Re: [PATCH] ata: ahci-platform: add reset control support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 23-03-18 02:30, Kunihiko Hayashi wrote:
Add support to get and control a list of resets for the device
as optional and shared. These resets must be kept de-asserted until
the device is enabled.

This is specified as shared because some SoCs like UniPhier series
have common reset controls with all ahci controller instances.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>

Patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Regards,

Hans



---
  .../devicetree/bindings/ata/ahci-platform.txt      |  1 +
  drivers/ata/ahci.h                                 |  1 +
  drivers/ata/libahci_platform.c                     | 24 +++++++++++++++++++---
  3 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index c760ecb..f4006d3 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -30,6 +30,7 @@ compatible:
  Optional properties:
  - dma-coherent      : Present if dma operations are coherent
  - clocks            : a list of phandle + clock specifier pairs
+- resets            : a list of phandle + reset specifier pairs
  - target-supply     : regulator for SATA target power
  - phys              : reference to the SATA PHY node
  - phy-names         : must be "sata-phy"
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 749fd94..47ec77a2 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -347,6 +347,7 @@ struct ahci_host_priv {
  	u32			em_msg_type;	/* EM message type */
  	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
  	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
+	struct reset_control	*rsts;		/* Optional */
  	struct regulator	**target_pwrs;	/* Optional */
  	/*
  	 * If platform uses PHYs. There is a 1:1 relation between the port number and
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 341d0ef..3130db9 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -25,6 +25,7 @@
  #include <linux/phy/phy.h>
  #include <linux/pm_runtime.h>
  #include <linux/of_platform.h>
+#include <linux/reset.h>
  #include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -195,7 +196,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
   * following order:
   * 1) Regulator
   * 2) Clocks (through ahci_platform_enable_clks)
- * 3) Phys
+ * 3) Resets
+ * 4) Phys
   *
   * If resource enabling fails at any point the previous enabled resources
   * are disabled in reverse order.
@@ -215,12 +217,19 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
  	if (rc)
  		goto disable_regulator;
- rc = ahci_platform_enable_phys(hpriv);
+	rc = reset_control_deassert(hpriv->rsts);
  	if (rc)
  		goto disable_clks;
+ rc = ahci_platform_enable_phys(hpriv);
+	if (rc)
+		goto disable_resets;
+
  	return 0;
+disable_resets:
+	reset_control_assert(hpriv->rsts);
+
  disable_clks:
  	ahci_platform_disable_clks(hpriv);
@@ -239,12 +248,15 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
   * following order:
   * 1) Phys
   * 2) Clocks (through ahci_platform_disable_clks)
- * 3) Regulator
+ * 3) Resets
+ * 4) Regulator
   */
  void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
  {
  	ahci_platform_disable_phys(hpriv);
+ reset_control_assert(hpriv->rsts);
+
  	ahci_platform_disable_clks(hpriv);
ahci_platform_disable_regulators(hpriv);
@@ -393,6 +405,12 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
  		hpriv->clks[i] = clk;
  	}
+ hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
+	if (IS_ERR(hpriv->rsts)) {
+		rc = PTR_ERR(hpriv->rsts);
+		goto err_out;
+	}
+
  	hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
/*

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux