Plug and Play ACPI device, IDs WACf004 (active)
[    0.149102] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.149168] pnp: PnP ACPI: found 8 devices
[    0.149236] initcall pnpacpi_init+0x0/0x6c returned 0 after 2427 usecs
[    0.149239] calling  pnpbios_init+0x0/0x34c @ 1
[    0.149241] PnPBIOS: Disabled
[    0.149306] initcall pnpbios_init+0x0/0x34c returned -19 after 61 usecs
[    0.149308] calling  chr_dev_init+0x0/0x9b @ 1
[    0.153155] initcall chr_dev_init+0x0/0x9b returned 0 after 3750 usecs
[    0.153159] calling  firmware_class_init+0x0/0xd6 @ 1
[    0.153173] initcall firmware_class_init+0x0/0xd6 returned 0 after 10 usecs
[    0.153176] calling  thermal_init+0x0/0xc8 @ 1
[    0.153197] initcall thermal_init+0x0/0xc8 returned 0 after 16 usecs
[    0.153200] calling  cpufreq_gov_performance_init+0x0/0x14 @ 1
[    0.153206] initcall cpufreq_gov_performance_init+0x0/0x14 returned 0 after 1 usecs
[    0.153209] calling  cpufreq_gov_dbs_init+0x0/0x14 @ 1
[    0.153214] initcall cpufreq_gov_dbs_init+0x0/0x14 returned 0 after 1 usecs
[    0.153218] calling  map_properties+0x0/0x45f @ 1
[    0.153222] initcall map_properties+0x0/0x45f returned 0 after 1 usecs
[    0.153225] calling  init_acpi_pm_clocksource+0x0/0x172 @ 1
[    0.187744] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.187834] initcall init_acpi_pm_clocksource+0x0/0x172 returned 0 after 33793 usecs
[    0.187836] calling  pcibios_assign_resources+0x0/0x9f @ 1
[    0.187861] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.187943] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.188039] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.188107] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.188180] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.188253] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.188342] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.188413] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.188491] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.188570] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.188665] pci 0000:05:00.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.188758] pci 0000:05:00.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.188829] pci 0000:05:00.0: BAR 13: assigned [io  0x2000-0x20ff]
[    0.188898] pci 0000:05:00.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.188967] pci 0000:05:00.0: CardBus bridge to [bus 06]
[    0.189034] pci 0000:05:00.0:   bridge window [io  0x2000-0x20ff]
[    0.189105] pci 0000:05:00.0:   bridge window [io  0x2400-0x24ff]
[    0.189176] pci 0000:05:00.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.189262] pci 0000:05:00.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.189335] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[    0.189403] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.189476] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.189548] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.189639] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.189642] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.189644] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.189647] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.189650] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.189653] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.189656] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.189658] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.189661] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.189664] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.189666] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.189669] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.189672] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.189675] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.189677] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.189680] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.189683] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.189686] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.189689] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.189691] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.189694] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.189697] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
[    0.189701] pci_bus 0000:05: resource 0 [io  0x2000-0x3fff]
[    0.189704] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[    0.189707] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.189710] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.189712] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.189715] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.189718] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.189720] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.189723] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.189726] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.189728] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.189731] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.189734] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.189736] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.189739] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.189742] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.189744] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.189747] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff window]
[    0.189750] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.189753] pci_bus 0000:05: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.189755] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.189758] pci_bus 0000:06: resource 0 [io  0x2000-0x20ff]
[    0.189761] pci_bus 0000:06: resource 1 [io  0x2400-0x24ff]
[    0.189763] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.189766] pci_bus 0000:06: resource 3 [mem 0x88000000-0x8bffffff]
[    0.189867] initcall pcibios_assign_resources+0x0/0x9f returned 0 after 1978 usecs
[    0.189870] calling  sysctl_core_init+0x0/0x28 @ 1
[    0.189898] initcall sysctl_core_init+0x0/0x28 returned 0 after 23 usecs
[    0.189901] calling  eth_offload_init+0x0/0x16 @ 1
[    0.189906] initcall eth_offload_init+0x0/0x16 returned 0 after 1 usecs
[    0.189909] calling  inet_init+0x0/0x24f @ 1
[    0.189947] NET: Registered protocol family 2
[    0.190297] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.190397] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.190514] TCP: Hash tables configured (established 8192 bind 8192)
[    0.190624] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.190701] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.190840] initcall inet_init+0x0/0x24f returned 0 after 903 usecs
[    0.190843] calling  ipv4_offload_init+0x0/0x6e @ 1
[    0.190848] initcall ipv4_offload_init+0x0/0x6e returned 0 after 1 usecs
[    0.190851] calling  af_unix_init+0x0/0x4c @ 1
[    0.190855] NET: Registered protocol family 1
[    0.190928] initcall af_unix_init+0x0/0x4c returned 0 after 71 usecs
[    0.190931] calling  ipv6_offload_init+0x0/0x77 @ 1
[    0.190936] initcall ipv6_offload_init+0x0/0x77 returned 0 after 2 usecs
[    0.190940] calling  pci_apply_final_quirks+0x0/0x118 @ 1
[    0.190957] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.192801] PCI: CLS 64 bytes, default 64
[    0.192806] initcall pci_apply_final_quirks+0x0/0x118 returned 0 after 1817 usecs
[    0.192810] calling  acpi_reserve_resources+0x0/0xcd @ 1
[    0.192819] initcall acpi_reserve_resources+0x0/0xcd returned 0 after 5 usecs
[    0.192822] calling  populate_rootfs+0x0/0xf6 @ 1
[    0.192896] Unpacking initramfs...
[    0.347526] Freeing initrd memory: 18176K
[    0.347731] initcall populate_rootfs+0x0/0xf6 returned 0 after 151268 usecs
[    0.347738] calling  pci_iommu_init+0x0/0x39 @ 1
[    0.347744] initcall pci_iommu_init+0x0/0x39 returned 0 after 1 usecs
[    0.347951] calling  amd_uncore_init+0x0/0x247 @ 1
[    0.347956] initcall amd_uncore_init+0x0/0x247 returned -19 after 1 usecs
[    0.347958] calling  amd_ibs_init+0x0/0x1cf @ 1
[    0.347963] initcall amd_ibs_init+0x0/0x1cf returned -19 after 1 usecs
[    0.347965] calling  msr_init+0x0/0xbe @ 1
[    0.347985] initcall msr_init+0x0/0xbe returned 0 after 15 usecs
[    0.347987] calling  register_kernel_offset_dumper+0x0/0x1b @ 1
[    0.347993] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 1 usecs
[    0.347996] calling  i8259A_init_ops+0x0/0x25 @ 1
[    0.348002] initcall i8259A_init_ops+0x0/0x25 returned 0 after 1 usecs
[    0.348049] calling  init_tsc_clocksource+0x0/0xb8 @ 1
[    0.348060] initcall init_tsc_clocksource+0x0/0xb8 returned 0 after 6 usecs
[    0.348063] calling  add_rtc_cmos+0x0/0x8d @ 1
[    0.348072] initcall add_rtc_cmos+0x0/0x8d returned 0 after 4 usecs
[    0.348074] calling  i8237A_init_ops+0x0/0x16 @ 1
[    0.348088] initcall i8237A_init_ops+0x0/0x16 returned 0 after 9 usecs
[    0.348090] calling  thermal_throttle_init_device+0x0/0x43 @ 1
[    0.348143] initcall thermal_throttle_init_device+0x0/0x43 returned 0 after 48 usecs
[    0.348147] calling  ioapic_init_ops+0x0/0x16 @ 1
[    0.348152] initcall ioapic_init_ops+0x0/0x16 returned 0 after 1 usecs
[    0.348155] calling  register_e820_pmem+0x0/0x45 @ 1
[    0.348169] initcall register_e820_pmem+0x0/0x45 returned 0 after 10 usecs
[    0.348172] calling  add_pcspkr+0x0/0x5a @ 1
[    0.348247] initcall add_pcspkr+0x0/0x5a returned 0 after 68 usecs
[    0.348250] calling  sysfb_init+0x0/0x81 @ 1
[    0.348303] initcall sysfb_init+0x0/0x81 returned 0 after 47 usecs
[    0.348306] calling  pt_dump_init+0x0/0x57 @ 1
[    0.348310] initcall pt_dump_init+0x0/0x57 returned 0 after 1 usecs
[    0.348313] calling  iosf_mbi_init+0x0/0x1b @ 1
[    0.348353] initcall iosf_mbi_init+0x0/0x1b returned 0 after 35 usecs
[    0.348355] calling  proc_execdomains_init+0x0/0x1f @ 1
[    0.348366] initcall proc_execdomains_init+0x0/0x1f returned 0 after 6 usecs
[    0.348368] calling  cpuhp_sysfs_init+0x0/0x5f @ 1
[    0.348384] initcall cpuhp_sysfs_init+0x0/0x5f returned 0 after 12 usecs
[    0.348386] calling  ioresources_init+0x0/0x32 @ 1
[    0.348395] initcall ioresources_init+0x0/0x32 returned 0 after 5 usecs
[    0.348400] calling  init_sched_debug_procfs+0x0/0x29 @ 1
[    0.348406] initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 2 usecs
[    0.348409] calling  snapshot_device_init+0x0/0x14 @ 1
[    0.348492] initcall snapshot_device_init+0x0/0x14 returned 0 after 77 usecs
[    0.348495] calling  irq_gc_init_ops+0x0/0x16 @ 1
[    0.348500] initcall irq_gc_init_ops+0x0/0x16 returned 0 after 1 usecs
[    0.348502] calling  irq_pm_init_ops+0x0/0x16 @ 1
[    0.348507] initcall irq_pm_init_ops+0x0/0x16 returned 0 after 1 usecs
[    0.348510] calling  timekeeping_init_ops+0x0/0x16 @ 1
[    0.348515] initcall timekeeping_init_ops+0x0/0x16 returned 0 after 1 usecs
[    0.348518] calling  init_clocksource_sysfs+0x0/0x5d @ 1
[    0.348579] initcall init_clocksource_sysfs+0x0/0x5d returned 0 after 54 usecs
[    0.348582] calling  init_timer_list_procfs+0x0/0x29 @ 1
[    0.348590] initcall init_timer_list_procfs+0x0/0x29 returned 0 after 4 usecs
[    0.348593] calling  alarmtimer_init+0x0/0x10f @ 1
[    0.348664] initcall alarmtimer_init+0x0/0x10f returned 0 after 65 usecs
[    0.348667] calling  init_posix_timers+0x0/0x29 @ 1
[    0.348700] initcall init_posix_timers+0x0/0x29 returned 0 after 27 usecs
[    0.348703] calling  clockevents_init_sysfs+0x0/0x9e @ 1
[    0.348802] initcall clockevents_init_sysfs+0x0/0x9e returned 0 after 91 usecs
[    0.348804] calling  proc_dma_init+0x0/0x1f @ 1
[    0.348811] initcall proc_dma_init+0x0/0x1f returned 0 after 2 usecs
[    0.348813] calling  proc_modules_init+0x0/0x1f @ 1
[    0.348819] initcall proc_modules_init+0x0/0x1f returned 0 after 2 usecs
[    0.348821] calling  kallsyms_init+0x0/0x22 @ 1
[    0.348826] initcall kallsyms_init+0x0/0x22 returned 0 after 2 usecs
[    0.348829] calling  pid_namespaces_init+0x0/0x3b @ 1
[    0.348850] initcall pid_namespaces_init+0x0/0x3b returned 0 after 16 usecs
[    0.348852] calling  audit_init+0x0/0x148 @ 1
[    0.348856] audit: initializing netlink subsys (disabled)
[    0.349023] initcall audit_init+0x0/0x148 returned 0 after 162 usecs
[    0.349026] calling  audit_watch_init+0x0/0x36 @ 1
[    0.349028] audit: type=2000 audit(1522827066.348:1): state=initialized audit_enabled=0 res=1
[    0.349118] initcall audit_watch_init+0x0/0x36 returned 0 after 1 usecs
[    0.349120] calling  audit_fsnotify_init+0x0/0x36 @ 1
[    0.349125] initcall audit_fsnotify_init+0x0/0x36 returned 0 after 1 usecs
[    0.349127] calling  audit_tree_init+0x0/0x40 @ 1
[    0.349133] initcall audit_tree_init+0x0/0x40 returned 0 after 2 usecs
[    0.349135] calling  init_kprobes+0x0/0x1a2 @ 1
[    0.349362] initcall init_kprobes+0x0/0x1a2 returned 0 after 217 usecs
[    0.349364] calling  seccomp_sysctl_init+0x0/0x2a @ 1
[    0.349374] initcall seccomp_sysctl_init+0x0/0x2a returned 0 after 6 usecs
[    0.349376] calling  utsname_sysctl_init+0x0/0x16 @ 1
[    0.349388] initcall utsname_sysctl_init+0x0/0x16 returned 0 after 7 usecs
[    0.349390] calling  init_tracepoints+0x0/0x2b @ 1
[    0.349394] initcall init_tracepoints+0x0/0x2b returned 0 after 1 usecs
[    0.349397] calling  stack_trace_init+0x0/0x9e @ 1
[    0.349423] initcall stack_trace_init+0x0/0x9e returned 0 after 21 usecs
[    0.349425] calling  init_mmio_trace+0x0/0xf @ 1
[    0.349432] initcall init_mmio_trace+0x0/0xf returned 0 after 3 usecs
[    0.349434] calling  init_blk_tracer+0x0/0x4d @ 1
[    0.349447] initcall init_blk_tracer+0x0/0x4d returned 0 after 8 usecs
[    0.349450] calling  perf_event_sysfs_init+0x0/0x78 @ 1
[    0.349605] initcall perf_event_sysfs_init+0x0/0x78 returned 0 after 146 usecs
[    0.349607] calling  init_uprobes+0x0/0x56 @ 1
[    0.349615] initcall init_uprobes+0x0/0x56 returned 0 after 4 usecs
[    0.349617] calling  padata_driver_init+0x0/0x35 @ 1
[    0.349622] initcall padata_driver_init+0x0/0x35 returned 0 after 1 usecs
[    0.349625] calling  kswapd_init+0x0/0x3b @ 1
[    0.349667] initcall kswapd_init+0x0/0x3b returned 0 after 36 usecs
[    0.349670] calling  extfrag_debug_init+0x0/0x71 @ 1
[    0.349683] initcall extfrag_debug_init+0x0/0x71 returned 0 after 9 usecs
[    0.349686] calling  mm_compute_batch_init+0x0/0x3b @ 1
[    0.349691] initcall mm_compute_batch_init+0x0/0x3b returned 0 after 1 usecs
[    0.349694] calling  slab_proc_init+0x0/0x22 @ 1
[    0.349701] initcall slab_proc_init+0x0/0x22 returned 0 after 3 usecs
[    0.349703] calling  workingset_init+0x0/0x7b @ 1
[    0.349706] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    0.349778] initcall workingset_init+0x0/0x7b returned 0 after 70 usecs
[    0.349780] calling  proc_vmalloc_init+0x0/0x22 @ 1
[    0.349786] initcall proc_vmalloc_init+0x0/0x22 returned 0 after 2 usecs
[    0.349789] calling  procswaps_init+0x0/0x1f @ 1
[    0.349794] initcall procswaps_init+0x0/0x1f returned 0 after 2 usecs
[    0.349796] calling  init_frontswap+0x0/0x82 @ 1
[    0.349813] initcall init_frontswap+0x0/0x82 returned 0 after 13 usecs
[    0.349816] calling  slab_proc_init+0x0/0xc @ 1
[    0.349820] initcall slab_proc_init+0x0/0xc returned 0 after 1 usecs
[    0.349823] calling  cpucache_init+0x0/0x3f @ 1
[    0.349850] initcall cpucache_init+0x0/0x3f returned 0 after 22 usecs
[    0.349852] calling  init_zbud+0x0/0x20 @ 1
[    0.349854] zbud: loaded
[    0.349918] initcall init_zbud+0x0/0x20 returned 0 after 61 usecs
[    0.349921] calling  fcntl_init+0x0/0x29 @ 1
[    0.349926] initcall fcntl_init+0x0/0x29 returned 0 after 1 usecs
[    0.349929] calling  proc_filesystems_init+0x0/0x1f @ 1
[    0.349935] initcall proc_filesystems_init+0x0/0x1f returned 0 after 2 usecs
[    0.349938] calling  start_dirtytime_writeback+0x0/0x2c @ 1
[    0.349944] initcall start_dirtytime_writeback+0x0/0x2c returned 0 after 2 usecs
[    0.349947] calling  blkdev_init+0x0/0x2b @ 1
[    0.349959] initcall blkdev_init+0x0/0x2b returned 0 after 9 usecs
[    0.349962] calling  dio_init+0x0/0x2c @ 1
[    0.349967] initcall dio_init+0x0/0x2c returned 0 after 1 usecs
[    0.349970] calling  dnotify_init+0x0/0x6f @ 1
[    0.349976] initcall dnotify_init+0x0/0x6f returned 0 after 3 usecs
[    0.349979] calling  fanotify_user_setup+0x0/0x6c @ 1
[    0.349986] initcall fanotify_user_setup+0x0/0x6c returned 0 after 3 usecs
[    0.349989] calling  userfaultfd_init+0x0/0x2c @ 1
[    0.350002] initcall userfaultfd_init+0x0/0x2c returned 0 after 8 usecs
[    0.350004] calling  aio_setup+0x0/0x91 @ 1
[    0.350024] initcall aio_setup+0x0/0x91 returned 0 after 16 usecs
[    0.350027] calling  init_devpts_fs+0x0/0x28 @ 1
[    0.350044] initcall init_devpts_fs+0x0/0x28 returned 0 after 12 usecs
[    0.350047] calling  init_pstore_fs+0x0/0x42 @ 1
[    0.350054] initcall init_pstore_fs+0x0/0x42 returned 0 after 3 usecs
[    0.350057] calling  ipc_init+0x0/0x51 @ 1
[    0.350069] initcall ipc_init+0x0/0x51 returned 0 after 8 usecs
[    0.350072] calling  ipc_sysctl_init+0x0/0x16 @ 1
[    0.350089] initcall ipc_sysctl_init+0x0/0x16 returned 0 after 13 usecs
[    0.350092] calling  init_mqueue_fs+0x0/0xf1 @ 1
[    0.350136] initcall init_mqueue_fs+0x0/0xf1 returned 0 after 38 usecs
[    0.350139] calling  key_proc_init+0x0/0x50 @ 1
[    0.350147] initcall key_proc_init+0x0/0x50 returned 0 after 4 usecs
[    0.350150] calling  selinux_nf_ip_init+0x0/0x3c @ 1
[    0.350155] initcall selinux_nf_ip_init+0x0/0x3c returned 0 after 1 usecs
[    0.350157] calling  init_sel_fs+0x0/0x8b @ 1
[    0.350163] initcall init_sel_fs+0x0/0x8b returned 0 after 1 usecs
[    0.350165] calling  selnl_init+0x0/0x6e @ 1
[    0.350175] initcall selnl_init+0x0/0x6e returned 0 after 6 usecs
[    0.350178] calling  sel_netif_init+0x0/0x36 @ 1
[    0.350183] initcall sel_netif_init+0x0/0x36 returned 0 after 1 usecs
[    0.350185] calling  sel_netnode_init+0x0/0x30 @ 1
[    0.350190] initcall sel_netnode_init+0x0/0x30 returned 0 after 0 usecs
[    0.350193] calling  sel_netport_init+0x0/0x30 @ 1
[    0.350198] initcall sel_netport_init+0x0/0x30 returned 0 after 0 usecs
[    0.350200] calling  aurule_init+0x0/0x2a @ 1
[    0.350205] initcall aurule_init+0x0/0x2a returned 0 after 1 usecs
[    0.350208] calling  crypto_algapi_init+0x0/0x11 @ 1
[    0.350213] initcall crypto_algapi_init+0x0/0x11 returned 0 after 2 usecs
[    0.350217] calling  rsa_init+0x0/0x40 @ 1
[    0.350273] alg: self-tests disabled
[    0.350352] initcall rsa_init+0x0/0x40 returned 0 after 127 usecs
[    0.350356] calling  hmac_module_init+0x0/0x14 @ 1
[    0.350361] initcall hmac_module_init+0x0/0x14 returned 0 after 1 usecs
[    0.350363] calling  crypto_null_mod_init+0x0/0x46 @ 1
[    0.350576] initcall crypto_null_mod_init+0x0/0x46 returned 0 after 202 usecs
[    0.350578] calling  md5_mod_init+0x0/0x14 @ 1
[    0.350632] initcall md5_mod_init+0x0/0x14 returned 0 after 48 usecs
[    0.350635] calling  sha1_generic_mod_init+0x0/0x14 @ 1
[    0.350687] initcall sha1_generic_mod_init+0x0/0x14 returned 0 after 47 usecs
[    0.350689] calling  sha256_generic_mod_init+0x0/0x19 @ 1
[    0.350788] initcall sha256_generic_mod_init+0x0/0x19 returned 0 after 92 usecs
[    0.350790] calling  aes_init+0x0/0x14 @ 1
[    0.350843] initcall aes_init+0x0/0x14 returned 0 after 48 usecs
[    0.350845] calling  crct10dif_mod_init+0x0/0x14 @ 1
[    0.350896] initcall crct10dif_mod_init+0x0/0x14 returned 0 after 45 usecs
[    0.350898] calling  lzo_mod_init+0x0/0x38 @ 1
[    0.350998] initcall lzo_mod_init+0x0/0x38 returned 0 after 94 usecs
[    0.351001] calling  asymmetric_key_init+0x0/0x14 @ 1
[    0.351004] Key type asymmetric registered
[    0.351071] initcall asymmetric_key_init+0x0/0x14 returned 0 after 65 usecs
[    0.351073] calling  x509_key_init+0x0/0x14 @ 1
[    0.351076] Asymmetric key parser 'x509' registered
[    0.351143] initcall x509_key_init+0x0/0x14 returned 0 after 65 usecs
[    0.351146] calling  proc_genhd_init+0x0/0x32 @ 1
[    0.351154] initcall proc_genhd_init+0x0/0x32 returned 0 after 4 usecs
[    0.351156] calling  init_emergency_pool+0x0/0x91 @ 1
[    0.351176] bounce: pool size: 64 pages
[    0.351250] initcall init_emergency_pool+0x0/0x91 returned 0 after 88 usecs
[    0.351253] calling  bsg_init+0x0/0x12f @ 1
[    0.351267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.351352] initcall bsg_init+0x0/0x12f returned 0 after 92 usecs
[    0.351354] calling  throtl_init+0x0/0x3c @ 1
[    0.351417] initcall throtl_init+0x0/0x3c returned 0 after 57 usecs
[    0.351420] calling  noop_init+0x0/0x14 @ 1
[    0.351423] io scheduler noop registered
[    0.351489] initcall noop_init+0x0/0x14 returned 0 after 64 usecs
[    0.351491] calling  deadline_init+0x0/0x14 @ 1
[    0.351494] io scheduler deadline registered
[    0.351560] initcall deadline_init+0x0/0x14 returned 0 after 63 usecs
[    0.351562] calling  cfq_init+0x0/0x6e @ 1
[    0.351588] io scheduler cfq registered (default)
[    0.351655] initcall cfq_init+0x0/0x6e returned 0 after 87 usecs
[    0.351657] calling  deadline_init+0x0/0x14 @ 1
[    0.351660] io scheduler mq-deadline registered
[    0.351726] initcall deadline_init+0x0/0x14 returned 0 after 63 usecs
[    0.351729] calling  btree_module_init+0x0/0x24 @ 1
[    0.351734] initcall btree_module_init+0x0/0x24 returned 0 after 1 usecs
[    0.351736] calling  crc_t10dif_mod_init+0x0/0x35 @ 1
[    0.351743] initcall crc_t10dif_mod_init+0x0/0x35 returned 0 after 3 usecs
[    0.351745] calling  percpu_counter_startup+0x0/0x50 @ 1
[    0.351771] initcall percpu_counter_startup+0x0/0x50 returned 0 after 21 usecs
[    0.351774] calling  audit_classes_init+0x0/0x4f @ 1
[    0.351781] initcall audit_classes_init+0x0/0x4f returned 0 after 3 usecs
[    0.351783] calling  digsig_init+0x0/0x34 @ 1
[    0.351789] initcall digsig_init+0x0/0x34 returned 0 after 2 usecs
[    0.351791] calling  sg_pool_init+0x0/0xb1 @ 1
[    0.351808] initcall sg_pool_init+0x0/0xb1 returned 0 after 13 usecs
[    0.351811] calling  phy_core_init+0x0/0x44 @ 1
[    0.351821] initcall phy_core_init+0x0/0x44 returned 0 after 6 usecs
[    0.351824] calling  pci_proc_init+0x0/0x5d @ 1
[    0.351884] initcall pci_proc_init+0x0/0x5d returned 0 after 55 usecs
[    0.351886] calling  pcie_portdrv_init+0x0/0x6e @ 1
[    0.353489] initcall pcie_portdrv_init+0x0/0x6e returned 0 after 1559 usecs
[    0.353492] calling  aer_service_init+0x0/0x3c @ 1
[    0.353507] initcall aer_service_init+0x0/0x3c returned 0 after 10 usecs
[    0.353510] calling  pcie_pme_service_init+0x0/0x14 @ 1
[    0.353551] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    0.353659] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    0.353763] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[    0.353875] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[    0.353965] initcall pcie_pme_service_init+0x0/0x14 returned 0 after 440 usecs
[    0.353968] calling  dpc_service_init+0x0/0x14 @ 1
[    0.353982] initcall dpc_service_init+0x0/0x14 returned 0 after 9 usecs
[    0.353984] calling  pci_hotplug_init+0x0/0x35 @ 1
[    0.353989] initcall pci_hotplug_init+0x0/0x35 returned 0 after 1 usecs
[    0.353991] calling  pcied_init+0x0/0x56 @ 1
[    0.354013] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    0.354159] initcall pcied_init+0x0/0x56 returned 0 after 159 usecs
[    0.354162] calling  xenfb_init+0x0/0x49 @ 1
[    0.354166] initcall xenfb_init+0x0/0x49 returned -19 after 0 usecs
[    0.354169] calling  vesafb_driver_init+0x0/0x16 @ 1
[    0.354189] initcall vesafb_driver_init+0x0/0x16 returned 0 after 15 usecs
[    0.354191] calling  efifb_driver_init+0x0/0x16 @ 1
[    0.354206] initcall efifb_driver_init+0x0/0x16 returned 0 after 10 usecs
[    0.354208] calling  intel_idle_init+0x0/0x4f5 @ 1
[    0.354213] intel_idle: does not run on family 6 model 14
[    0.354217] initcall intel_idle_init+0x0/0x4f5 returned -19 after 4 usecs
[    0.354220] calling  acpi_processor_driver_init+0x0/0x8d @ 1
[    0.354767] Monitor-Mwait will be used to enter C-1 state
[    0.354777] Monitor-Mwait will be used to enter C-2 state
[    0.354782] Monitor-Mwait will be used to enter C-3 state
[    0.354787] tsc: Marking TSC unstable due to TSC halts in idle
[    0.355235] initcall acpi_processor_driver_init+0x0/0x8d returned 0 after 983 usecs
[    0.355239] calling  acpi_hed_driver_init+0x0/0x14 @ 1
[    0.355297] initcall acpi_hed_driver_init+0x0/0x14 returned 0 after 52 usecs
[    0.355299] calling  erst_init+0x0/0x2e1 @ 1
[    0.355305] initcall erst_init+0x0/0x2e1 returned 0 after 2 usecs
[    0.355307] calling  ghes_init+0x0/0x18d @ 1
[    0.355312] initcall ghes_init+0x0/0x18d returned -19 after 1 usecs
[    0.355314] calling  extlog_init+0x0/0x359 @ 1
[    0.355319] initcall extlog_init+0x0/0x359 returned -19 after 1 usecs
[    0.355321] calling  pnpbios_thread_init+0x0/0x62 @ 1
[    0.355325] initcall pnpbios_thread_init+0x0/0x62 returned 0 after 1 usecs
[    0.355328] calling  isapnp_init+0x0/0xb2f @ 1
[    0.355330] isapnp: ISA Plug & Play support disabled
[    0.355398] initcall isapnp_init+0x0/0xb2f returned 0 after 65 usecs
[    0.355400] calling  gpio_clk_driver_init+0x0/0x16 @ 1
[    0.355422] initcall gpio_clk_driver_init+0x0/0x16 returned 0 after 18 usecs
[    0.355425] calling  plt_clk_driver_init+0x0/0x16 @ 1
[    0.355441] initcall plt_clk_driver_init+0x0/0x16 returned 0 after 12 usecs
[    0.355444] calling  xenbus_probe_initcall+0x0/0x4d @ 1
[    0.355448] initcall xenbus_probe_initcall+0x0/0x4d returned -19 after 1 usecs
[    0.355450] calling  xenbus_init+0x0/0x39 @ 1
[    0.355455] initcall xenbus_init+0x0/0x39 returned -19 after 1 usecs
[    0.355457] calling  xenbus_backend_init+0x0/0x48 @ 1
[    0.355461] initcall xenbus_backend_init+0x0/0x48 returned -19 after 0 usecs
[    0.355464] calling  hypervisor_subsys_init+0x0/0x26 @ 1
[    0.355468] initcall hypervisor_subsys_init+0x0/0x26 returned -19 after 1 usecs
[    0.355471] calling  hyper_sysfs_init+0x0/0x149 @ 1
[    0.355475] initcall hyper_sysfs_init+0x0/0x149 returned -19 after 1 usecs
[    0.355477] calling  platform_driver_init+0x0/0x1b @ 1
[    0.355511] initcall platform_driver_init+0x0/0x1b returned 0 after 28 usecs
[    0.355513] calling  n_null_init+0x0/0x21 @ 1
[    0.355518] initcall n_null_init+0x0/0x21 returned 0 after 1 usecs
[    0.355520] calling  pty_init+0x0/0x1e0 @ 1
[    0.355610] initcall pty_init+0x0/0x1e0 returned 0 after 84 usecs
[    0.355613] calling  sysrq_init+0x0/0x68 @ 1
[    0.355621] initcall sysrq_init+0x0/0x68 returned 0 after 5 usecs
[    0.355624] calling  xen_hvc_init+0x0/0x215 @ 1
[    0.355628] initcall xen_hvc_init+0x0/0x215 returned -19 after 1 usecs
[    0.355630] calling  serial8250_init+0x0/0x131 @ 1
[    0.355634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.355928] 00:06: ttyS0 at I/O 0x200 (irq = 5, base_baud = 921600) is a NS16550A
[    0.356549] initcall serial8250_init+0x0/0x131 returned 0 after 892 usecs
[    0.356553] calling  serial_pci_driver_init+0x0/0x1b @ 1
[    0.356603] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 45 usecs
[    0.356606] calling  exar_pci_driver_init+0x0/0x1b @ 1
[    0.356628] initcall exar_pci_driver_init+0x0/0x1b returned 0 after 17 usecs
[    0.356630] calling  dw8250_platform_driver_init+0x0/0x16 @ 1
[    0.356651] initcall dw8250_platform_driver_init+0x0/0x16 returned 0 after 16 usecs
[    0.356654] calling  mid8250_pci_driver_init+0x0/0x1b @ 1
[    0.356674] initcall mid8250_pci_driver_init+0x0/0x1b returned 0 after 16 usecs
[    0.356676] calling  hpet_init+0x0/0x5c @ 1
[    0.356915] initcall hpet_init+0x0/0x5c returned 0 after 228 usecs
[    0.356918] calling  agp_init+0x0/0x29 @ 1
[    0.356920] Linux agpgart interface v0.103
[    0.356987] initcall agp_init+0x0/0x29 returned 0 after 63 usecs
[    0.356989] calling  agp_ali_init+0x0/0x2a @ 1
[    0.357011] initcall agp_ali_init+0x0/0x2a returned 0 after 17 usecs
[    0.357013] calling  agp_ati_init+0x0/0x2a @ 1
[    0.357033] initcall agp_ati_init+0x0/0x2a returned 0 after 15 usecs
[    0.357035] calling  agp_amdk7_init+0x0/0x2a @ 1
[    0.357055] initcall agp_amdk7_init+0x0/0x2a returned 0 after 15 usecs
[    0.357057] calling  agp_amd64_mod_init+0x0/0xf @ 1
[    0.357120] initcall agp_amd64_mod_init+0x0/0xf returned -19 after 57 usecs
[    0.357123] calling  agp_efficeon_init+0x0/0x3f @ 1
[    0.357143] initcall agp_efficeon_init+0x0/0x3f returned 0 after 16 usecs
[    0.357146] calling  agp_intel_init+0x0/0x2a @ 1
[    0.357227] initcall agp_intel_init+0x0/0x2a returned 0 after 75 usecs
[    0.357230] calling  agp_nvidia_init+0x0/0x2a @ 1
[    0.357250] initcall agp_nvidia_init+0x0/0x2a returned 0 after 16 usecs
[    0.357252] calling  agp_sis_init+0x0/0x2a @ 1
[    0.357273] initcall agp_sis_init+0x0/0x2a returned 0 after 17 usecs
[    0.357276] calling  agp_serverworks_init+0x0/0x2a @ 1
[    0.357299] initcall agp_serverworks_init+0x0/0x2a returned 0 after 18 usecs
[    0.357301] calling  agp_via_init+0x0/0x2a @ 1
[    0.357323] initcall agp_via_init+0x0/0x2a returned 0 after 18 usecs
[    0.357326] calling  init_tis+0x0/0xe9 @ 1
[    0.357357] initcall init_tis+0x0/0xe9 returned 0 after 27 usecs
[    0.357360] calling  cn_proc_init+0x0/0x35 @ 1
[    0.357366] initcall cn_proc_init+0x0/0x35 returned 0 after 2 usecs
[    0.357369] calling  topology_sysfs_init+0x0/0x30 @ 1
[    0.357391] initcall topology_sysfs_init+0x0/0x30 returned 0 after 17 usecs
[    0.357394] calling  cacheinfo_sysfs_init+0x0/0x2a @ 1
[    0.357646] initcall cacheinfo_sysfs_init+0x0/0x2a returned 165 after 241 usecs
[    0.357649] calling  devcoredump_init+0x0/0x19 @ 1
[    0.357661] initcall devcoredump_init+0x0/0x19 returned 0 after 8 usecs
[    0.357665] calling  net_olddevs_init+0x0/0x53 @ 1
[    0.357674] initcall net_olddevs_init+0x0/0x53 returned 0 after 5 usecs
[    0.357677] calling  i8042_init+0x0/0x404 @ 1
[    0.357742] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.367928] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.368001] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.368212] initcall i8042_init+0x0/0x404 returned 0 after 10283 usecs
[    0.368215] calling  input_leds_init+0x0/0x14 @ 1
[    0.368221] initcall input_leds_init+0x0/0x14 returned 0 after 1 usecs
[    0.368223] calling  mousedev_init+0x0/0x7a @ 1
[    0.368363] mousedev: PS/2 mouse device common for all mice
[    0.368433] initcall mousedev_init+0x0/0x7a returned 0 after 200 usecs
[    0.368435] calling  atkbd_init+0x0/0x25 @ 1
[    0.368461] initcall atkbd_init+0x0/0x25 returned 0 after 21 usecs
[    0.368464] calling  xenkbd_init+0x0/0x49 @ 1
[    0.368469] initcall xenkbd_init+0x0/0x49 returned -19 after 1 usecs
[    0.368471] calling  cmos_init+0x0/0x65 @ 1
[    0.368528] rtc_cmos 00:03: RTC can wake from S4
[    0.368795] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.368894] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.368992] initcall cmos_init+0x0/0x65 returned 0 after 504 usecs
[    0.368995] calling  intel_pstate_init+0x0/0x2a2 @ 1
[    0.369001] initcall intel_pstate_init+0x0/0x2a2 returned -19 after 1 usecs
[    0.369004] calling  ledtrig_disk_init+0x0/0x2a @ 1
[    0.369011] initcall ledtrig_disk_init+0x0/0x2a returned 0 after 3 usecs
[    0.369014] calling  ledtrig_mtd_init+0x0/0x2a @ 1
[    0.369020] initcall ledtrig_mtd_init+0x0/0x2a returned 0 after 2 usecs
[    0.369023] calling  ledtrig_cpu_init+0x0/0xba @ 1
[    0.369064] ledtrig-cpu: registered to indicate activity on CPUs
[    0.369134] initcall ledtrig_cpu_init+0x0/0xba returned 0 after 104 usecs
[    0.369137] calling  ledtrig_panic_init+0x0/0x34 @ 1
[    0.369146] initcall ledtrig_panic_init+0x0/0x34 returned 0 after 4 usecs
[    0.369148] calling  dmi_sysfs_init+0x0/0xaf @ 1
[    0.369229] initcall dmi_sysfs_init+0x0/0xaf returned 0 after 75 usecs
[    0.369232] calling  efi_load_efivars+0x0/0x5d @ 1
[    0.369236] initcall efi_load_efivars+0x0/0x5d returned 0 after 1 usecs
[    0.369238] calling  esrt_sysfs_init+0x0/0x2ac @ 1
[    0.369243] initcall esrt_sysfs_init+0x0/0x2ac returned -38 after 1 usecs
[    0.369246] calling  efi_capsule_loader_init+0x0/0x39 @ 1
[    0.369250] initcall efi_capsule_loader_init+0x0/0x39 returned -19 after 1 usecs
[    0.369252] calling  pmc_atom_init+0x0/0x234 @ 1
[    0.369268] initcall pmc_atom_init+0x0/0x234 returned -19 after 12 usecs
[    0.369270] calling  powercap_init+0x0/0x20d @ 1
[    0.369337] initcall powercap_init+0x0/0x20d returned 0 after 61 usecs
[    0.369341] calling  pm_check_save_msr+0x0/0x20 @ 1
[    0.369347] initcall pm_check_save_msr+0x0/0x20 returned 0 after 1 usecs
[    0.369349] calling  sock_diag_init+0x0/0x34 @ 1
[    0.369383] initcall sock_diag_init+0x0/0x34 returned 0 after 28 usecs
[    0.369386] calling  blackhole_init+0x0/0x14 @ 1
[    0.369392] initcall blackhole_init+0x0/0x14 returned 0 after 2 usecs
[    0.369395] calling  gre_offload_init+0x0/0x47 @ 1
[    0.369401] initcall gre_offload_init+0x0/0x47 returned 0 after 1 usecs
[    0.369403] calling  sysctl_ipv4_init+0x0/0x45 @ 1
[    0.369499] initcall sysctl_ipv4_init+0x0/0x45 returned 0 after 89 usecs
[    0.369502] calling  cubictcp_register+0x0/0x79 @ 1
[    0.369508] initcall cubictcp_register+0x0/0x79 returned 0 after 1 usecs
[    0.369510] calling  inet6_init+0x0/0x333 @ 1
[    0.369559] NET: Registered protocol family 10
[    0.370035] Segment Routing with IPv6
[    0.370131] initcall inet6_init+0x0/0x333 returned 0 after 601 usecs
[    0.370134] calling  mip6_init+0x0/0xac @ 1
[    0.370136] mip6: Mobile IPv6
[    0.370209] initcall mip6_init+0x0/0xac returned 0 after 69 usecs
[    0.370212] calling  packet_init+0x0/0x3e @ 1
[    0.370221] NET: Registered protocol family 17
[    0.371088] initcall packet_init+0x0/0x3e returned 0 after 852 usecs
[    0.371090] calling  dcbnl_init+0x0/0x4a @ 1
[    0.371095] initcall dcbnl_init+0x0/0x4a returned 0 after 1 usecs
[    0.371097] calling  mpls_gso_init+0x0/0x2a @ 1
[    0.371099] mpls_gso: MPLS GSO support
[    0.371165] initcall mpls_gso_init+0x0/0x2a returned 0 after 63 usecs
[    0.371168] calling  mcheck_init_device+0x0/0x105 @ 1
[    0.371329] initcall mcheck_init_device+0x0/0x105 returned 0 after 153 usecs
[    0.371533] calling  mcheck_late_init+0x0/0x69 @ 1
[    0.371546] initcall mcheck_late_init+0x0/0x69 returned 0 after 8 usecs
[    0.371548] calling  severities_debugfs_init+0x0/0x3a @ 1
[    0.371555] initcall severities_debugfs_init+0x0/0x3a returned 0 after 2 usecs
[    0.371557] calling  threshold_init_device+0x0/0x47 @ 1
[    0.371562] initcall threshold_init_device+0x0/0x47 returned 0 after 1 usecs
[    0.371564] calling  microcode_init+0x0/0x1ba @ 1
[    0.371607] microcode: sig=0x6ec, pf=0x20, revision=0x54
[    0.371791] microcode: Microcode Update Driver: v2.2.
[    0.371796] initcall microcode_init+0x0/0x1ba returned 0 after 222 usecs
[    0.371863] calling  hpet_insert_resource+0x0/0x24 @ 1
[    0.371869] initcall hpet_insert_resource+0x0/0x24 returned 0 after 1 usecs
[    0.371871] calling  update_mp_table+0x0/0x4c2 @ 1
[    0.371877] initcall update_mp_table+0x0/0x4c2 returned 0 after 1 usecs
[    0.371879] calling  lapic_insert_resource+0x0/0x4c @ 1
[    0.371885] initcall lapic_insert_resource+0x0/0x4c returned 0 after 1 usecs
[    0.371887] calling  print_ICs+0x0/0x193 @ 1
[    0.371892] initcall print_ICs+0x0/0x193 returned 0 after 1 usecs
[    0.371895] calling  print_ipi_mode+0x0/0x2b @ 1
[    0.371897] Using IPI No-Shortcut mode
[    0.371962] initcall print_ipi_mode+0x0/0x2b returned 0 after 62 usecs
[    0.371965] calling  pat_memtype_list_init+0x0/0x36 @ 1
[    0.371970] initcall pat_memtype_list_init+0x0/0x36 returned 0 after 1 usecs
[    0.371972] calling  create_tlb_single_page_flush_ceiling+0x0/0x28 @ 1
[    0.371985] initcall create_tlb_single_page_flush_ceiling+0x0/0x28 returned 0 after 8 usecs
[    0.371989] calling  init_oops_id+0x0/0x50 @ 1
[    0.371995] initcall init_oops_id+0x0/0x50 returned 0 after 2 usecs
[    0.371998] calling  sched_clock_init_late+0x0/0x95 @ 1
[    0.372027] initcall sched_clock_init_late+0x0/0x95 returned 0 after 2 usecs
[    0.372030] calling  sched_init_debug+0x0/0x3a @ 1
[    0.372039] initcall sched_init_debug+0x0/0x3a returned 0 after 5 usecs
[    0.372042] calling  pm_qos_power_init+0x0/0x98 @ 1
[    0.372299] initcall pm_qos_power_init+0x0/0x98 returned 0 after 246 usecs
[    0.372302] calling  pm_debugfs_init+0x0/0x24 @ 1
[    0.372308] initcall pm_debugfs_init+0x0/0x24 returned 0 after 3 usecs
[    0.372311] calling  printk_late_init+0x0/0x106 @ 1
[    0.372317] initcall printk_late_init+0x0/0x106 returned 0 after 1 usecs
[    0.372320] calling  tk_debug_sleep_time_init+0x0/0x3c @ 1
[    0.372326] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 2 usecs
[    0.372329] calling  debugfs_kprobe_init+0x0/0xb7 @ 1
[    0.372360] initcall debugfs_kprobe_init+0x0/0xb7 returned 0 after 26 usecs
[    0.372363] calling  taskstats_init+0x0/0x38 @ 1
[    0.372370] registered taskstats version 1
[    0.372437] initcall taskstats_init+0x0/0x38 returned 0 after 69 usecs
[    0.372440] calling  fault_around_debugfs+0x0/0x35 @ 1
[    0.372447] initcall fault_around_debugfs+0x0/0x35 returned 0 after 3 usecs
[    0.372449] calling  max_swapfiles_check+0x0/0xc @ 1
[    0.372454] initcall max_swapfiles_check+0x0/0xc returned 0 after 1 usecs
[    0.372456] calling  init_zswap+0x0/0x3b3 @ 1
[    0.372477] zswap: loaded using pool lzo/zbud
[    0.372709] initcall init_zswap+0x0/0x3b3 returned 0 after 243 usecs
[    0.372712] calling  split_huge_pages_debugfs+0x0/0x35 @ 1
[    0.372718] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 2 usecs
[    0.372721] calling  check_early_ioremap_leak+0x0/0x38 @ 1
[    0.372726] initcall check_early_ioremap_leak+0x0/0x38 returned 0 after 1 usecs
[    0.372729] calling  init_root_keyring+0x0/0xf @ 1
[    0.372749] initcall init_root_keyring+0x0/0xf returned 0 after 15 usecs
[    0.372751] calling  init_profile_hash+0x0/0x72 @ 1
[    0.372756] initcall init_profile_hash+0x0/0x72 returned 0 after 1 usecs
[    0.372758] calling  init_ima+0x0/0x37 @ 1
[    0.372763] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.372860] initcall init_ima+0x0/0x37 returned 0 after 95 usecs
[    0.372862] calling  prandom_reseed+0x0/0x27 @ 1
[    0.372871] initcall prandom_reseed+0x0/0x27 returned 0 after 4 usecs
[    0.372874] calling  pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
[    0.372881] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 3 usecs
[    0.372883] calling  pci_sysfs_init+0x0/0x47 @ 1
[    0.373296] initcall pci_sysfs_init+0x0/0x47 returned 0 after 398 usecs
[    0.373299] calling  bert_init+0x0/0x1cc @ 1
[    0.373304] initcall bert_init+0x0/0x1cc returned 0 after 1 usecs
[    0.373306] calling  clk_debug_init+0x0/0x110 @ 1
[    0.373323] initcall clk_debug_init+0x0/0x110 returned 0 after 12 usecs
[    0.373325] calling  boot_wait_for_devices+0x0/0x2d @ 1
[    0.373330] initcall boot_wait_for_devices+0x0/0x2d returned -19 after 1 usecs
[    0.373334] calling  deferred_probe_initcall+0x0/0x30 @ 1
[    0.373346] initcall deferred_probe_initcall+0x0/0x30 returned 0 after 7 usecs
[    0.373349] calling  pm_genpd_debug_init+0x0/0x116 @ 1
[    0.373357] initcall pm_genpd_debug_init+0x0/0x116 returned 0 after 4 usecs
[    0.373360] calling  genpd_power_off_unused+0x0/0x68 @ 1
[    0.373365] initcall genpd_power_off_unused+0x0/0x68 returned 0 after 1 usecs
[    0.373367] calling  rtc_hctosys+0x0/0xdf @ 1
[    0.373421] rtc_cmos 00:03: setting system clock to 2018-04-04 07:31:06 UTC (1522827066)
[    0.373508] initcall rtc_hctosys+0x0/0xdf returned 0 after 133 usecs
[    0.373510] calling  firmware_memmap_init+0x0/0x2d @ 1
[    0.373550] initcall firmware_memmap_init+0x0/0x2d returned 0 after 35 usecs
[    0.373554] calling  register_update_efi_random_seed+0x0/0x30 @ 1
[    0.373559] initcall register_update_efi_random_seed+0x0/0x30 returned 0 after 1 usecs
[    0.373561] calling  efi_shutdown_init+0x0/0x3c @ 1
[    0.373566] initcall efi_shutdown_init+0x0/0x3c returned -19 after 1 usecs
[    0.373569] calling  pci_mmcfg_late_insert_resources+0x0/0x49 @ 1
[    0.373574] initcall pci_mmcfg_late_insert_resources+0x0/0x49 returned 0 after 2 usecs
[    0.373577] calling  tcp_congestion_default+0x0/0x14 @ 1
[    0.373583] initcall tcp_congestion_default+0x0/0x14 returned 0 after 1 usecs
[    0.373586] calling  software_resume+0x0/0x2a0 @ 1
[    0.373592] initcall software_resume+0x0/0x2a0 returned -2 after 1 usecs
[    0.373594] calling  clear_boot_tracer+0x0/0x2a @ 1
[    0.373599] initcall clear_boot_tracer+0x0/0x2a returned 0 after 1 usecs
[    0.373603] calling  clk_disable_unused+0x0/0x100 @ 1
[    0.373609] initcall clk_disable_unused+0x0/0x100 returned 0 after 2 usecs
[    0.374829] Freeing unused kernel memory: 840K
[    0.374966] Write protecting the kernel text: 6164k
[    0.375162] Write protecting the kernel read-only data: 1936k
[    0.375228] NX-protecting the kernel data: 4076k
[    0.375698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.376107] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.578600] calling  acpi_button_driver_init+0x0/0x1000 [button] @ 84
[    0.578737] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input2
[    0.579210] ACPI: Sleep Button [SLPB]
[    0.580208] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input3
[    0.583824] ACPI: Lid Switch [LID]
[    0.584122] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    0.584198] calling  acpi_thermal_init+0x0/0x1000 [thermal] @ 81
[    0.584274] ACPI: Power Button [PWRF]
[    0.584384] initcall acpi_button_driver_init+0x0/0x1000 [button] returned 0 after 5639 usecs
[    0.586133] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.586880] thermal LNXTHERM:00: registered as thermal_zone0
[    0.586949] ACPI: Thermal Zone [THM0] (47 C)
[    0.587455] calling  acpi_video_init+0x0/0x1000 [video] @ 85
[    0.587481] initcall acpi_video_init+0x0/0x1000 [video] returned 0 after 18 usecs
[    0.588939] thermal LNXTHERM:01: registered as thermal_zone1
[    0.589010] ACPI: Thermal Zone [THM1] (43 C)
[    0.589119] initcall acpi_thermal_init+0x0/0x1000 [thermal] returned 0 after 4795 usecs
[    0.592573] calling  acpi_fan_driver_init+0x0/0x1000 [fan] @ 80
[    0.594773] initcall acpi_fan_driver_init+0x0/0x1000 [fan] returned 0 after 2141 usecs
[    0.607161] calling  init_scsi+0x0/0x79 [scsi_mod] @ 88
[    0.607287] SCSI subsystem initialized
[    0.607375] initcall init_scsi+0x0/0x79 [scsi_mod] returned 0 after 188 usecs
[    0.610437] calling  ata_init+0x0/0x2be [libata] @ 88
[    0.610548] libata version 3.00 loaded.
[    0.610570] initcall ata_init+0x0/0x2be [libata] returned 0 after 107 usecs
[    0.612100] calling  serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 89
[    0.612132] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 25 usecs
[    0.612659] calling  ahci_pci_driver_init+0x0/0x1000 [ahci] @ 88
[    0.612715] ahci 0000:00:1f.2: version 3.0
[    0.613050] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.613153] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    0.613239] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    0.613915] calling  evdev_init+0x0/0x1000 [evdev] @ 85
[    0.614178] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 250 usecs
[    0.624366] scsi host0: ahci
[    0.630638] scsi host1: ahci
[    0.640413] scsi host2: ahci
[    0.646559] scsi host3: ahci
[    0.646752] ata1: SATA max UDMA/133 abar m1024@0xe4445000 port 0xe4445100 irq 28
[    0.646836] ata2: DUMMY
[    0.646902] ata3: DUMMY
[    0.646964] ata4: DUMMY
[    0.647098] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 33619 usecs
[    1.124129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.124605] ata1.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
[    1.124674] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.125179] ata1.00: configured for UDMA/100
[    1.125522] scsi 0:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2   070H PQ: 0 ANSI: 5
[    1.129127] calling  init_sd+0x0/0x1000 [sd_mod] @ 84
[    1.129268] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 129 usecs
[    1.129444] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.129550] sd 0:0:0:0: [sda] Write Protect is off
[    1.129619] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.129647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.130384]  sda: sda1 sda2
[    1.131009] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.213492] calling  dm_init+0x0/0x31 [dm_mod] @ 110
[    1.213535] device-mapper: uevent: version 1.0.3
[    1.213727] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx
[    1.213829] initcall dm_init+0x0/0x31 [dm_mod] returned 0 after 312 usecs
[    1.214434] calling  dm_crypt_init+0x0/0x1000 [dm_crypt] @ 110
[    1.214442] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 2 usecs
[    1.376157] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f648b8858, max_idle_ns: 440795225116 ns
[    7.339202] calling  crypto_cbc_module_init+0x0/0x1000 [cbc] @ 140
[    7.339210] initcall crypto_cbc_module_init+0x0/0x1000 [cbc] returned 0 after 2 usecs
[    7.563972] calling  aes_init+0x0/0x1000 [aes_i586] @ 186
[    7.564489] initcall aes_init+0x0/0x1000 [aes_i586] returned 0 after 497 usecs
[    7.565069] calling  cryptd_init+0x0/0x1000 [cryptd] @ 186
[    7.565085] initcall cryptd_init+0x0/0x1000 [cryptd] returned 0 after 8 usecs
[    7.565683] calling  aesni_init+0x0/0x113 [aesni_intel] @ 186
[    7.565691] initcall aesni_init+0x0/0x113 [aesni_intel] returned -19 after 1 usecs
[    7.596617] calling  padlock_init+0x0/0x1000 [padlock_aes] @ 186
[    7.596625] initcall padlock_init+0x0/0x1000 [padlock_aes] returned -19 after 2 usecs
[    7.636599] calling  crypto_ecb_module_init+0x0/0x1000 [ecb] @ 186
[    7.636606] initcall crypto_ecb_module_init+0x0/0x1000 [ecb] returned 0 after 2 usecs
[    7.637217] calling  fscrypt_init+0x0/0x1000 [fscrypto] @ 186
[    7.637287] initcall fscrypt_init+0x0/0x1000 [fscrypto] returned 0 after 60 usecs
[    7.637513] calling  crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] @ 186
[    7.637519] initcall crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] returned -19 after 1 usecs
[    7.676565] calling  crc32c_mod_init+0x0/0x1000 [crc32c_generic] @ 186
[    7.676629] initcall crc32c_mod_init+0x0/0x1000 [crc32c_generic] returned 0 after 56 usecs
[    7.678090] calling  journal_init+0x0/0x7e7 [jbd2] @ 186
[    7.678177] initcall journal_init+0x0/0x7e7 [jbd2] returned 0 after 71 usecs
[    7.678538] calling  mbcache_init+0x0/0x1000 [mbcache] @ 186
[    7.678548] initcall mbcache_init+0x0/0x1000 [mbcache] returned 0 after 4 usecs
[    7.685615] calling  ext4_init_fs+0x0/0x160 [ext4] @ 186
[    7.685727] initcall ext4_init_fs+0x0/0x160 [ext4] returned 0 after 74 usecs
[    7.758752] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    7.963382] random: crng init done
[    8.132428] calling  init_autofs4_fs+0x0/0x23 [autofs4] @ 1
[    8.132544] initcall init_autofs4_fs+0x0/0x23 [autofs4] returned 0 after 104 usecs
[    8.141855] calling  xt_init+0x0/0x1000 [x_tables] @ 1
[    8.141865] initcall xt_init+0x0/0x1000 [x_tables] returned 0 after 2 usecs
[    8.144129] calling  ip_tables_init+0x0/0x1000 [ip_tables] @ 1
[    8.144140] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.144215] initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 78 usecs
[    8.154861] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    8.172258] systemd[1]: Detected architecture x86.
[    8.178904] systemd[1]: Set hostname to <gm-debian>.
[    8.460384] systemd[1]: Listening on Journal Socket.
[    8.460887] systemd[1]: Created slice User and Session Slice.
[    8.461061] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.461261] systemd[1]: Listening on Syslog Socket.
[    8.461647] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.461824] systemd[1]: Reached target Remote File Systems.
[    8.462026] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.534859] calling  parport_default_proc_register+0x0/0x1000 [parport] @ 252
[    8.534894] initcall parport_default_proc_register+0x0/0x1000 [parport] returned 0 after 26 usecs
[    8.539973] calling  ppdev_init+0x0/0x1000 [ppdev] @ 252
[    8.554741] ppdev: user-space parallel port driver
[    8.554821] initcall ppdev_init+0x0/0x1000 [ppdev] returned 0 after 14489 usecs
[    9.239880] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[    9.299902] systemd-journald[250]: Received request to flush runtime journal from PID 1
[    9.668007] calling  acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 295
[    9.668674] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned 0 after 618 usecs
[    9.672829] calling  pcc_cpufreq_init+0x0/0xec1 [pcc_cpufreq] @ 295
[    9.672845] initcall pcc_cpufreq_init+0x0/0xec1 [pcc_cpufreq] returned -19 after 7 usecs
[    9.712643] calling  pcc_cpufreq_init+0x0/0xec1 [pcc_cpufreq] @ 293
[    9.712657] initcall pcc_cpufreq_init+0x0/0xec1 [pcc_cpufreq] returned -19 after 7 usecs
[    9.712864] calling  ledtrig_usb_init+0x0/0x1000 [usb_common] @ 299
[    9.712874] initcall ledtrig_usb_init+0x0/0x1000 [usb_common] returned 0 after 5 usecs
[    9.722295] calling  acpi_ac_init+0x0/0x1000 [ac] @ 290
[    9.722876] calling  shpcd_init+0x0/0x1000 [shpchp] @ 298
[    9.722920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.723000] initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 113 usecs
[    9.725306] calling  init_soundcore+0x0/0x1000 [soundcore] @ 292
[    9.725325] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 11 usecs
[    9.726822] calling  usb_init+0x0/0x146 [usbcore] @ 299
[    9.726840] ACPI: bus type USB registered
[    9.726951] usbcore: registered new interface driver usbfs
[    9.727034] usbcore: registered new interface driver hub
[    9.727133] usbcore: registered new device driver usb
[    9.727222] initcall usb_init+0x0/0x146 [usbcore] returned 0 after 367 usecs
[    9.735503] calling  alsa_sound_init+0x0/0x7d [snd] @ 292
[    9.735538] initcall alsa_sound_init+0x0/0x7d [snd] returned 0 after 21 usecs
[    9.736116] calling  ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 297
[    9.736120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.736209] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 82 usecs
[    9.748919] calling  uhci_hcd_init+0x0/0x1000 [uhci_hcd] @ 297
[    9.748923] uhci_hcd: USB Universal Host Controller Interface driver
[    9.749260] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    9.749339] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    9.749434] uhci_hcd 0000:00:1d.0: detected 2 ports
[    9.749540] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[    9.752574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    9.752648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.752733] usb usb1: Product: UHCI Host Controller
[    9.752799] usb usb1: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae uhci_hcd
[    9.752869] usb usb1: SerialNumber: 0000:00:1d.0
[    9.753181] hub 1-0:1.0: USB hub found
[    9.753261] hub 1-0:1.0: 2 ports detected
[    9.754851] calling  alsa_timer_init+0x0/0x1000 [snd_timer] @ 292
[    9.755355] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    9.758473] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 3525 usecs
[    9.758670] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    9.758767] uhci_hcd 0000:00:1d.1: detected 2 ports
[    9.758875] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[    9.759035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    9.759106] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.759189] usb usb2: Product: UHCI Host Controller
[    9.759256] usb usb2: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae uhci_hcd
[    9.759327] usb usb2: SerialNumber: 0000:00:1d.1
[    9.777188] hub 2-0:1.0: USB hub found
[    9.777277] hub 2-0:1.0: 2 ports detected
[    9.777603] calling  alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 292
[    9.777622] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 6 usecs
[    9.778083] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    9.782686] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    9.788889] uhci_hcd 0000:00:1d.2: detected 2 ports
[    9.792537] calling  alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 292
[    9.792550] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 7 usecs
[    9.792620] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    9.792915] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    9.792988] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.793074] usb usb3: Product: UHCI Host Controller
[    9.793143] usb usb3: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae uhci_hcd
[    9.793215] usb usb3: SerialNumber: 0000:00:1d.2
[    9.793402] calling  acpi_battery_init+0x0/0xf90 [battery] @ 298
[    9.793417] initcall acpi_battery_init+0x0/0xf90 [battery] returned 0 after 8 usecs
[    9.793926] calling  rfkill_init+0x0/0xcb [rfkill] @ 291
[    9.794485] initcall rfkill_init+0x0/0xcb [rfkill] returned 0 after 537 usecs
[    9.797745] calling  nvram_init+0x0/0x1000 [nvram] @ 291
[    9.799515] Non-volatile memory driver v1.3
[    9.799593] initcall nvram_init+0x0/0x1000 [nvram] returned 0 after 1794 usecs
[    9.803502] hub 3-0:1.0: USB hub found
[    9.803585] hub 3-0:1.0: 2 ports detected
[    9.810524] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    9.810609] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    9.810702] uhci_hcd 0000:00:1d.3: detected 2 ports
[    9.810807] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[    9.813331] calling  hda_bus_init+0x0/0xf [snd_hda_core] @ 292
[    9.813361] initcall hda_bus_init+0x0/0xf [snd_hda_core] returned 0 after 16 usecs
[    9.813784] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    9.813862] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.813947] usb usb4: Product: UHCI Host Controller
[    9.814015] usb usb4: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae uhci_hcd
[    9.814085] usb usb4: SerialNumber: 0000:00:1d.3
[    9.818833] hub 4-0:1.0: USB hub found
[    9.818926] hub 4-0:1.0: 2 ports detected
[    9.819240] initcall uhci_hcd_init+0x0/0x1000 [uhci_hcd] returned 0 after 68660 usecs
[    9.825921] calling  thinkpad_acpi_module_init+0x0/0xa5c [thinkpad_acpi] @ 291
[    9.826063] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    9.826133] thinkpad_acpi: http://ibm-acpi.sf.net/
[    9.826198] thinkpad_acpi: ThinkPad BIOS CBET4000 4.7-625-g0b861daecc, EC 7JHT12WW-3.4
[    9.826281] thinkpad_acpi: Lenovo ThinkPad X60 Tablet, model 636338U
[    9.832346] ACPI: AC Adapter [AC] (on-line)
[    9.832479] initcall acpi_ac_init+0x0/0x1000 [ac] returned 0 after 107591 usecs
[    9.835166] thinkpad_acpi: radio switch found; radios are disabled
[    9.835462] ACPI: Battery Slot [BAT0] (battery absent)
[    9.836231] ACPI: Battery Slot [BAT1] (battery absent)
[    9.839118] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    9.839355] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    9.839445] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    9.846412] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    9.849158] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    9.857082] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    9.857272] initcall thinkpad_acpi_module_init+0x0/0xa5c [thinkpad_acpi] returned 0 after 30594 usecs
[    9.871332] calling  azx_driver_init+0x0/0xfe4 [snd_hda_intel] @ 292
[    9.877470] calling  ehci_pci_init+0x0/0x1000 [ehci_pci] @ 300
[    9.877474] ehci-pci: EHCI PCI platform driver
[    9.882684] calling  pps_init+0x0/0x1000 [pps_core] @ 299
[    9.882702] pps_core: LinuxPPS API ver. 1 registered
[    9.882773] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    9.882864] initcall pps_init+0x0/0x1000 [pps_core] returned 0 after 168 usecs
[    9.883935] calling  hwrng_modinit+0x0/0x1000 [rng_core] @ 297
[    9.884656] calling  ptp_init+0x0/0x1000 [ptp] @ 299
[    9.884669] PTP clock support registered
[    9.884748] initcall ptp_init+0x0/0x1000 [ptp] returned 0 after 83 usecs
[    9.886166] calling  piix_init+0x0/0x1000 [ata_piix] @ 293
[    9.892029] calling  i2c_i801_init+0x0/0x1000 [i2c_i801] @ 298
[    9.892475] initcall hwrng_modinit+0x0/0x1000 [rng_core] returned 0 after 8330 usecs
[    9.904461] calling  mod_init+0x0/0xf56 [intel_rng] @ 297
[    9.904530] intel_rng: FWH not detected
[    9.904609] initcall mod_init+0x0/0xf56 [intel_rng] returned -19 after 138 usecs
[    9.918577] snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:2010
[    9.920268] initcall azx_driver_init+0x0/0xfe4 [snd_hda_intel] returned 0 after 47771 usecs
[    9.929665] calling  init_pcmcia_cs+0x0/0x1000 [pcmcia_core] @ 290
[    9.929685] initcall init_pcmcia_cs+0x0/0x1000 [pcmcia_core] returned 0 after 10 usecs
[    9.933322] calling  e1000_init_module+0x0/0x1000 [e1000e] @ 299
[    9.933326] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    9.933399] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    9.933854] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    9.934804] calling  nonstatic_sysfs_init+0x0/0x1000 [pcmcia_rsrc] @ 290
[    9.934811] initcall nonstatic_sysfs_init+0x0/0x1000 [pcmcia_rsrc] returned 0 after 1 usecs
[    9.954554] calling  yenta_cardbus_driver_init+0x0/0x1000 [yenta_socket] @ 290
[    9.954759] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[    9.955990] calling  fw_core_init+0x0/0x1000 [firewire_core] @ 289
[    9.965676] initcall fw_core_init+0x0/0x1000 [firewire_core] returned 0 after 9439 usecs
[    9.973418] calling  mmc_init+0x0/0x954 [mmc_core] @ 292
[    9.973477] initcall mmc_init+0x0/0x954 [mmc_core] returned 0 after 39 usecs
[    9.989531] calling  cfg80211_init+0x0/0xb8 [cfg80211] @ 291
[    9.989536] calling  init_sg+0x0/0x1000 [sg] @ 295
[    9.989848] initcall cfg80211_init+0x0/0xb8 [cfg80211] returned 0 after 264 usecs
[    9.992949] calling  generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 307
[    9.992981] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 21 usecs
[    9.994330] calling  analog_driver_init+0x0/0x1000 [snd_hda_codec_analog] @ 307
[    9.994634] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[    9.994729] snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.994814] snd_hda_codec_analog hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.994896] snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
[    9.994965] snd_hda_codec_analog hdaudioC0D0:    dig-out=0xa/0x0
[    9.995033] snd_hda_codec_analog hdaudioC0D0:    inputs:
[    9.995101] snd_hda_codec_analog hdaudioC0D0:      Mic=0x8
[    9.995168] snd_hda_codec_analog hdaudioC0D0:      CD=0x19
[    9.997747] calling  fw_ohci_init+0x0/0x1000 [firewire_ohci] @ 289
[   10.007561] calling  lpc_ich_driver_init+0x0/0x1000 [lpc_ich] @ 297
[   10.008094] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.008192] initcall init_sg+0x0/0x1000 [sg] returned 0 after 18204 usecs
[   10.018655] calling  sdhci_drv_init+0x0/0x1000 [sdhci] @ 292
[   10.018660] sdhci: Secure Digital Host Controller Interface driver
[   10.018737] sdhci: Copyright(c) Pierre Ossman
[   10.018810] initcall sdhci_drv_init+0x0/0x1000 [sdhci] returned 0 after 142 usecs
[   10.024359] calling  ieee80211_init+0x0/0x34 [mac80211] @ 291
[   10.024407] initcall ieee80211_init+0x0/0x34 [mac80211] returned 0 after 9 usecs
[   10.030025] initcall analog_driver_init+0x0/0x1000 [snd_hda_codec_analog] returned 0 after 34845 usecs
[   10.031862] calling  sdhci_driver_init+0x0/0x1000 [sdhci_pci] @ 292
[   10.032380] ehci-pci 0000:00:1d.7: EHCI Host Controller
[   10.032462] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   10.032561] ehci-pci 0000:00:1d.7: debug port 1
[   10.033999] calling  il3945_init+0x0/0x1000 [iwl3945] @ 291
[   10.034002] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   10.034122] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   10.034213] iwl3945: hw_scan is disabled
[   10.036555] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[   10.036641] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.038943] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
[   10.052048] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   10.052241] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[   10.052315] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.052494] usb usb5: Product: EHCI Host Controller
[   10.052591] usb usb5: Manufacturer: Linux 4.14.0-0.bpo.3-686-pae ehci_hcd
[   10.052697] usb usb5: SerialNumber: 0000:00:1d.7
[   10.086525] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:b8:e3:49
[   10.086677] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[   10.086939] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[   10.087806] initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 150834 usecs
[   10.088979] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[   10.089109] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[   10.089227] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
[   10.089380] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x3fff:
[   10.092171]  excluding 0x2000-0x20ff 0x2400-0x24ff
[   10.109899] hub 5-0:1.0: USB hub found
[   10.110045] hub 5-0:1.0: 8 ports detected
[   10.110681] usb usb1: root hub lost power or was reset
[   10.112478] hub 1-0:1.0: USB hub found
[   10.112721] hub 1-0:1.0: 2 ports detected
[   10.113059] usb usb2: root hub lost power or was reset
[   10.113332] hub 2-0:1.0: USB hub found
[   10.113415] hub 2-0:1.0: 2 ports detected
[   10.113725] usb usb3: root hub lost power or was reset
[   10.113874] hub 3-0:1.0: USB hub found
[   10.113952] hub 3-0:1.0: 2 ports detected
[   10.114249] usb usb4: root hub lost power or was reset
[   10.131026] calling  psmouse_init+0x0/0x7c [psmouse] @ 294
[   10.131106] initcall psmouse_init+0x0/0x7c [psmouse] returned 0 after 64 usecs
[   10.132919] hub 4-0:1.0: USB hub found
[   10.133011] hub 4-0:1.0: 2 ports detected
[   10.133281] ata_piix 0000:00:1f.1: version 2.13
[   10.134200] initcall ehci_pci_init+0x0/0x1000 [ehci_pci] returned 0 after 250703 usecs
[   10.140040] scsi host4: ata_piix
[   10.143886] scsi host5: ata_piix
[   10.144065] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50a0 irq 14
[   10.144136] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50a8 irq 15
[   10.144267] initcall piix_init+0x0/0x1000 [ata_piix] returned 0 after 252040 usecs
[   10.144537] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   10.145105] ata5: port disabled--ignoring
[   10.145187] ata6: port disabled--ignoring
[   10.145781] initcall i2c_i801_init+0x0/0x1000 [i2c_i801] returned 0 after 247793 usecs
[   10.145982] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170728/utaddress-247)
[   10.146108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.146201] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20170728/utaddress-247)
[   10.146327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.146422] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20170728/utaddress-247)
[   10.146539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.146645] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.150564] initcall lpc_ich_driver_init+0x0/0x1000 [lpc_ich] returned 0 after 139637 usecs
[   10.151299] calling  ata_generic_pci_driver_init+0x0/0x1000 [ata_generic] @ 293
[   10.151343] initcall ata_generic_pci_driver_init+0x0/0x1000 [ata_generic] returned 0 after 36 usecs
[   10.152241] calling  nas_gpio_init+0x0/0xfe9 [leds_ss4200] @ 297
[   10.152245] leds_ss4200: no LED devices found
[   10.152319] initcall nas_gpio_init+0x0/0xfe9 [leds_ss4200] returned -19 after 70 usecs
[   10.178817] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[   10.178914] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[   10.179012]  excluding 0xe1ef0000-0xe20fffff
[   10.179082] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[   10.179173] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[   10.179268]  excluding 0xe2100000-0xe40fffff
[   10.208858] iwl3945 0000:02:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[   10.208951] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   10.226292] initcall yenta_cardbus_driver_init+0x0/0x1000 [yenta_socket] returned 0 after 265350 usecs
[   10.248659] calling  vmx_init+0x0/0x5b1 [kvm_intel] @ 297
[   10.251670] initcall vmx_init+0x0/0x5b1 [kvm_intel] returned 0 after 2924 usecs
[   10.257490] calling  coretemp_init+0x0/0x1000 [coretemp] @ 297
[   10.258186] initcall coretemp_init+0x0/0x1000 [coretemp] returned 0 after 669 usecs
[   10.266826] calling  init_pcmcia_bus+0x0/0x1000 [pcmcia] @ 327
[   10.266864] initcall init_pcmcia_bus+0x0/0x1000 [pcmcia] returned 0 after 27 usecs
[   10.274419] calling  powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 297
[   10.274431] intel_powerclamp: No package C-state available
[   10.274437] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp] returned -19 after 9 usecs
[   10.280114] calling  arc4_init+0x0/0x1000 [arc4] @ 330
[   10.296092] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[   10.296255] initcall fw_ohci_init+0x0/0x1000 [firewire_ohci] returned 0 after 291499 usecs
[   10.296690] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[   10.296955] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   10.297052] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   10.300761] calling  powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 299
[   10.300774] intel_powerclamp: No package C-state available
[   10.300779] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp] returned -19 after 10 usecs
[   10.308830] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[   10.308957] initcall sdhci_driver_init+0x0/0x1000 [sdhci_pci] returned 0 after 270589 usecs
[   10.309127] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   10.319252] initcall arc4_init+0x0/0x1000 [arc4] returned 0 after 38209 usecs
[   10.333247] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   10.333677] initcall il3945_init+0x0/0x1000 [iwl3945] returned 0 after 292639 usecs
[   10.459652] e1000e 0000:01:00.0 eth8: renamed from eth0
[   10.543207] calling  iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] @ 295
[   10.543210] iTCO_vendor_support: vendor-support=0
[   10.543285] initcall iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] returned 0 after 70 usecs
[   10.545383] calling  iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] @ 295
[   10.545415] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.545555] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0560)
[   10.552002] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.552193] initcall iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] returned 0 after 6610 usecs
[   10.680624] IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready
[   10.682315] iwl3945 0000:02:00.0 wlan4: renamed from wlan0
[   10.816190] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
[   11.003070] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   11.020492] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[   11.116149] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[   11.170517] calling  init_misc_binfmt+0x0/0x1000 [binfmt_misc] @ 398
[   11.170531] initcall init_misc_binfmt+0x0/0x1000 [binfmt_misc] returned 0 after 6 usecs
[   12.898492] calling  serport_init+0x0/0x1000 [serport] @ 522
[   12.898501] initcall serport_init+0x0/0x1000 [serport] returned 0 after 1 usecs
[   12.898819] serio: Serial port ttyS0
[   12.902412] calling  w8001_drv_init+0x0/0x1000 [wacom_w8001] @ 524
[   12.902453] initcall w8001_drv_init+0x0/0x1000 [wacom_w8001] returned 0 after 32 usecs
[   14.208293] input: Wacom Serial Penabled Pen as /devices/pnp0/00:06/tty/ttyS0/serio2/input/input8
[   14.212795] calling  joydev_init+0x0/0x1000 [joydev] @ 526
[   14.212810] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after 8 usecs
[   14.849243] e1000e: eth8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   14.849516] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[   52.680347] calling  drm_core_init+0x0/0xce [drm] @ 636
[   52.680409] initcall drm_core_init+0x0/0xce [drm] returned 0 after 24 usecs
[   52.692960] calling  drm_kms_helper_init+0x0/0x14 [drm_kms_helper] @ 636
[   52.692982] initcall drm_kms_helper_init+0x0/0x14 [drm_kms_helper] returned 0 after 1 usecs
[   52.736553] calling  i915_init+0x0/0x51 [i915] @ 636
[   52.736987] pci 0000:00:00.0: Intel 945GM Chipset
[   52.737011] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[   52.737614] pci 0000:00:00.0: detected 8192K stolen memory
[   52.737705] [drm] Memory usable by graphics device = 256M
[   52.737711] [drm] Replacing VGA console driver
[   52.739466] Console: switching to colour dummy device 80x25
[   52.796935] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   52.796943] [drm] Driver supports precise vblank timestamp query.
[   52.797390] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   52.838803] [drm] RC6 disabled, disabling runtime PM support
[   52.838843] [drm] initialized overlay support
[   52.840804] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[   52.841075] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   52.853114] acpi device:04: registered as cooling_device3
[   52.854516] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   52.855858] initcall i915_init+0x0/0x51 [i915] returned 0 after 116406 usecs
[   52.884157] fbcon: inteldrmfb (fb0) is primary device
[   52.884331] Console: switching to colour frame buffer device 128x48
[   52.884349] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux